View FH34SRJ-45S-05SH_9043589.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. 1 2017.5 ? 5pq#puupndpoubdujnqspwftuifeftjhoqfyjcjmjuz 5bqfstpobmmjoofsxbmmt product length : l=0.5(n-1)+2.5 *n : number of positions depth : 3.8mm height : 1.0mm ? fh34srj differential impedance yqtsjtfujnf ? ? top/bottom contact ? smooth fpc / ffc insertion 5(35%5; 5jnf ot
dpoofdups '1$ 4 4qfd features 1. low-profile with the 1.0mm above the board and width of 3.8mm the connectors are used in space saving applications. 2. increased fpc/ffc retention as compared with existing similar construction connectors : * in horizontal direction : approximately 2.6 times higher * in vertical direction : approximately 2 times higher 3. unique back-flip rotating actuator the rotating actuator opens from the back of the connector, assuring reliable electrical and mechanical connection. 4. easy fpc insertion and reliable electrical connection proven flip lock actuator allows easy insertion of fpc and provides a tactile sensation when fully closed, confirming complete electrical and mechanical connection. 5. delivered with the actuator open fpc/fpc can be immediately inserted without the need for the opening of the actuator. 6. accepts standard fpc thickness 0.3mm thick standard flexible printed circuit (fpc) can be used. this is the only ultra-low profile zif connector using standard fpc. 7. conductive traces on the pcb can run under the connector no exposed contacts on the bottom of the connector. 8.halogen-free * *as defined by iec61249-2-21 br-900ppm maximum, cl-900ppm maximum, cl + br combined-1,500ppm maximum 9. board placement with automatic equipment flat upper surface and tape and reel packaging facilitate vacuum pick-up and placement. standard reel packaging contains 5000 connectors. fig.1 fig.2 fig.3 fig.4 ? 3.8mm depth 0.5mm pitch, 1.0mm above the board top and top/bottom contact, back-flip actuator flexible printed circuit & flexible flat cable zif connectors fh34srj series in cases where the application will demand a high level of reliability, such as automotive, please contact a company representative for further information. fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 2 product specifications ratings current rating 0.5a (note 1) voltage rating 50vrms ac operating temperature range : -55 to +85? (note 2) operating humidity range : relative humidity 90% max. (no condensation) storage temperature range : -10 to +50? (note 3) storage humidity range : relative humidity 90% max. (no condensation) recommended fpc/ffc thickness : 0.3 ?0.03 mm, gold plated contact pads item specification conditions 1. insulation resistance 500m?min. 100v dc 2. withstanding voltage no flashover or insulation breakdown 250vrms ac / 1 minute 3. contact resistance 100m?max. * including fpc and ffc conductor resistance 1ma, ac / dc 20mv max (ac : 1khz) 4. durability contact resistance : 100m?max. no damage, cracks, or parts dislocation 20cycles 5. vibration no electrical discontinuity of 1? or longer contact resistance : 100m?max. no damage, cracks, or parts dislocation frequency : 10 to 55 hz, single amplitude of 0.75 mm, 10 cycles in each of the 3 axis 6. shock no electrical discontinuity of 1? or longer contact resistance : 100m?max. no damage, cracks, or parts dislocation acceleration of 981m/s 2 , 6 ms duration, sine half- wave, 3 cycles in each of the 3 axis 7. humidity (steady state) contact resistance : 100m?max. insulation resistance : 50m?min. no damage, cracks, or parts dislocation 96 hours at 40? and humidity of 90 to 95% 8. temperature cycle contact resistance : 100m?max. insulation resistance : 50m?min. no damage, cracks, or parts dislocation temperature : -55? / +15? to +35? / +85? / +15? to +35? time: 30 / 2 to 3 / 30 / 2 to 3 minutes 5 cycles 9. resistance to soldering heat no deformation of components affecting performance reflow : at the recommended temperature profile manual soldering: 350? ?0? for 5 seconds (note 3) note1 : when passing the current through all of the contacts, use 70% of the rated current. note2 : includes temperature rise caused by current flow. note3 : the term "storage" refers to products stored for a long period prior to mounting and use. the operating temperature and humidity range covers the non-conducting condition of installed connectors in storage, shipment or during transportation after board mounting. materials / finish part material finish remarks insulator lcp color : gray ul94v-0 pa color : black lcp(8pos.) contacts phosphor bronze gold plating with nickel barrier ??? metalfittings phosphor bronze pure tin reflow plating ??? product number structure refer to the chart below when determining the product specifications from the product number. please select from the product numbers listed in this catalog when placing orders. fh 34s rj ? 30s ? 0.5 sh ( 50 ) ^ _ ` a b c d ^ series name : fh b contact pitch : 0.5mm _ series no. : 34s c termination type sh : smt horizontal mounting type ` rj top and bottom contact, halogen-free (flame retardance ul94v-0). d specifications (50)? standard product 5,000 pcs/reel (99)? 500 pcs/reel a number of contacts : 4 to 50 fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 3 number of contacts contact no.1 polarization mark cav no. number of contacts indicator hrs mark lot no. connector dimensions unit : mm part no. hrs no. no. of contacts abcd fh34srj-4s-0.5sh(50) 580-1238-7 50 4 4 1.5 2.53 3.38 fh34srj-5s-0.5sh(50) 580-1264-7 50 5 4.5 2 3.03 3.88 fh34srj-6s-0.5sh(50) 580-1236-1 50 6 5 2.5 3.53 4.38 fh34srj-7s-0.5sh(50) 580-1200-0 50 7 5.5 3 4.03 4.88 fh34srj-8s-0.5sh(50) 580-1231-8 50 8 6 3.5 4.53 5.38 fh34srj-9s-0.5sh(50) 580-1262-1 50 9 6.5 4 5.03 5.88 fh34srj-10s-0.5sh(50) 580-1251-5 50 10 7 4.5 5.53 6.38 fh34srj-11s-0.5sh(50) 580-1258-4 50 11 7.5 5 6.03 6.88 fh34srj-12s-0.5sh(50) 580-1253-0 50 12 8 5.5 6.53 7.38 fh34srj-14s-0.5sh(50) 580-1252-8 50 14 9 6.5 7.53 8.38 fh34srj-16s-0.5sh(50) 580-1259-7 50 16 10 7.5 8.57 9.38 fh34srj-18s-0.5sh(50) 580-1248-0 50 18 11 8.5 9.57 10.38 fh34srj-20s-0.5sh(50) 580-1256-9 50 20 12 9.5 10.57 11.38 fh34srj-22s-0.5sh(50) 580-1254-3 50 22 13 10.5 11.57 12.38 fh34srj-24s-0.5sh(50) 580-1255-6 50 24 14 11.5 12.57 13.38 fh34srj-26s-0.5sh(50) 580-1247-8 50 26 15 12.5 13.57 14.38 fh34srj-30s-0.5sh(50) 580-1232-0 50 30 17 14.5 15.57 16.38 fh34srj-34s-0.5sh(50) 580-1261-9 50 34 19 16.5 17.53 18.38 fh34srj-40s-0.5sh(50) 580-1260-6 50 40 22 19.5 20.53 21.38 fh34srj-45s-0.5sh(50) 580-1265-0 50 45 24.5 22 23.03 23.88 fh34srj-50s-0.5sh(50) 580-1266-2 50 50 27 24.5 25.53 26.38 tape and reel packaging. order by number of reels.

note 1 : the coplanarity of each terminal lead within specified dimension is 0.1mm max. note 2 : packaged on tape and reel only. check packaging specification. note 3 : slight variations in color of the plastic compounds do not affect form, fit or function of the connector. note 4 : after reflow, the terminal plating may change color, however this does not represent a quality issue. fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 4 recommended pcb mounting pattern b x 0.30.05 0.065 nx x 0.1 contact no.1 connector image : underside 0.25 0.25 2.9 0.15 0.15 0.185 0.5 e0.1 0.80.05 0.80.05 3.30.05 f0.1 /? recommended fpc/ffc dimensions unit : mm part no. hrs no. no. of contacts befg fh34srj-4s-0.5sh(50) 580-1238-7 50 4 1.5 3.1 3.9 2.5 fh34srj-5s-0.5sh(50) 580-1264-7 50 5 2 3.6 4.4 3 fh34srj-6s-0.5sh(50) 580-1236-1 50 6 2.5 4.1 4.9 3.5 fh34srj-7s-0.5sh(50) 580-1200-0 50 7 3 4.6 5.4 4 fh34srj-8s-0.5sh(50) 580-1231-8 50 8 3.5 5.1 5.9 4.5 fh34srj-9s-0.5sh(50) 580-1262-1 50 9 4 5.6 6.4 5 fh34srj-10s-0.5sh(50) 580-1251-5 50 10 4.5 6.1 6.9 5.5 fh34srj-11s-0.5sh(50) 580-1258-4 50 11 5 6.6 7.4 6 fh34srj-12s-0.5sh(50) 580-1253-0 50 12 5.5 7.1 7.9 6.5 fh34srj-14s-0.5sh(50) 580-1252-8 50 14 6.5 8.1 8.9 7.5 fh34srj-16s-0.5sh(50) 580-1259-7 50 16 7.5 9.1 9.9 8.5 fh34srj-18s-0.5sh(50) 580-1248-0 50 18 8.5 10.1 10.9 9.5 fh34srj-20s-0.5sh(50) 580-1256-9 50 20 9.5 11.1 11.9 10.5 fh34srj-22s-0.5sh(50) 580-1254-3 50 22 10.5 12.1 12.9 11.5 fh34srj-24s-0.5sh(50) 580-1255-6 50 24 11.5 13.1 13.9 12.5 fh34srj-26s-0.5sh(50) 580-1247-8 50 26 12.5 14.1 14.9 13.5 fh34srj-30s-0.5sh(50) 580-1232-0 50 30 14.5 16.1 16.9 15.5 fh34srj-34s-0.5sh(50) 580-1261-9 50 34 16.5 18.1 18.9 17.5 fh34srj-40s-0.5sh(50) 580-1260-6 50 40 19.5 21.1 21.9 20.5 fh34srj-45s-0.5sh(50) 580-1265-0 50 45 22 23.6 24.4 23 fh34srj-50s-0.5sh(50) 580-1266-2 50 50 24.5 26.1 26.9 25.5 nx contact no.1(top contact) (uncovered area) b 0.50.07 g0.05 0.50.07 r0.20.1 0.5 0.30.03 0.30.03 0.03 z z contact no.1(bottom contact) 1.50.3 2.50.3 (stiffener) p nx pcb mounting pattern image 0.250.03 0.650.03 3.30.03 0.80.03 e0.03 f0.03 0.5 b y y 0.03 recommended stencil pattern (recommended stencil thickness : t=0.1mm) note 1 : dimension p shall be 0.5mm min. note 2 : the recommended fpc pattern above has been designed only for fh34srj series. when using the fpc for fh19sc series (lower contact), uncoverd area shall be 2.50.3mm and stiffener shall be 3.5mm min. /? recommended pcb mounting pattern and metal mask dimensions y fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 5 /? recommended fpc construction 1. using single-sided fpc fpc : flexible printed circuit fpc : flexible printed circuit material name material material thickness (m) 2. using double-sided fpc 1. this specification is a recommendation for the construction of the fh34srj series fpc and ffc (t=0.3 0.03). 2. for details about the construction, please contact the fpc/ffc manufacturers. * to prevent release of the fpc due to its bending, use of the double sided fpc with copper foil on the back side is not recommended. covering film layer cover adhesive polyimide 1 mil thick 25 25 material name material material thickness (m) 3. using ffc ffc : flexible flat cable * tolerance of 20m. material name material material thickness (m) ? contact fpc manufacturer for specific details. surface treatment 0.2m thick gold plated over 1 to 5m thick nickel underplating 3 copper foil base adhesive base film reinforcement material adhesive stiffener cu 1oz thermosetting adhesive polyimide 1 mil thick thermosetting adhesive polyimide 7 mil thick 35 25 25 35 175 total 298 polyester film adhesive thermoplastic polyester (12) (30) 35 30 12 30 188 295 gold plated annealed copper foil adhesive polyester adhesive stiffener polyester polyester polyester total (25) (25) covering layer film cover adhesive polyimide 1 mil thick surface treatment 0.2m thick gold plated over 1 to 5m thick nickel underplating 3 through-hole copper copper foil base adhesive base film base adhesive cu cu 1/2oz thermosetting adhesive polyimide 1 mil thick 15 18 18 25 18 copper foil cover adhesive covering film layer reinforcement material adhesive stiffener cu 1/2oz thermosetting adhesive polyimide 1 mil thick thermosetting adhesive polyimide 4 mil thick (18) 25 25 50 100 total 297 fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 6 400mm min(leader) 100mm min (empty) 1600mm min (trailer ~ empty) embossed carrier tape top cover tape direction of unreeling (l : inside) ?13 (m : outside) ?380 ?80 24mm max direction of unreeling 40.1 1.95 80.1 ?1.5 +0.1 0 1.750.1 j0.1 h0.3 2 0.3 32mm min 40.1 80.1 ?1.5 +0.1 0 1.7 +0.15 0 2 0.3 1.95 1.750.1 j0.1 k0.1 h0.3 direction of unreeling 1.5 +0.1 0 /? packaging specification ? reel dimensions ? embossed carrier tape dimensions (tape width 24mm max.) ? embossed carrier tape dimensions (tape width 32mm min.) unit : mm part no. hrs no. no. of contacts hjklm fh34srj-4s-0.5sh(50) 580-1238-7 50 4 16 7.5 ? 17.4 21.4 fh34srj-5s-0.5sh(50) 580-1264-7 50 5 ? fh34srj-6s-0.5sh(50) 580-1236-1 50 6 ? fh34srj-7s-0.5sh(50) 580-1200-0 50 7 ? fh34srj-8s-0.5sh(50) 580-1231-8 50 8 ? fh34srj-9s-0.5sh(50) 580-1262-1 50 9 ? fh34srj-10s-0.5sh(50) 580-1251-5 50 10 ? fh34srj-11s-0.5sh(50) 580-1258-4 50 11 ? fh34srj-12s-0.5sh(50) 580-1253-0 50 12 24 11.5 ? 25.4 29.4 fh34srj-14s-0.5sh(50) 580-1252-8 50 14 ? fh34srj-16s-0.5sh(50) 580-1259-7 50 16 ? fh34srj-18s-0.5sh(50) 580-1248-0 50 18 ? fh34srj-20s-0.5sh(50) 580-1256-9 50 20 ? fh34srj-22s-0.5sh(50) 580-1254-3 50 22 ? fh34srj-24s-0.5sh(50) 580-1255-6 50 24 ? fh34srj-26s-0.5sh(50) 580-1247-8 50 26 ? fh34srj-30s-0.5sh(50) 580-1232-0 50 30 32 14.2 28.4 33.4 37.4 fh34srj-34s-0.5sh(50) 580-1261-9 50 34 fh34srj-40s-0.5sh(50) 580-1260-6 50 40 44 20.2 40.4 45.4 49.4 fh34srj-45s-0.5sh(50) 580-1265-0 50 45 fh34srj-50s-0.5sh(50) 580-1266-2 50 50 fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 7 max 250? start temperature(?) time (seconds) 25? (60 sec.) (60 sec.) 90 to 120 sec. preheating soldering 0 50 100 150 150? 200? 230? 200 250 hrs test condition solder method : reflow, ir/hot air environment : room air solder composition : paste, 96.5%sn/3.0%ag/0.5%cu (senju metal industry, co., ltd.'s part number: m705-221cm5-42-10.5) test board : glass epoxy 18.3mm32.85mm0.8mm thick land dimensions : 0.3mm0.8mm metal mask : 0.250.650.1mm thick the temperature profiles shown are based on the above conditions. in individual applications the actual temperature may vary, depending on solder paste type, volume / thickness and board size / thickness. consult your solder paste and equipment manufacturer for specific recommendations. /? temperature profile fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 8 actuator open actuator close pcb pcb fpc fpc /? operation and precautions operation 1. as delivered 2. fpc/ffc insertion 3. fpc/ffc insertion (the top contact specification) delivered with the actuator open. there is no need to operate the actuator prior to inserting the fpc/ffc. | precautions ~ do not close the actuator without the fpc/fpc inserted. be sure that the fpc is parallel to the surface of the pcb, then completely insert into the connector. | caution ~ do not attempt to insert the fpc if actuator is closed. ~ if the actuator is closed and if the fpc is twisted during insertion, it can cause contact deformation and / or contact failure. proper insertion skewed insertion shallow insertion ^ insert the fpc/ffc with the conductive surfaces facing up. align the fpc/ffc straight with the connector and insert it firmly all the way. caution : handle connectors carefully, as they are very small and thin. please refer to this section for verification of the following points: ^ the actuator packaged in the open condition. the actuator packaged in the open condition. boundary of fpc pattern edge of housing opening boundary of fpc pattern edge of housing opening ^ exercise care when handling connectors. follow recommendations given below. fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 9 operation do not press down on the actuator or housing do not press down on the actuator or housing lift at the center lift at the center do not rotate the actuator by the ends do not rotate the actuator by the ends flip actuator up to open flip actuator up to open do not apply force to the actuator in the direction shown when it is fully open. opening to an angle greater than 90c will break or damage the connector. do not apply force to the actuator in the direction shown when it is fully open. opening to an angle greater than 90c will break or damage the connector. lift at the center lift at the center do not rotate the actuator by the ends do not rotate the actuator by the ends . locking . fpcffc remoal lock release ^ after fpc/ffc insertion, rotate the actuator down to a full stop, pushing it at the center. ^ carefully rotate the actuator up to 90? lifting it at the center. * this connector uses a back flip type structure. the insert direction of the fpc and the actuator are different from front flip type connectors. do not to try to open the actuator from the fpc side. /? operation and precautions rotate rotate fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 10 fpc fpc stiffener film pcb pcb stiffener film component part pcb operation 6. fpc routing ^ fpc should be routed in a manner that no strain or load is exerted onto the fpc. placing any strain on the fpc may result in unintentional disconnect or damage to the fpc, which can lead to issues such as contact failure. | caution ~ do not allow the fpc or stiffener to touch the casings, housings or any other items. ~ when routing the fpc, make sure that no strain or load is applied to the connector in a pulling, pushing or side-to-side motion. additionally, make sure that no excessive upward or downward force is applied to the connector. ~ when routing the fpc, make sure that there is a stress free path for the fpc and the stiffener is parallel to the pcb. observe correct bend radiuses. ~ do not place or mount any parts that will interfere with the fpc routing. /? operation and precautions e fpc routing . fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 11 /? operation and precautions precautions when mounting connectors on the pcb s handling before mounting on pcb y insertion of the fpc/ffc or operation of the actuator prior to mounting on the pcb is not recommended. s pc board warpage minimize the warpage as much as possible. the connecto r are straight within 0.1 mm max. make sure that the mounting area flatness can accept the connector terminals without caus ing any failure of the solder joints. s forces on the board s when braking the large pc board into individual boards exercise care not to damage the installed connectors. s when attaching the boards or other components with the screws make sure that any stresses will not cause board deflections affecting the mounting areas of the connector. s when hand soldering: ?do not perform hand soldering with the fpc inserted in the connector. * do not apply excessive heat or touch the soldering iron anywhere other than the connector leads. * do not use excessive amount of solder or flux compounds. operation of the actuator or contacts may be affected by excessive amounts of solder or flux compounds. connectors pcb fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 12 the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 05/2017. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? usa: hirose electric (u.s.a.), inc. san jose office 2841 junction ave, suite 200 san jose, ca. 95134 phone : +1-408-253-9640 fax : +1-408-253-9641 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. detroit office (automotive) 17197 n. laurel park drive, suite 253, livonia, mi 48152 phone : +1-734-542-9963 fax : +1-734-542-9964 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. boston office 300 brickstone square suite 201, andover, ma 01810 phone : +1-978-662-5255 usa: hirose electric (u.s.a.), inc. headquarters chicago office 2300 warrenville road, suite 150, downers grove, il 60515 phone : +1-630-282-6700 http://www.hirose.com/us/ china: hirose electric technologies (shenzhen) co., ltd. room 09-13, 19/f, office tower shun hing square, di wang commercial centre, 5002 shen nan dong road, shenzhen city, guangdong province, 518008 phone : +86-755-8207-0851 fax : +86-755-8207-0873 http://www.hirose.com/cn/ korea: hirose korea co.,ltd. 250, huimanggongwon-ro, siheung-si, gyeonggi-do, korea, 15083 phone : +82-31-496-7000 or 7124 fax : +82-31-496-7100 http://www.hirose.co.kr/ germany: hirose electric europe b.v. nuremberg office neumeyerstrasse 22-26, 90411 nurnberg phone : +49-911 32 68 89 63 fax : +49-911 32 68 89 69 http://www.hirose.com/eu/ germany: hirose electric europe b.v. hanover office bayernstr. 3, haus c 30855 langenhagen, germany phone : +49-511 97 82 61 30 fax : +49-511 97 82 61 35 http://www.hirose.com/eu/ germany: hirose electric europe b.v. german branch schoenbergstr. 20, 73760 ostfildern phone : +49-711-456002-1 fax : +49-711-456002-299 http://www.hirose.com/eu/ france: hirose electric europe b.v. paris office regus la garenne colombes,place de la belgique, 71 boulevard national la garenne colombes, 92250, france phone : +33 (0) 1 7082 3170 fax : +33 (1) 7082 3101 http://www.hirose.com/eu/ the netherlands: hirose electric europe b.v. hogehillweg #8 1101 cc amsterdam z-o phone : +31-20-6557460 fax : +31-20-6557469 http://www.hirose.com/eu/ united kingdom: hirose electric europe bv (uk branch) 4 newton court, kelvin drive, knowlhill, milton keynes, mk5 8nh phone : +44-1908 202050 fax : +44-1908 202058 http://www.hirose.com/eu/ china: hirose electric (shanghai) co., ltd. 18, enterprise center tower 2, 209# gong he road, jing?an district, shanghai, china 200070 phone : +86-21-6391-3355 fax : +86-21-6391-3335 http://www.hirose.com/cn/ china: hirose electric (shanghai) co.,ltd. beijing branch a1001, ocean international center, building 56# east 4th ring middle road, chaoyang district, beijing, 100025 phone : +86-10-5165-9332 fax : +86-10-5908-1381 http://www.hirose.com/cn/ taiwan: hirose electric taiwan co., ltd. 103 8f, no.87, zhengzhou rd., taipei phone : +886-2-2555-7377 fax : +886-2-2555-7350 http://www.hirose.com/tw/ hong kong: hirose electric hongkong trading co., ltd. room 1001, west wing, tsim sha tsui centre, 66 mody road, tsim sha tsui east, kowloon, hong kong phone : +852-2803-5338 fax : +852-2591-6560 http://www.hirose.com/hk/ india: hirose electric singapore pte. ltd. delhi liaison office office no.552, regus-green bo ulevard, level5, tower c, sec62, plot b-9a, block b, noida, 201301, uttar pradesh, india phone : +91-12-660-8018 fax : +91-120-4804949 http://www.hirose.com/sg/ singapore: hirose electric singapore pte. ltd. 10 anson road #26-16, international plaza 079903, singapore phone : +65-6324-6113 fax : + 65-6324-6123 http://www.hirose.com/sg/ india: hirose electric singapore pte. ltd. bangalore liaison office unit no-403, 4th floor, no-84, barton centre, mahatma gandhi (mg) road, bangalore 560 001, karnataka, india phone : +91-80-4120 1907 fax : +91-80-4120 9908 http://www.hirose.com/sg/ malaysia: penang representative office 1-21-01, suntech @ penang cybercity (1164), lintang mayang pasir 3,11950, bayan baru, penang, malaysia. phone : +604-619-2564 fax : +604-619-2574 http://www.hirose.com/sg/ thailand: bangkok office (representative office) unit 4703, 47th fl., 1 empire tower, south sathorn road, yannawa, sathorn, bangkok 10120 thailand phone : +66-2-686-1255 fax : +66-2-686-3433 http://www.hirose.com/sg/
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. 1 2017.5 ? 5pq#puupndpoubdujnqspwftuifeftjhoqfyjcjmjuz 5bqfstpobmmjoofsxbmmt product length : l=0.5(n-1)+2.5 *n : number of positions depth : 3.8mm height : 1.0mm ? fh34srj differential impedance yqtsjtfujnf ? ? top/bottom contact ? smooth fpc / ffc insertion 5(35%5; 5jnf ot
dpoofdups '1$ 4 4qfd features 1. low-profile with the 1.0mm above the board and width of 3.8mm the connectors are used in space saving applications. 2. increased fpc/ffc retention as compared with existing similar construction connectors : * in horizontal direction : approximately 2.6 times higher * in vertical direction : approximately 2 times higher 3. unique back-flip rotating actuator the rotating actuator opens from the back of the connector, assuring reliable electrical and mechanical connection. 4. easy fpc insertion and reliable electrical connection proven flip lock actuator allows easy insertion of fpc and provides a tactile sensation when fully closed, confirming complete electrical and mechanical connection. 5. delivered with the actuator open fpc/fpc can be immediately inserted without the need for the opening of the actuator. 6. accepts standard fpc thickness 0.3mm thick standard flexible printed circuit (fpc) can be used. this is the only ultra-low profile zif connector using standard fpc. 7. conductive traces on the pcb can run under the connector no exposed contacts on the bottom of the connector. 8.halogen-free * *as defined by iec61249-2-21 br-900ppm maximum, cl-900ppm maximum, cl + br combined-1,500ppm maximum 9. board placement with automatic equipment flat upper surface and tape and reel packaging facilitate vacuum pick-up and placement. standard reel packaging contains 5000 connectors. fig.1 fig.2 fig.3 fig.4 ? 3.8mm depth 0.5mm pitch, 1.0mm above the board top and top/bottom contact, back-flip actuator flexible printed circuit & flexible flat cable zif connectors fh34srj series in cases where the application will demand a high level of reliability, such as automotive, please contact a company representative for further information. fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 2 product specifications ratings current rating 0.5a (note 1) voltage rating 50vrms ac operating temperature range : -55 to +85? (note 2) operating humidity range : relative humidity 90% max. (no condensation) storage temperature range : -10 to +50? (note 3) storage humidity range : relative humidity 90% max. (no condensation) recommended fpc/ffc thickness : 0.3 ?0.03 mm, gold plated contact pads item specification conditions 1. insulation resistance 500m?min. 100v dc 2. withstanding voltage no flashover or insulation breakdown 250vrms ac / 1 minute 3. contact resistance 100m?max. * including fpc and ffc conductor resistance 1ma, ac / dc 20mv max (ac : 1khz) 4. durability contact resistance : 100m?max. no damage, cracks, or parts dislocation 20cycles 5. vibration no electrical discontinuity of 1? or longer contact resistance : 100m?max. no damage, cracks, or parts dislocation frequency : 10 to 55 hz, single amplitude of 0.75 mm, 10 cycles in each of the 3 axis 6. shock no electrical discontinuity of 1? or longer contact resistance : 100m?max. no damage, cracks, or parts dislocation acceleration of 981m/s 2 , 6 ms duration, sine half- wave, 3 cycles in each of the 3 axis 7. humidity (steady state) contact resistance : 100m?max. insulation resistance : 50m?min. no damage, cracks, or parts dislocation 96 hours at 40? and humidity of 90 to 95% 8. temperature cycle contact resistance : 100m?max. insulation resistance : 50m?min. no damage, cracks, or parts dislocation temperature : -55? / +15? to +35? / +85? / +15? to +35? time: 30 / 2 to 3 / 30 / 2 to 3 minutes 5 cycles 9. resistance to soldering heat no deformation of components affecting performance reflow : at the recommended temperature profile manual soldering: 350? ?0? for 5 seconds (note 3) note1 : when passing the current through all of the contacts, use 70% of the rated current. note2 : includes temperature rise caused by current flow. note3 : the term "storage" refers to products stored for a long period prior to mounting and use. the operating temperature and humidity range covers the non-conducting condition of installed connectors in storage, shipment or during transportation after board mounting. materials / finish part material finish remarks insulator lcp color : gray ul94v-0 pa color : black lcp(8pos.) contacts phosphor bronze gold plating with nickel barrier ??? metalfittings phosphor bronze pure tin reflow plating ??? product number structure refer to the chart below when determining the product specifications from the product number. please select from the product numbers listed in this catalog when placing orders. fh 34s rj ? 30s ? 0.5 sh ( 50 ) ^ _ ` a b c d ^ series name : fh b contact pitch : 0.5mm _ series no. : 34s c termination type sh : smt horizontal mounting type ` rj top and bottom contact, halogen-free (flame retardance ul94v-0). d specifications (50)? standard product 5,000 pcs/reel (99)? 500 pcs/reel a number of contacts : 4 to 50 fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 3 number of contacts contact no.1 polarization mark cav no. number of contacts indicator hrs mark lot no. connector dimensions unit : mm part no. hrs no. no. of contacts abcd fh34srj-4s-0.5sh(50) 580-1238-7 50 4 4 1.5 2.53 3.38 fh34srj-5s-0.5sh(50) 580-1264-7 50 5 4.5 2 3.03 3.88 fh34srj-6s-0.5sh(50) 580-1236-1 50 6 5 2.5 3.53 4.38 fh34srj-7s-0.5sh(50) 580-1200-0 50 7 5.5 3 4.03 4.88 fh34srj-8s-0.5sh(50) 580-1231-8 50 8 6 3.5 4.53 5.38 fh34srj-9s-0.5sh(50) 580-1262-1 50 9 6.5 4 5.03 5.88 fh34srj-10s-0.5sh(50) 580-1251-5 50 10 7 4.5 5.53 6.38 fh34srj-11s-0.5sh(50) 580-1258-4 50 11 7.5 5 6.03 6.88 fh34srj-12s-0.5sh(50) 580-1253-0 50 12 8 5.5 6.53 7.38 fh34srj-14s-0.5sh(50) 580-1252-8 50 14 9 6.5 7.53 8.38 fh34srj-16s-0.5sh(50) 580-1259-7 50 16 10 7.5 8.57 9.38 fh34srj-18s-0.5sh(50) 580-1248-0 50 18 11 8.5 9.57 10.38 fh34srj-20s-0.5sh(50) 580-1256-9 50 20 12 9.5 10.57 11.38 fh34srj-22s-0.5sh(50) 580-1254-3 50 22 13 10.5 11.57 12.38 fh34srj-24s-0.5sh(50) 580-1255-6 50 24 14 11.5 12.57 13.38 fh34srj-26s-0.5sh(50) 580-1247-8 50 26 15 12.5 13.57 14.38 fh34srj-30s-0.5sh(50) 580-1232-0 50 30 17 14.5 15.57 16.38 fh34srj-34s-0.5sh(50) 580-1261-9 50 34 19 16.5 17.53 18.38 fh34srj-40s-0.5sh(50) 580-1260-6 50 40 22 19.5 20.53 21.38 fh34srj-45s-0.5sh(50) 580-1265-0 50 45 24.5 22 23.03 23.88 fh34srj-50s-0.5sh(50) 580-1266-2 50 50 27 24.5 25.53 26.38 tape and reel packaging. order by number of reels.

note 1 : the coplanarity of each terminal lead within specified dimension is 0.1mm max. note 2 : packaged on tape and reel only. check packaging specification. note 3 : slight variations in color of the plastic compounds do not affect form, fit or function of the connector. note 4 : after reflow, the terminal plating may change color, however this does not represent a quality issue. fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 4 recommended pcb mounting pattern b x 0.30.05 0.065 nx x 0.1 contact no.1 connector image : underside 0.25 0.25 2.9 0.15 0.15 0.185 0.5 e0.1 0.80.05 0.80.05 3.30.05 f0.1 /? recommended fpc/ffc dimensions unit : mm part no. hrs no. no. of contacts befg fh34srj-4s-0.5sh(50) 580-1238-7 50 4 1.5 3.1 3.9 2.5 fh34srj-5s-0.5sh(50) 580-1264-7 50 5 2 3.6 4.4 3 fh34srj-6s-0.5sh(50) 580-1236-1 50 6 2.5 4.1 4.9 3.5 fh34srj-7s-0.5sh(50) 580-1200-0 50 7 3 4.6 5.4 4 fh34srj-8s-0.5sh(50) 580-1231-8 50 8 3.5 5.1 5.9 4.5 fh34srj-9s-0.5sh(50) 580-1262-1 50 9 4 5.6 6.4 5 fh34srj-10s-0.5sh(50) 580-1251-5 50 10 4.5 6.1 6.9 5.5 fh34srj-11s-0.5sh(50) 580-1258-4 50 11 5 6.6 7.4 6 fh34srj-12s-0.5sh(50) 580-1253-0 50 12 5.5 7.1 7.9 6.5 fh34srj-14s-0.5sh(50) 580-1252-8 50 14 6.5 8.1 8.9 7.5 fh34srj-16s-0.5sh(50) 580-1259-7 50 16 7.5 9.1 9.9 8.5 fh34srj-18s-0.5sh(50) 580-1248-0 50 18 8.5 10.1 10.9 9.5 fh34srj-20s-0.5sh(50) 580-1256-9 50 20 9.5 11.1 11.9 10.5 fh34srj-22s-0.5sh(50) 580-1254-3 50 22 10.5 12.1 12.9 11.5 fh34srj-24s-0.5sh(50) 580-1255-6 50 24 11.5 13.1 13.9 12.5 fh34srj-26s-0.5sh(50) 580-1247-8 50 26 12.5 14.1 14.9 13.5 fh34srj-30s-0.5sh(50) 580-1232-0 50 30 14.5 16.1 16.9 15.5 fh34srj-34s-0.5sh(50) 580-1261-9 50 34 16.5 18.1 18.9 17.5 fh34srj-40s-0.5sh(50) 580-1260-6 50 40 19.5 21.1 21.9 20.5 fh34srj-45s-0.5sh(50) 580-1265-0 50 45 22 23.6 24.4 23 fh34srj-50s-0.5sh(50) 580-1266-2 50 50 24.5 26.1 26.9 25.5 nx contact no.1(top contact) (uncovered area) b 0.50.07 g0.05 0.50.07 r0.20.1 0.5 0.30.03 0.30.03 0.03 z z contact no.1(bottom contact) 1.50.3 2.50.3 (stiffener) p nx pcb mounting pattern image 0.250.03 0.650.03 3.30.03 0.80.03 e0.03 f0.03 0.5 b y y 0.03 recommended stencil pattern (recommended stencil thickness : t=0.1mm) note 1 : dimension p shall be 0.5mm min. note 2 : the recommended fpc pattern above has been designed only for fh34srj series. when using the fpc for fh19sc series (lower contact), uncoverd area shall be 2.50.3mm and stiffener shall be 3.5mm min. /? recommended pcb mounting pattern and metal mask dimensions y fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 5 /? recommended fpc construction 1. using single-sided fpc fpc : flexible printed circuit fpc : flexible printed circuit material name material material thickness (m) 2. using double-sided fpc 1. this specification is a recommendation for the construction of the fh34srj series fpc and ffc (t=0.3 0.03). 2. for details about the construction, please contact the fpc/ffc manufacturers. * to prevent release of the fpc due to its bending, use of the double sided fpc with copper foil on the back side is not recommended. covering film layer cover adhesive polyimide 1 mil thick 25 25 material name material material thickness (m) 3. using ffc ffc : flexible flat cable * tolerance of 20m. material name material material thickness (m) ? contact fpc manufacturer for specific details. surface treatment 0.2m thick gold plated over 1 to 5m thick nickel underplating 3 copper foil base adhesive base film reinforcement material adhesive stiffener cu 1oz thermosetting adhesive polyimide 1 mil thick thermosetting adhesive polyimide 7 mil thick 35 25 25 35 175 total 298 polyester film adhesive thermoplastic polyester (12) (30) 35 30 12 30 188 295 gold plated annealed copper foil adhesive polyester adhesive stiffener polyester polyester polyester total (25) (25) covering layer film cover adhesive polyimide 1 mil thick surface treatment 0.2m thick gold plated over 1 to 5m thick nickel underplating 3 through-hole copper copper foil base adhesive base film base adhesive cu cu 1/2oz thermosetting adhesive polyimide 1 mil thick 15 18 18 25 18 copper foil cover adhesive covering film layer reinforcement material adhesive stiffener cu 1/2oz thermosetting adhesive polyimide 1 mil thick thermosetting adhesive polyimide 4 mil thick (18) 25 25 50 100 total 297 fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 6 400mm min(leader) 100mm min (empty) 1600mm min (trailer ~ empty) embossed carrier tape top cover tape direction of unreeling (l : inside) ?13 (m : outside) ?380 ?80 24mm max direction of unreeling 40.1 1.95 80.1 ?1.5 +0.1 0 1.750.1 j0.1 h0.3 2 0.3 32mm min 40.1 80.1 ?1.5 +0.1 0 1.7 +0.15 0 2 0.3 1.95 1.750.1 j0.1 k0.1 h0.3 direction of unreeling 1.5 +0.1 0 /? packaging specification ? reel dimensions ? embossed carrier tape dimensions (tape width 24mm max.) ? embossed carrier tape dimensions (tape width 32mm min.) unit : mm part no. hrs no. no. of contacts hjklm fh34srj-4s-0.5sh(50) 580-1238-7 50 4 16 7.5 ? 17.4 21.4 fh34srj-5s-0.5sh(50) 580-1264-7 50 5 ? fh34srj-6s-0.5sh(50) 580-1236-1 50 6 ? fh34srj-7s-0.5sh(50) 580-1200-0 50 7 ? fh34srj-8s-0.5sh(50) 580-1231-8 50 8 ? fh34srj-9s-0.5sh(50) 580-1262-1 50 9 ? fh34srj-10s-0.5sh(50) 580-1251-5 50 10 ? fh34srj-11s-0.5sh(50) 580-1258-4 50 11 ? fh34srj-12s-0.5sh(50) 580-1253-0 50 12 24 11.5 ? 25.4 29.4 fh34srj-14s-0.5sh(50) 580-1252-8 50 14 ? fh34srj-16s-0.5sh(50) 580-1259-7 50 16 ? fh34srj-18s-0.5sh(50) 580-1248-0 50 18 ? fh34srj-20s-0.5sh(50) 580-1256-9 50 20 ? fh34srj-22s-0.5sh(50) 580-1254-3 50 22 ? fh34srj-24s-0.5sh(50) 580-1255-6 50 24 ? fh34srj-26s-0.5sh(50) 580-1247-8 50 26 ? fh34srj-30s-0.5sh(50) 580-1232-0 50 30 32 14.2 28.4 33.4 37.4 fh34srj-34s-0.5sh(50) 580-1261-9 50 34 fh34srj-40s-0.5sh(50) 580-1260-6 50 40 44 20.2 40.4 45.4 49.4 fh34srj-45s-0.5sh(50) 580-1265-0 50 45 fh34srj-50s-0.5sh(50) 580-1266-2 50 50 fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 7 max 250? start temperature(?) time (seconds) 25? (60 sec.) (60 sec.) 90 to 120 sec. preheating soldering 0 50 100 150 150? 200? 230? 200 250 hrs test condition solder method : reflow, ir/hot air environment : room air solder composition : paste, 96.5%sn/3.0%ag/0.5%cu (senju metal industry, co., ltd.'s part number: m705-221cm5-42-10.5) test board : glass epoxy 18.3mm32.85mm0.8mm thick land dimensions : 0.3mm0.8mm metal mask : 0.250.650.1mm thick the temperature profiles shown are based on the above conditions. in individual applications the actual temperature may vary, depending on solder paste type, volume / thickness and board size / thickness. consult your solder paste and equipment manufacturer for specific recommendations. /? temperature profile fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 8 actuator open actuator close pcb pcb fpc fpc /? operation and precautions operation 1. as delivered 2. fpc/ffc insertion 3. fpc/ffc insertion (the top contact specification) delivered with the actuator open. there is no need to operate the actuator prior to inserting the fpc/ffc. | precautions ~ do not close the actuator without the fpc/fpc inserted. be sure that the fpc is parallel to the surface of the pcb, then completely insert into the connector. | caution ~ do not attempt to insert the fpc if actuator is closed. ~ if the actuator is closed and if the fpc is twisted during insertion, it can cause contact deformation and / or contact failure. proper insertion skewed insertion shallow insertion ^ insert the fpc/ffc with the conductive surfaces facing up. align the fpc/ffc straight with the connector and insert it firmly all the way. caution : handle connectors carefully, as they are very small and thin. please refer to this section for verification of the following points: ^ the actuator packaged in the open condition. the actuator packaged in the open condition. boundary of fpc pattern edge of housing opening boundary of fpc pattern edge of housing opening ^ exercise care when handling connectors. follow recommendations given below. fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 9 operation do not press down on the actuator or housing do not press down on the actuator or housing lift at the center lift at the center do not rotate the actuator by the ends do not rotate the actuator by the ends flip actuator up to open flip actuator up to open do not apply force to the actuator in the direction shown when it is fully open. opening to an angle greater than 90c will break or damage the connector. do not apply force to the actuator in the direction shown when it is fully open. opening to an angle greater than 90c will break or damage the connector. lift at the center lift at the center do not rotate the actuator by the ends do not rotate the actuator by the ends . locking . fpcffc remoal lock release ^ after fpc/ffc insertion, rotate the actuator down to a full stop, pushing it at the center. ^ carefully rotate the actuator up to 90? lifting it at the center. * this connector uses a back flip type structure. the insert direction of the fpc and the actuator are different from front flip type connectors. do not to try to open the actuator from the fpc side. /? operation and precautions rotate rotate fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 10 fpc fpc stiffener film pcb pcb stiffener film component part pcb operation 6. fpc routing ^ fpc should be routed in a manner that no strain or load is exerted onto the fpc. placing any strain on the fpc may result in unintentional disconnect or damage to the fpc, which can lead to issues such as contact failure. | caution ~ do not allow the fpc or stiffener to touch the casings, housings or any other items. ~ when routing the fpc, make sure that no strain or load is applied to the connector in a pulling, pushing or side-to-side motion. additionally, make sure that no excessive upward or downward force is applied to the connector. ~ when routing the fpc, make sure that there is a stress free path for the fpc and the stiffener is parallel to the pcb. observe correct bend radiuses. ~ do not place or mount any parts that will interfere with the fpc routing. /? operation and precautions e fpc routing . fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 11 /? operation and precautions precautions when mounting connectors on the pcb s handling before mounting on pcb y insertion of the fpc/ffc or operation of the actuator prior to mounting on the pcb is not recommended. s pc board warpage minimize the warpage as much as possible. the connecto r are straight within 0.1 mm max. make sure that the mounting area flatness can accept the connector terminals without caus ing any failure of the solder joints. s forces on the board s when braking the large pc board into individual boards exercise care not to damage the installed connectors. s when attaching the boards or other components with the screws make sure that any stresses will not cause board deflections affecting the mounting areas of the connector. s when hand soldering: ?do not perform hand soldering with the fpc inserted in the connector. * do not apply excessive heat or touch the soldering iron anywhere other than the connector leads. * do not use excessive amount of solder or flux compounds. operation of the actuator or contacts may be affected by excessive amounts of solder or flux compounds. connectors pcb fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 12 the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 05/2017. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? usa: hirose electric (u.s.a.), inc. san jose office 2841 junction ave, suite 200 san jose, ca. 95134 phone : +1-408-253-9640 fax : +1-408-253-9641 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. detroit office (automotive) 17197 n. laurel park drive, suite 253, livonia, mi 48152 phone : +1-734-542-9963 fax : +1-734-542-9964 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. boston office 300 brickstone square suite 201, andover, ma 01810 phone : +1-978-662-5255 usa: hirose electric (u.s.a.), inc. headquarters chicago office 2300 warrenville road, suite 150, downers grove, il 60515 phone : +1-630-282-6700 http://www.hirose.com/us/ china: hirose electric technologies (shenzhen) co., ltd. room 09-13, 19/f, office tower shun hing square, di wang commercial centre, 5002 shen nan dong road, shenzhen city, guangdong province, 518008 phone : +86-755-8207-0851 fax : +86-755-8207-0873 http://www.hirose.com/cn/ korea: hirose korea co.,ltd. 250, huimanggongwon-ro, siheung-si, gyeonggi-do, korea, 15083 phone : +82-31-496-7000 or 7124 fax : +82-31-496-7100 http://www.hirose.co.kr/ germany: hirose electric europe b.v. nuremberg office neumeyerstrasse 22-26, 90411 nurnberg phone : +49-911 32 68 89 63 fax : +49-911 32 68 89 69 http://www.hirose.com/eu/ germany: hirose electric europe b.v. hanover office bayernstr. 3, haus c 30855 langenhagen, germany phone : +49-511 97 82 61 30 fax : +49-511 97 82 61 35 http://www.hirose.com/eu/ germany: hirose electric europe b.v. german branch schoenbergstr. 20, 73760 ostfildern phone : +49-711-456002-1 fax : +49-711-456002-299 http://www.hirose.com/eu/ france: hirose electric europe b.v. paris office regus la garenne colombes,place de la belgique, 71 boulevard national la garenne colombes, 92250, france phone : +33 (0) 1 7082 3170 fax : +33 (1) 7082 3101 http://www.hirose.com/eu/ the netherlands: hirose electric europe b.v. hogehillweg #8 1101 cc amsterdam z-o phone : +31-20-6557460 fax : +31-20-6557469 http://www.hirose.com/eu/ united kingdom: hirose electric europe bv (uk branch) 4 newton court, kelvin drive, knowlhill, milton keynes, mk5 8nh phone : +44-1908 202050 fax : +44-1908 202058 http://www.hirose.com/eu/ china: hirose electric (shanghai) co., ltd. 18, enterprise center tower 2, 209# gong he road, jing?an district, shanghai, china 200070 phone : +86-21-6391-3355 fax : +86-21-6391-3335 http://www.hirose.com/cn/ china: hirose electric (shanghai) co.,ltd. beijing branch a1001, ocean international center, building 56# east 4th ring middle road, chaoyang district, beijing, 100025 phone : +86-10-5165-9332 fax : +86-10-5908-1381 http://www.hirose.com/cn/ taiwan: hirose electric taiwan co., ltd. 103 8f, no.87, zhengzhou rd., taipei phone : +886-2-2555-7377 fax : +886-2-2555-7350 http://www.hirose.com/tw/ hong kong: hirose electric hongkong trading co., ltd. room 1001, west wing, tsim sha tsui centre, 66 mody road, tsim sha tsui east, kowloon, hong kong phone : +852-2803-5338 fax : +852-2591-6560 http://www.hirose.com/hk/ india: hirose electric singapore pte. ltd. delhi liaison office office no.552, regus-green bo ulevard, level5, tower c, sec62, plot b-9a, block b, noida, 201301, uttar pradesh, india phone : +91-12-660-8018 fax : +91-120-4804949 http://www.hirose.com/sg/ singapore: hirose electric singapore pte. ltd. 10 anson road #26-16, international plaza 079903, singapore phone : +65-6324-6113 fax : + 65-6324-6123 http://www.hirose.com/sg/ india: hirose electric singapore pte. ltd. bangalore liaison office unit no-403, 4th floor, no-84, barton centre, mahatma gandhi (mg) road, bangalore 560 001, karnataka, india phone : +91-80-4120 1907 fax : +91-80-4120 9908 http://www.hirose.com/sg/ malaysia: penang representative office 1-21-01, suntech @ penang cybercity (1164), lintang mayang pasir 3,11950, bayan baru, penang, malaysia. phone : +604-619-2564 fax : +604-619-2574 http://www.hirose.com/sg/ thailand: bangkok office (representative office) unit 4703, 47th fl., 1 empire tower, south sathorn road, yannawa, sathorn, bangkok 10120 thailand phone : +66-2-686-1255 fax : +66-2-686-3433 http://www.hirose.com/sg/
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. 1 2017.5 ? 5pq#puupndpoubdujnqspwftuifeftjhoqfyjcjmjuz 5bqfstpobmmjoofsxbmmt product length : l=0.5(n-1)+2.5 *n : number of positions depth : 3.8mm height : 1.0mm ? fh34srj differential impedance yqtsjtfujnf ? ? top/bottom contact ? smooth fpc / ffc insertion 5(35%5; 5jnf ot
dpoofdups '1$ 4 4qfd features 1. low-profile with the 1.0mm above the board and width of 3.8mm the connectors are used in space saving applications. 2. increased fpc/ffc retention as compared with existing similar construction connectors : * in horizontal direction : approximately 2.6 times higher * in vertical direction : approximately 2 times higher 3. unique back-flip rotating actuator the rotating actuator opens from the back of the connector, assuring reliable electrical and mechanical connection. 4. easy fpc insertion and reliable electrical connection proven flip lock actuator allows easy insertion of fpc and provides a tactile sensation when fully closed, confirming complete electrical and mechanical connection. 5. delivered with the actuator open fpc/fpc can be immediately inserted without the need for the opening of the actuator. 6. accepts standard fpc thickness 0.3mm thick standard flexible printed circuit (fpc) can be used. this is the only ultra-low profile zif connector using standard fpc. 7. conductive traces on the pcb can run under the connector no exposed contacts on the bottom of the connector. 8.halogen-free * *as defined by iec61249-2-21 br-900ppm maximum, cl-900ppm maximum, cl + br combined-1,500ppm maximum 9. board placement with automatic equipment flat upper surface and tape and reel packaging facilitate vacuum pick-up and placement. standard reel packaging contains 5000 connectors. fig.1 fig.2 fig.3 fig.4 ? 3.8mm depth 0.5mm pitch, 1.0mm above the board top and top/bottom contact, back-flip actuator flexible printed circuit & flexible flat cable zif connectors fh34srj series in cases where the application will demand a high level of reliability, such as automotive, please contact a company representative for further information. fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 2 product specifications ratings current rating 0.5a (note 1) voltage rating 50vrms ac operating temperature range : -55 to +85? (note 2) operating humidity range : relative humidity 90% max. (no condensation) storage temperature range : -10 to +50? (note 3) storage humidity range : relative humidity 90% max. (no condensation) recommended fpc/ffc thickness : 0.3 ?0.03 mm, gold plated contact pads item specification conditions 1. insulation resistance 500m?min. 100v dc 2. withstanding voltage no flashover or insulation breakdown 250vrms ac / 1 minute 3. contact resistance 100m?max. * including fpc and ffc conductor resistance 1ma, ac / dc 20mv max (ac : 1khz) 4. durability contact resistance : 100m?max. no damage, cracks, or parts dislocation 20cycles 5. vibration no electrical discontinuity of 1? or longer contact resistance : 100m?max. no damage, cracks, or parts dislocation frequency : 10 to 55 hz, single amplitude of 0.75 mm, 10 cycles in each of the 3 axis 6. shock no electrical discontinuity of 1? or longer contact resistance : 100m?max. no damage, cracks, or parts dislocation acceleration of 981m/s 2 , 6 ms duration, sine half- wave, 3 cycles in each of the 3 axis 7. humidity (steady state) contact resistance : 100m?max. insulation resistance : 50m?min. no damage, cracks, or parts dislocation 96 hours at 40? and humidity of 90 to 95% 8. temperature cycle contact resistance : 100m?max. insulation resistance : 50m?min. no damage, cracks, or parts dislocation temperature : -55? / +15? to +35? / +85? / +15? to +35? time: 30 / 2 to 3 / 30 / 2 to 3 minutes 5 cycles 9. resistance to soldering heat no deformation of components affecting performance reflow : at the recommended temperature profile manual soldering: 350? ?0? for 5 seconds (note 3) note1 : when passing the current through all of the contacts, use 70% of the rated current. note2 : includes temperature rise caused by current flow. note3 : the term "storage" refers to products stored for a long period prior to mounting and use. the operating temperature and humidity range covers the non-conducting condition of installed connectors in storage, shipment or during transportation after board mounting. materials / finish part material finish remarks insulator lcp color : gray ul94v-0 pa color : black lcp(8pos.) contacts phosphor bronze gold plating with nickel barrier ??? metalfittings phosphor bronze pure tin reflow plating ??? product number structure refer to the chart below when determining the product specifications from the product number. please select from the product numbers listed in this catalog when placing orders. fh 34s rj ? 30s ? 0.5 sh ( 50 ) ^ _ ` a b c d ^ series name : fh b contact pitch : 0.5mm _ series no. : 34s c termination type sh : smt horizontal mounting type ` rj top and bottom contact, halogen-free (flame retardance ul94v-0). d specifications (50)? standard product 5,000 pcs/reel (99)? 500 pcs/reel a number of contacts : 4 to 50 fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 3 number of contacts contact no.1 polarization mark cav no. number of contacts indicator hrs mark lot no. connector dimensions unit : mm part no. hrs no. no. of contacts abcd fh34srj-4s-0.5sh(50) 580-1238-7 50 4 4 1.5 2.53 3.38 fh34srj-5s-0.5sh(50) 580-1264-7 50 5 4.5 2 3.03 3.88 fh34srj-6s-0.5sh(50) 580-1236-1 50 6 5 2.5 3.53 4.38 fh34srj-7s-0.5sh(50) 580-1200-0 50 7 5.5 3 4.03 4.88 fh34srj-8s-0.5sh(50) 580-1231-8 50 8 6 3.5 4.53 5.38 fh34srj-9s-0.5sh(50) 580-1262-1 50 9 6.5 4 5.03 5.88 fh34srj-10s-0.5sh(50) 580-1251-5 50 10 7 4.5 5.53 6.38 fh34srj-11s-0.5sh(50) 580-1258-4 50 11 7.5 5 6.03 6.88 fh34srj-12s-0.5sh(50) 580-1253-0 50 12 8 5.5 6.53 7.38 fh34srj-14s-0.5sh(50) 580-1252-8 50 14 9 6.5 7.53 8.38 fh34srj-16s-0.5sh(50) 580-1259-7 50 16 10 7.5 8.57 9.38 fh34srj-18s-0.5sh(50) 580-1248-0 50 18 11 8.5 9.57 10.38 fh34srj-20s-0.5sh(50) 580-1256-9 50 20 12 9.5 10.57 11.38 fh34srj-22s-0.5sh(50) 580-1254-3 50 22 13 10.5 11.57 12.38 fh34srj-24s-0.5sh(50) 580-1255-6 50 24 14 11.5 12.57 13.38 fh34srj-26s-0.5sh(50) 580-1247-8 50 26 15 12.5 13.57 14.38 fh34srj-30s-0.5sh(50) 580-1232-0 50 30 17 14.5 15.57 16.38 fh34srj-34s-0.5sh(50) 580-1261-9 50 34 19 16.5 17.53 18.38 fh34srj-40s-0.5sh(50) 580-1260-6 50 40 22 19.5 20.53 21.38 fh34srj-45s-0.5sh(50) 580-1265-0 50 45 24.5 22 23.03 23.88 fh34srj-50s-0.5sh(50) 580-1266-2 50 50 27 24.5 25.53 26.38 tape and reel packaging. order by number of reels.

note 1 : the coplanarity of each terminal lead within specified dimension is 0.1mm max. note 2 : packaged on tape and reel only. check packaging specification. note 3 : slight variations in color of the plastic compounds do not affect form, fit or function of the connector. note 4 : after reflow, the terminal plating may change color, however this does not represent a quality issue. fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 4 recommended pcb mounting pattern b x 0.30.05 0.065 nx x 0.1 contact no.1 connector image : underside 0.25 0.25 2.9 0.15 0.15 0.185 0.5 e0.1 0.80.05 0.80.05 3.30.05 f0.1 /? recommended fpc/ffc dimensions unit : mm part no. hrs no. no. of contacts befg fh34srj-4s-0.5sh(50) 580-1238-7 50 4 1.5 3.1 3.9 2.5 fh34srj-5s-0.5sh(50) 580-1264-7 50 5 2 3.6 4.4 3 fh34srj-6s-0.5sh(50) 580-1236-1 50 6 2.5 4.1 4.9 3.5 fh34srj-7s-0.5sh(50) 580-1200-0 50 7 3 4.6 5.4 4 fh34srj-8s-0.5sh(50) 580-1231-8 50 8 3.5 5.1 5.9 4.5 fh34srj-9s-0.5sh(50) 580-1262-1 50 9 4 5.6 6.4 5 fh34srj-10s-0.5sh(50) 580-1251-5 50 10 4.5 6.1 6.9 5.5 fh34srj-11s-0.5sh(50) 580-1258-4 50 11 5 6.6 7.4 6 fh34srj-12s-0.5sh(50) 580-1253-0 50 12 5.5 7.1 7.9 6.5 fh34srj-14s-0.5sh(50) 580-1252-8 50 14 6.5 8.1 8.9 7.5 fh34srj-16s-0.5sh(50) 580-1259-7 50 16 7.5 9.1 9.9 8.5 fh34srj-18s-0.5sh(50) 580-1248-0 50 18 8.5 10.1 10.9 9.5 fh34srj-20s-0.5sh(50) 580-1256-9 50 20 9.5 11.1 11.9 10.5 fh34srj-22s-0.5sh(50) 580-1254-3 50 22 10.5 12.1 12.9 11.5 fh34srj-24s-0.5sh(50) 580-1255-6 50 24 11.5 13.1 13.9 12.5 fh34srj-26s-0.5sh(50) 580-1247-8 50 26 12.5 14.1 14.9 13.5 fh34srj-30s-0.5sh(50) 580-1232-0 50 30 14.5 16.1 16.9 15.5 fh34srj-34s-0.5sh(50) 580-1261-9 50 34 16.5 18.1 18.9 17.5 fh34srj-40s-0.5sh(50) 580-1260-6 50 40 19.5 21.1 21.9 20.5 fh34srj-45s-0.5sh(50) 580-1265-0 50 45 22 23.6 24.4 23 fh34srj-50s-0.5sh(50) 580-1266-2 50 50 24.5 26.1 26.9 25.5 nx contact no.1(top contact) (uncovered area) b 0.50.07 g0.05 0.50.07 r0.20.1 0.5 0.30.03 0.30.03 0.03 z z contact no.1(bottom contact) 1.50.3 2.50.3 (stiffener) p nx pcb mounting pattern image 0.250.03 0.650.03 3.30.03 0.80.03 e0.03 f0.03 0.5 b y y 0.03 recommended stencil pattern (recommended stencil thickness : t=0.1mm) note 1 : dimension p shall be 0.5mm min. note 2 : the recommended fpc pattern above has been designed only for fh34srj series. when using the fpc for fh19sc series (lower contact), uncoverd area shall be 2.50.3mm and stiffener shall be 3.5mm min. /? recommended pcb mounting pattern and metal mask dimensions y fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 5 /? recommended fpc construction 1. using single-sided fpc fpc : flexible printed circuit fpc : flexible printed circuit material name material material thickness (m) 2. using double-sided fpc 1. this specification is a recommendation for the construction of the fh34srj series fpc and ffc (t=0.3 0.03). 2. for details about the construction, please contact the fpc/ffc manufacturers. * to prevent release of the fpc due to its bending, use of the double sided fpc with copper foil on the back side is not recommended. covering film layer cover adhesive polyimide 1 mil thick 25 25 material name material material thickness (m) 3. using ffc ffc : flexible flat cable * tolerance of 20m. material name material material thickness (m) ? contact fpc manufacturer for specific details. surface treatment 0.2m thick gold plated over 1 to 5m thick nickel underplating 3 copper foil base adhesive base film reinforcement material adhesive stiffener cu 1oz thermosetting adhesive polyimide 1 mil thick thermosetting adhesive polyimide 7 mil thick 35 25 25 35 175 total 298 polyester film adhesive thermoplastic polyester (12) (30) 35 30 12 30 188 295 gold plated annealed copper foil adhesive polyester adhesive stiffener polyester polyester polyester total (25) (25) covering layer film cover adhesive polyimide 1 mil thick surface treatment 0.2m thick gold plated over 1 to 5m thick nickel underplating 3 through-hole copper copper foil base adhesive base film base adhesive cu cu 1/2oz thermosetting adhesive polyimide 1 mil thick 15 18 18 25 18 copper foil cover adhesive covering film layer reinforcement material adhesive stiffener cu 1/2oz thermosetting adhesive polyimide 1 mil thick thermosetting adhesive polyimide 4 mil thick (18) 25 25 50 100 total 297 fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 6 400mm min(leader) 100mm min (empty) 1600mm min (trailer ~ empty) embossed carrier tape top cover tape direction of unreeling (l : inside) ?13 (m : outside) ?380 ?80 24mm max direction of unreeling 40.1 1.95 80.1 ?1.5 +0.1 0 1.750.1 j0.1 h0.3 2 0.3 32mm min 40.1 80.1 ?1.5 +0.1 0 1.7 +0.15 0 2 0.3 1.95 1.750.1 j0.1 k0.1 h0.3 direction of unreeling 1.5 +0.1 0 /? packaging specification ? reel dimensions ? embossed carrier tape dimensions (tape width 24mm max.) ? embossed carrier tape dimensions (tape width 32mm min.) unit : mm part no. hrs no. no. of contacts hjklm fh34srj-4s-0.5sh(50) 580-1238-7 50 4 16 7.5 ? 17.4 21.4 fh34srj-5s-0.5sh(50) 580-1264-7 50 5 ? fh34srj-6s-0.5sh(50) 580-1236-1 50 6 ? fh34srj-7s-0.5sh(50) 580-1200-0 50 7 ? fh34srj-8s-0.5sh(50) 580-1231-8 50 8 ? fh34srj-9s-0.5sh(50) 580-1262-1 50 9 ? fh34srj-10s-0.5sh(50) 580-1251-5 50 10 ? fh34srj-11s-0.5sh(50) 580-1258-4 50 11 ? fh34srj-12s-0.5sh(50) 580-1253-0 50 12 24 11.5 ? 25.4 29.4 fh34srj-14s-0.5sh(50) 580-1252-8 50 14 ? fh34srj-16s-0.5sh(50) 580-1259-7 50 16 ? fh34srj-18s-0.5sh(50) 580-1248-0 50 18 ? fh34srj-20s-0.5sh(50) 580-1256-9 50 20 ? fh34srj-22s-0.5sh(50) 580-1254-3 50 22 ? fh34srj-24s-0.5sh(50) 580-1255-6 50 24 ? fh34srj-26s-0.5sh(50) 580-1247-8 50 26 ? fh34srj-30s-0.5sh(50) 580-1232-0 50 30 32 14.2 28.4 33.4 37.4 fh34srj-34s-0.5sh(50) 580-1261-9 50 34 fh34srj-40s-0.5sh(50) 580-1260-6 50 40 44 20.2 40.4 45.4 49.4 fh34srj-45s-0.5sh(50) 580-1265-0 50 45 fh34srj-50s-0.5sh(50) 580-1266-2 50 50 fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 7 max 250? start temperature(?) time (seconds) 25? (60 sec.) (60 sec.) 90 to 120 sec. preheating soldering 0 50 100 150 150? 200? 230? 200 250 hrs test condition solder method : reflow, ir/hot air environment : room air solder composition : paste, 96.5%sn/3.0%ag/0.5%cu (senju metal industry, co., ltd.'s part number: m705-221cm5-42-10.5) test board : glass epoxy 18.3mm32.85mm0.8mm thick land dimensions : 0.3mm0.8mm metal mask : 0.250.650.1mm thick the temperature profiles shown are based on the above conditions. in individual applications the actual temperature may vary, depending on solder paste type, volume / thickness and board size / thickness. consult your solder paste and equipment manufacturer for specific recommendations. /? temperature profile fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 8 actuator open actuator close pcb pcb fpc fpc /? operation and precautions operation 1. as delivered 2. fpc/ffc insertion 3. fpc/ffc insertion (the top contact specification) delivered with the actuator open. there is no need to operate the actuator prior to inserting the fpc/ffc. | precautions ~ do not close the actuator without the fpc/fpc inserted. be sure that the fpc is parallel to the surface of the pcb, then completely insert into the connector. | caution ~ do not attempt to insert the fpc if actuator is closed. ~ if the actuator is closed and if the fpc is twisted during insertion, it can cause contact deformation and / or contact failure. proper insertion skewed insertion shallow insertion ^ insert the fpc/ffc with the conductive surfaces facing up. align the fpc/ffc straight with the connector and insert it firmly all the way. caution : handle connectors carefully, as they are very small and thin. please refer to this section for verification of the following points: ^ the actuator packaged in the open condition. the actuator packaged in the open condition. boundary of fpc pattern edge of housing opening boundary of fpc pattern edge of housing opening ^ exercise care when handling connectors. follow recommendations given below. fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 9 operation do not press down on the actuator or housing do not press down on the actuator or housing lift at the center lift at the center do not rotate the actuator by the ends do not rotate the actuator by the ends flip actuator up to open flip actuator up to open do not apply force to the actuator in the direction shown when it is fully open. opening to an angle greater than 90c will break or damage the connector. do not apply force to the actuator in the direction shown when it is fully open. opening to an angle greater than 90c will break or damage the connector. lift at the center lift at the center do not rotate the actuator by the ends do not rotate the actuator by the ends . locking . fpcffc remoal lock release ^ after fpc/ffc insertion, rotate the actuator down to a full stop, pushing it at the center. ^ carefully rotate the actuator up to 90? lifting it at the center. * this connector uses a back flip type structure. the insert direction of the fpc and the actuator are different from front flip type connectors. do not to try to open the actuator from the fpc side. /? operation and precautions rotate rotate fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 10 fpc fpc stiffener film pcb pcb stiffener film component part pcb operation 6. fpc routing ^ fpc should be routed in a manner that no strain or load is exerted onto the fpc. placing any strain on the fpc may result in unintentional disconnect or damage to the fpc, which can lead to issues such as contact failure. | caution ~ do not allow the fpc or stiffener to touch the casings, housings or any other items. ~ when routing the fpc, make sure that no strain or load is applied to the connector in a pulling, pushing or side-to-side motion. additionally, make sure that no excessive upward or downward force is applied to the connector. ~ when routing the fpc, make sure that there is a stress free path for the fpc and the stiffener is parallel to the pcb. observe correct bend radiuses. ~ do not place or mount any parts that will interfere with the fpc routing. /? operation and precautions e fpc routing . fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 11 /? operation and precautions precautions when mounting connectors on the pcb s handling before mounting on pcb y insertion of the fpc/ffc or operation of the actuator prior to mounting on the pcb is not recommended. s pc board warpage minimize the warpage as much as possible. the connecto r are straight within 0.1 mm max. make sure that the mounting area flatness can accept the connector terminals without caus ing any failure of the solder joints. s forces on the board s when braking the large pc board into individual boards exercise care not to damage the installed connectors. s when attaching the boards or other components with the screws make sure that any stresses will not cause board deflections affecting the mounting areas of the connector. s when hand soldering: ?do not perform hand soldering with the fpc inserted in the connector. * do not apply excessive heat or touch the soldering iron anywhere other than the connector leads. * do not use excessive amount of solder or flux compounds. operation of the actuator or contacts may be affected by excessive amounts of solder or flux compounds. connectors pcb fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 12 the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 05/2017. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? usa: hirose electric (u.s.a.), inc. san jose office 2841 junction ave, suite 200 san jose, ca. 95134 phone : +1-408-253-9640 fax : +1-408-253-9641 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. detroit office (automotive) 17197 n. laurel park drive, suite 253, livonia, mi 48152 phone : +1-734-542-9963 fax : +1-734-542-9964 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. boston office 300 brickstone square suite 201, andover, ma 01810 phone : +1-978-662-5255 usa: hirose electric (u.s.a.), inc. headquarters chicago office 2300 warrenville road, suite 150, downers grove, il 60515 phone : +1-630-282-6700 http://www.hirose.com/us/ china: hirose electric technologies (shenzhen) co., ltd. room 09-13, 19/f, office tower shun hing square, di wang commercial centre, 5002 shen nan dong road, shenzhen city, guangdong province, 518008 phone : +86-755-8207-0851 fax : +86-755-8207-0873 http://www.hirose.com/cn/ korea: hirose korea co.,ltd. 250, huimanggongwon-ro, siheung-si, gyeonggi-do, korea, 15083 phone : +82-31-496-7000 or 7124 fax : +82-31-496-7100 http://www.hirose.co.kr/ germany: hirose electric europe b.v. nuremberg office neumeyerstrasse 22-26, 90411 nurnberg phone : +49-911 32 68 89 63 fax : +49-911 32 68 89 69 http://www.hirose.com/eu/ germany: hirose electric europe b.v. hanover office bayernstr. 3, haus c 30855 langenhagen, germany phone : +49-511 97 82 61 30 fax : +49-511 97 82 61 35 http://www.hirose.com/eu/ germany: hirose electric europe b.v. german branch schoenbergstr. 20, 73760 ostfildern phone : +49-711-456002-1 fax : +49-711-456002-299 http://www.hirose.com/eu/ france: hirose electric europe b.v. paris office regus la garenne colombes,place de la belgique, 71 boulevard national la garenne colombes, 92250, france phone : +33 (0) 1 7082 3170 fax : +33 (1) 7082 3101 http://www.hirose.com/eu/ the netherlands: hirose electric europe b.v. hogehillweg #8 1101 cc amsterdam z-o phone : +31-20-6557460 fax : +31-20-6557469 http://www.hirose.com/eu/ united kingdom: hirose electric europe bv (uk branch) 4 newton court, kelvin drive, knowlhill, milton keynes, mk5 8nh phone : +44-1908 202050 fax : +44-1908 202058 http://www.hirose.com/eu/ china: hirose electric (shanghai) co., ltd. 18, enterprise center tower 2, 209# gong he road, jing?an district, shanghai, china 200070 phone : +86-21-6391-3355 fax : +86-21-6391-3335 http://www.hirose.com/cn/ china: hirose electric (shanghai) co.,ltd. beijing branch a1001, ocean international center, building 56# east 4th ring middle road, chaoyang district, beijing, 100025 phone : +86-10-5165-9332 fax : +86-10-5908-1381 http://www.hirose.com/cn/ taiwan: hirose electric taiwan co., ltd. 103 8f, no.87, zhengzhou rd., taipei phone : +886-2-2555-7377 fax : +886-2-2555-7350 http://www.hirose.com/tw/ hong kong: hirose electric hongkong trading co., ltd. room 1001, west wing, tsim sha tsui centre, 66 mody road, tsim sha tsui east, kowloon, hong kong phone : +852-2803-5338 fax : +852-2591-6560 http://www.hirose.com/hk/ india: hirose electric singapore pte. ltd. delhi liaison office office no.552, regus-green bo ulevard, level5, tower c, sec62, plot b-9a, block b, noida, 201301, uttar pradesh, india phone : +91-12-660-8018 fax : +91-120-4804949 http://www.hirose.com/sg/ singapore: hirose electric singapore pte. ltd. 10 anson road #26-16, international plaza 079903, singapore phone : +65-6324-6113 fax : + 65-6324-6123 http://www.hirose.com/sg/ india: hirose electric singapore pte. ltd. bangalore liaison office unit no-403, 4th floor, no-84, barton centre, mahatma gandhi (mg) road, bangalore 560 001, karnataka, india phone : +91-80-4120 1907 fax : +91-80-4120 9908 http://www.hirose.com/sg/ malaysia: penang representative office 1-21-01, suntech @ penang cybercity (1164), lintang mayang pasir 3,11950, bayan baru, penang, malaysia. phone : +604-619-2564 fax : +604-619-2574 http://www.hirose.com/sg/ thailand: bangkok office (representative office) unit 4703, 47th fl., 1 empire tower, south sathorn road, yannawa, sathorn, bangkok 10120 thailand phone : +66-2-686-1255 fax : +66-2-686-3433 http://www.hirose.com/sg/
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. 1 2017.5 ? 5pq#puupndpoubdujnqspwftuifeftjhoqfyjcjmjuz 5bqfstpobmmjoofsxbmmt product length : l=0.5(n-1)+2.5 *n : number of positions depth : 3.8mm height : 1.0mm ? fh34srj differential impedance yqtsjtfujnf ? ? top/bottom contact ? smooth fpc / ffc insertion 5(35%5; 5jnf ot
dpoofdups '1$ 4 4qfd features 1. low-profile with the 1.0mm above the board and width of 3.8mm the connectors are used in space saving applications. 2. increased fpc/ffc retention as compared with existing similar construction connectors : * in horizontal direction : approximately 2.6 times higher * in vertical direction : approximately 2 times higher 3. unique back-flip rotating actuator the rotating actuator opens from the back of the connector, assuring reliable electrical and mechanical connection. 4. easy fpc insertion and reliable electrical connection proven flip lock actuator allows easy insertion of fpc and provides a tactile sensation when fully closed, confirming complete electrical and mechanical connection. 5. delivered with the actuator open fpc/fpc can be immediately inserted without the need for the opening of the actuator. 6. accepts standard fpc thickness 0.3mm thick standard flexible printed circuit (fpc) can be used. this is the only ultra-low profile zif connector using standard fpc. 7. conductive traces on the pcb can run under the connector no exposed contacts on the bottom of the connector. 8.halogen-free * *as defined by iec61249-2-21 br-900ppm maximum, cl-900ppm maximum, cl + br combined-1,500ppm maximum 9. board placement with automatic equipment flat upper surface and tape and reel packaging facilitate vacuum pick-up and placement. standard reel packaging contains 5000 connectors. fig.1 fig.2 fig.3 fig.4 ? 3.8mm depth 0.5mm pitch, 1.0mm above the board top and top/bottom contact, back-flip actuator flexible printed circuit & flexible flat cable zif connectors fh34srj series in cases where the application will demand a high level of reliability, such as automotive, please contact a company representative for further information. fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 2 product specifications ratings current rating 0.5a (note 1) voltage rating 50vrms ac operating temperature range : -55 to +85? (note 2) operating humidity range : relative humidity 90% max. (no condensation) storage temperature range : -10 to +50? (note 3) storage humidity range : relative humidity 90% max. (no condensation) recommended fpc/ffc thickness : 0.3 ?0.03 mm, gold plated contact pads item specification conditions 1. insulation resistance 500m?min. 100v dc 2. withstanding voltage no flashover or insulation breakdown 250vrms ac / 1 minute 3. contact resistance 100m?max. * including fpc and ffc conductor resistance 1ma, ac / dc 20mv max (ac : 1khz) 4. durability contact resistance : 100m?max. no damage, cracks, or parts dislocation 20cycles 5. vibration no electrical discontinuity of 1? or longer contact resistance : 100m?max. no damage, cracks, or parts dislocation frequency : 10 to 55 hz, single amplitude of 0.75 mm, 10 cycles in each of the 3 axis 6. shock no electrical discontinuity of 1? or longer contact resistance : 100m?max. no damage, cracks, or parts dislocation acceleration of 981m/s 2 , 6 ms duration, sine half- wave, 3 cycles in each of the 3 axis 7. humidity (steady state) contact resistance : 100m?max. insulation resistance : 50m?min. no damage, cracks, or parts dislocation 96 hours at 40? and humidity of 90 to 95% 8. temperature cycle contact resistance : 100m?max. insulation resistance : 50m?min. no damage, cracks, or parts dislocation temperature : -55? / +15? to +35? / +85? / +15? to +35? time: 30 / 2 to 3 / 30 / 2 to 3 minutes 5 cycles 9. resistance to soldering heat no deformation of components affecting performance reflow : at the recommended temperature profile manual soldering: 350? ?0? for 5 seconds (note 3) note1 : when passing the current through all of the contacts, use 70% of the rated current. note2 : includes temperature rise caused by current flow. note3 : the term "storage" refers to products stored for a long period prior to mounting and use. the operating temperature and humidity range covers the non-conducting condition of installed connectors in storage, shipment or during transportation after board mounting. materials / finish part material finish remarks insulator lcp color : gray ul94v-0 pa color : black lcp(8pos.) contacts phosphor bronze gold plating with nickel barrier ??? metalfittings phosphor bronze pure tin reflow plating ??? product number structure refer to the chart below when determining the product specifications from the product number. please select from the product numbers listed in this catalog when placing orders. fh 34s rj ? 30s ? 0.5 sh ( 50 ) ^ _ ` a b c d ^ series name : fh b contact pitch : 0.5mm _ series no. : 34s c termination type sh : smt horizontal mounting type ` rj top and bottom contact, halogen-free (flame retardance ul94v-0). d specifications (50)? standard product 5,000 pcs/reel (99)? 500 pcs/reel a number of contacts : 4 to 50 fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 3 number of contacts contact no.1 polarization mark cav no. number of contacts indicator hrs mark lot no. connector dimensions unit : mm part no. hrs no. no. of contacts abcd fh34srj-4s-0.5sh(50) 580-1238-7 50 4 4 1.5 2.53 3.38 fh34srj-5s-0.5sh(50) 580-1264-7 50 5 4.5 2 3.03 3.88 fh34srj-6s-0.5sh(50) 580-1236-1 50 6 5 2.5 3.53 4.38 fh34srj-7s-0.5sh(50) 580-1200-0 50 7 5.5 3 4.03 4.88 fh34srj-8s-0.5sh(50) 580-1231-8 50 8 6 3.5 4.53 5.38 fh34srj-9s-0.5sh(50) 580-1262-1 50 9 6.5 4 5.03 5.88 fh34srj-10s-0.5sh(50) 580-1251-5 50 10 7 4.5 5.53 6.38 fh34srj-11s-0.5sh(50) 580-1258-4 50 11 7.5 5 6.03 6.88 fh34srj-12s-0.5sh(50) 580-1253-0 50 12 8 5.5 6.53 7.38 fh34srj-14s-0.5sh(50) 580-1252-8 50 14 9 6.5 7.53 8.38 fh34srj-16s-0.5sh(50) 580-1259-7 50 16 10 7.5 8.57 9.38 fh34srj-18s-0.5sh(50) 580-1248-0 50 18 11 8.5 9.57 10.38 fh34srj-20s-0.5sh(50) 580-1256-9 50 20 12 9.5 10.57 11.38 fh34srj-22s-0.5sh(50) 580-1254-3 50 22 13 10.5 11.57 12.38 fh34srj-24s-0.5sh(50) 580-1255-6 50 24 14 11.5 12.57 13.38 fh34srj-26s-0.5sh(50) 580-1247-8 50 26 15 12.5 13.57 14.38 fh34srj-30s-0.5sh(50) 580-1232-0 50 30 17 14.5 15.57 16.38 fh34srj-34s-0.5sh(50) 580-1261-9 50 34 19 16.5 17.53 18.38 fh34srj-40s-0.5sh(50) 580-1260-6 50 40 22 19.5 20.53 21.38 fh34srj-45s-0.5sh(50) 580-1265-0 50 45 24.5 22 23.03 23.88 fh34srj-50s-0.5sh(50) 580-1266-2 50 50 27 24.5 25.53 26.38 tape and reel packaging. order by number of reels.

note 1 : the coplanarity of each terminal lead within specified dimension is 0.1mm max. note 2 : packaged on tape and reel only. check packaging specification. note 3 : slight variations in color of the plastic compounds do not affect form, fit or function of the connector. note 4 : after reflow, the terminal plating may change color, however this does not represent a quality issue. fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 4 recommended pcb mounting pattern b x 0.30.05 0.065 nx x 0.1 contact no.1 connector image : underside 0.25 0.25 2.9 0.15 0.15 0.185 0.5 e0.1 0.80.05 0.80.05 3.30.05 f0.1 /? recommended fpc/ffc dimensions unit : mm part no. hrs no. no. of contacts befg fh34srj-4s-0.5sh(50) 580-1238-7 50 4 1.5 3.1 3.9 2.5 fh34srj-5s-0.5sh(50) 580-1264-7 50 5 2 3.6 4.4 3 fh34srj-6s-0.5sh(50) 580-1236-1 50 6 2.5 4.1 4.9 3.5 fh34srj-7s-0.5sh(50) 580-1200-0 50 7 3 4.6 5.4 4 fh34srj-8s-0.5sh(50) 580-1231-8 50 8 3.5 5.1 5.9 4.5 fh34srj-9s-0.5sh(50) 580-1262-1 50 9 4 5.6 6.4 5 fh34srj-10s-0.5sh(50) 580-1251-5 50 10 4.5 6.1 6.9 5.5 fh34srj-11s-0.5sh(50) 580-1258-4 50 11 5 6.6 7.4 6 fh34srj-12s-0.5sh(50) 580-1253-0 50 12 5.5 7.1 7.9 6.5 fh34srj-14s-0.5sh(50) 580-1252-8 50 14 6.5 8.1 8.9 7.5 fh34srj-16s-0.5sh(50) 580-1259-7 50 16 7.5 9.1 9.9 8.5 fh34srj-18s-0.5sh(50) 580-1248-0 50 18 8.5 10.1 10.9 9.5 fh34srj-20s-0.5sh(50) 580-1256-9 50 20 9.5 11.1 11.9 10.5 fh34srj-22s-0.5sh(50) 580-1254-3 50 22 10.5 12.1 12.9 11.5 fh34srj-24s-0.5sh(50) 580-1255-6 50 24 11.5 13.1 13.9 12.5 fh34srj-26s-0.5sh(50) 580-1247-8 50 26 12.5 14.1 14.9 13.5 fh34srj-30s-0.5sh(50) 580-1232-0 50 30 14.5 16.1 16.9 15.5 fh34srj-34s-0.5sh(50) 580-1261-9 50 34 16.5 18.1 18.9 17.5 fh34srj-40s-0.5sh(50) 580-1260-6 50 40 19.5 21.1 21.9 20.5 fh34srj-45s-0.5sh(50) 580-1265-0 50 45 22 23.6 24.4 23 fh34srj-50s-0.5sh(50) 580-1266-2 50 50 24.5 26.1 26.9 25.5 nx contact no.1(top contact) (uncovered area) b 0.50.07 g0.05 0.50.07 r0.20.1 0.5 0.30.03 0.30.03 0.03 z z contact no.1(bottom contact) 1.50.3 2.50.3 (stiffener) p nx pcb mounting pattern image 0.250.03 0.650.03 3.30.03 0.80.03 e0.03 f0.03 0.5 b y y 0.03 recommended stencil pattern (recommended stencil thickness : t=0.1mm) note 1 : dimension p shall be 0.5mm min. note 2 : the recommended fpc pattern above has been designed only for fh34srj series. when using the fpc for fh19sc series (lower contact), uncoverd area shall be 2.50.3mm and stiffener shall be 3.5mm min. /? recommended pcb mounting pattern and metal mask dimensions y fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 5 /? recommended fpc construction 1. using single-sided fpc fpc : flexible printed circuit fpc : flexible printed circuit material name material material thickness (m) 2. using double-sided fpc 1. this specification is a recommendation for the construction of the fh34srj series fpc and ffc (t=0.3 0.03). 2. for details about the construction, please contact the fpc/ffc manufacturers. * to prevent release of the fpc due to its bending, use of the double sided fpc with copper foil on the back side is not recommended. covering film layer cover adhesive polyimide 1 mil thick 25 25 material name material material thickness (m) 3. using ffc ffc : flexible flat cable * tolerance of 20m. material name material material thickness (m) ? contact fpc manufacturer for specific details. surface treatment 0.2m thick gold plated over 1 to 5m thick nickel underplating 3 copper foil base adhesive base film reinforcement material adhesive stiffener cu 1oz thermosetting adhesive polyimide 1 mil thick thermosetting adhesive polyimide 7 mil thick 35 25 25 35 175 total 298 polyester film adhesive thermoplastic polyester (12) (30) 35 30 12 30 188 295 gold plated annealed copper foil adhesive polyester adhesive stiffener polyester polyester polyester total (25) (25) covering layer film cover adhesive polyimide 1 mil thick surface treatment 0.2m thick gold plated over 1 to 5m thick nickel underplating 3 through-hole copper copper foil base adhesive base film base adhesive cu cu 1/2oz thermosetting adhesive polyimide 1 mil thick 15 18 18 25 18 copper foil cover adhesive covering film layer reinforcement material adhesive stiffener cu 1/2oz thermosetting adhesive polyimide 1 mil thick thermosetting adhesive polyimide 4 mil thick (18) 25 25 50 100 total 297 fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 6 400mm min(leader) 100mm min (empty) 1600mm min (trailer ~ empty) embossed carrier tape top cover tape direction of unreeling (l : inside) ?13 (m : outside) ?380 ?80 24mm max direction of unreeling 40.1 1.95 80.1 ?1.5 +0.1 0 1.750.1 j0.1 h0.3 2 0.3 32mm min 40.1 80.1 ?1.5 +0.1 0 1.7 +0.15 0 2 0.3 1.95 1.750.1 j0.1 k0.1 h0.3 direction of unreeling 1.5 +0.1 0 /? packaging specification ? reel dimensions ? embossed carrier tape dimensions (tape width 24mm max.) ? embossed carrier tape dimensions (tape width 32mm min.) unit : mm part no. hrs no. no. of contacts hjklm fh34srj-4s-0.5sh(50) 580-1238-7 50 4 16 7.5 ? 17.4 21.4 fh34srj-5s-0.5sh(50) 580-1264-7 50 5 ? fh34srj-6s-0.5sh(50) 580-1236-1 50 6 ? fh34srj-7s-0.5sh(50) 580-1200-0 50 7 ? fh34srj-8s-0.5sh(50) 580-1231-8 50 8 ? fh34srj-9s-0.5sh(50) 580-1262-1 50 9 ? fh34srj-10s-0.5sh(50) 580-1251-5 50 10 ? fh34srj-11s-0.5sh(50) 580-1258-4 50 11 ? fh34srj-12s-0.5sh(50) 580-1253-0 50 12 24 11.5 ? 25.4 29.4 fh34srj-14s-0.5sh(50) 580-1252-8 50 14 ? fh34srj-16s-0.5sh(50) 580-1259-7 50 16 ? fh34srj-18s-0.5sh(50) 580-1248-0 50 18 ? fh34srj-20s-0.5sh(50) 580-1256-9 50 20 ? fh34srj-22s-0.5sh(50) 580-1254-3 50 22 ? fh34srj-24s-0.5sh(50) 580-1255-6 50 24 ? fh34srj-26s-0.5sh(50) 580-1247-8 50 26 ? fh34srj-30s-0.5sh(50) 580-1232-0 50 30 32 14.2 28.4 33.4 37.4 fh34srj-34s-0.5sh(50) 580-1261-9 50 34 fh34srj-40s-0.5sh(50) 580-1260-6 50 40 44 20.2 40.4 45.4 49.4 fh34srj-45s-0.5sh(50) 580-1265-0 50 45 fh34srj-50s-0.5sh(50) 580-1266-2 50 50 fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 7 max 250? start temperature(?) time (seconds) 25? (60 sec.) (60 sec.) 90 to 120 sec. preheating soldering 0 50 100 150 150? 200? 230? 200 250 hrs test condition solder method : reflow, ir/hot air environment : room air solder composition : paste, 96.5%sn/3.0%ag/0.5%cu (senju metal industry, co., ltd.'s part number: m705-221cm5-42-10.5) test board : glass epoxy 18.3mm32.85mm0.8mm thick land dimensions : 0.3mm0.8mm metal mask : 0.250.650.1mm thick the temperature profiles shown are based on the above conditions. in individual applications the actual temperature may vary, depending on solder paste type, volume / thickness and board size / thickness. consult your solder paste and equipment manufacturer for specific recommendations. /? temperature profile fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 8 actuator open actuator close pcb pcb fpc fpc /? operation and precautions operation 1. as delivered 2. fpc/ffc insertion 3. fpc/ffc insertion (the top contact specification) delivered with the actuator open. there is no need to operate the actuator prior to inserting the fpc/ffc. | precautions ~ do not close the actuator without the fpc/fpc inserted. be sure that the fpc is parallel to the surface of the pcb, then completely insert into the connector. | caution ~ do not attempt to insert the fpc if actuator is closed. ~ if the actuator is closed and if the fpc is twisted during insertion, it can cause contact deformation and / or contact failure. proper insertion skewed insertion shallow insertion ^ insert the fpc/ffc with the conductive surfaces facing up. align the fpc/ffc straight with the connector and insert it firmly all the way. caution : handle connectors carefully, as they are very small and thin. please refer to this section for verification of the following points: ^ the actuator packaged in the open condition. the actuator packaged in the open condition. boundary of fpc pattern edge of housing opening boundary of fpc pattern edge of housing opening ^ exercise care when handling connectors. follow recommendations given below. fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 9 operation do not press down on the actuator or housing do not press down on the actuator or housing lift at the center lift at the center do not rotate the actuator by the ends do not rotate the actuator by the ends flip actuator up to open flip actuator up to open do not apply force to the actuator in the direction shown when it is fully open. opening to an angle greater than 90c will break or damage the connector. do not apply force to the actuator in the direction shown when it is fully open. opening to an angle greater than 90c will break or damage the connector. lift at the center lift at the center do not rotate the actuator by the ends do not rotate the actuator by the ends . locking . fpcffc remoal lock release ^ after fpc/ffc insertion, rotate the actuator down to a full stop, pushing it at the center. ^ carefully rotate the actuator up to 90? lifting it at the center. * this connector uses a back flip type structure. the insert direction of the fpc and the actuator are different from front flip type connectors. do not to try to open the actuator from the fpc side. /? operation and precautions rotate rotate fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 10 fpc fpc stiffener film pcb pcb stiffener film component part pcb operation 6. fpc routing ^ fpc should be routed in a manner that no strain or load is exerted onto the fpc. placing any strain on the fpc may result in unintentional disconnect or damage to the fpc, which can lead to issues such as contact failure. | caution ~ do not allow the fpc or stiffener to touch the casings, housings or any other items. ~ when routing the fpc, make sure that no strain or load is applied to the connector in a pulling, pushing or side-to-side motion. additionally, make sure that no excessive upward or downward force is applied to the connector. ~ when routing the fpc, make sure that there is a stress free path for the fpc and the stiffener is parallel to the pcb. observe correct bend radiuses. ~ do not place or mount any parts that will interfere with the fpc routing. /? operation and precautions e fpc routing . fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 11 /? operation and precautions precautions when mounting connectors on the pcb s handling before mounting on pcb y insertion of the fpc/ffc or operation of the actuator prior to mounting on the pcb is not recommended. s pc board warpage minimize the warpage as much as possible. the connecto r are straight within 0.1 mm max. make sure that the mounting area flatness can accept the connector terminals without caus ing any failure of the solder joints. s forces on the board s when braking the large pc board into individual boards exercise care not to damage the installed connectors. s when attaching the boards or other components with the screws make sure that any stresses will not cause board deflections affecting the mounting areas of the connector. s when hand soldering: ?do not perform hand soldering with the fpc inserted in the connector. * do not apply excessive heat or touch the soldering iron anywhere other than the connector leads. * do not use excessive amount of solder or flux compounds. operation of the actuator or contacts may be affected by excessive amounts of solder or flux compounds. connectors pcb fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 12 the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 05/2017. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? usa: hirose electric (u.s.a.), inc. san jose office 2841 junction ave, suite 200 san jose, ca. 95134 phone : +1-408-253-9640 fax : +1-408-253-9641 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. detroit office (automotive) 17197 n. laurel park drive, suite 253, livonia, mi 48152 phone : +1-734-542-9963 fax : +1-734-542-9964 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. boston office 300 brickstone square suite 201, andover, ma 01810 phone : +1-978-662-5255 usa: hirose electric (u.s.a.), inc. headquarters chicago office 2300 warrenville road, suite 150, downers grove, il 60515 phone : +1-630-282-6700 http://www.hirose.com/us/ china: hirose electric technologies (shenzhen) co., ltd. room 09-13, 19/f, office tower shun hing square, di wang commercial centre, 5002 shen nan dong road, shenzhen city, guangdong province, 518008 phone : +86-755-8207-0851 fax : +86-755-8207-0873 http://www.hirose.com/cn/ korea: hirose korea co.,ltd. 250, huimanggongwon-ro, siheung-si, gyeonggi-do, korea, 15083 phone : +82-31-496-7000 or 7124 fax : +82-31-496-7100 http://www.hirose.co.kr/ germany: hirose electric europe b.v. nuremberg office neumeyerstrasse 22-26, 90411 nurnberg phone : +49-911 32 68 89 63 fax : +49-911 32 68 89 69 http://www.hirose.com/eu/ germany: hirose electric europe b.v. hanover office bayernstr. 3, haus c 30855 langenhagen, germany phone : +49-511 97 82 61 30 fax : +49-511 97 82 61 35 http://www.hirose.com/eu/ germany: hirose electric europe b.v. german branch schoenbergstr. 20, 73760 ostfildern phone : +49-711-456002-1 fax : +49-711-456002-299 http://www.hirose.com/eu/ france: hirose electric europe b.v. paris office regus la garenne colombes,place de la belgique, 71 boulevard national la garenne colombes, 92250, france phone : +33 (0) 1 7082 3170 fax : +33 (1) 7082 3101 http://www.hirose.com/eu/ the netherlands: hirose electric europe b.v. hogehillweg #8 1101 cc amsterdam z-o phone : +31-20-6557460 fax : +31-20-6557469 http://www.hirose.com/eu/ united kingdom: hirose electric europe bv (uk branch) 4 newton court, kelvin drive, knowlhill, milton keynes, mk5 8nh phone : +44-1908 202050 fax : +44-1908 202058 http://www.hirose.com/eu/ china: hirose electric (shanghai) co., ltd. 18, enterprise center tower 2, 209# gong he road, jing?an district, shanghai, china 200070 phone : +86-21-6391-3355 fax : +86-21-6391-3335 http://www.hirose.com/cn/ china: hirose electric (shanghai) co.,ltd. beijing branch a1001, ocean international center, building 56# east 4th ring middle road, chaoyang district, beijing, 100025 phone : +86-10-5165-9332 fax : +86-10-5908-1381 http://www.hirose.com/cn/ taiwan: hirose electric taiwan co., ltd. 103 8f, no.87, zhengzhou rd., taipei phone : +886-2-2555-7377 fax : +886-2-2555-7350 http://www.hirose.com/tw/ hong kong: hirose electric hongkong trading co., ltd. room 1001, west wing, tsim sha tsui centre, 66 mody road, tsim sha tsui east, kowloon, hong kong phone : +852-2803-5338 fax : +852-2591-6560 http://www.hirose.com/hk/ india: hirose electric singapore pte. ltd. delhi liaison office office no.552, regus-green bo ulevard, level5, tower c, sec62, plot b-9a, block b, noida, 201301, uttar pradesh, india phone : +91-12-660-8018 fax : +91-120-4804949 http://www.hirose.com/sg/ singapore: hirose electric singapore pte. ltd. 10 anson road #26-16, international plaza 079903, singapore phone : +65-6324-6113 fax : + 65-6324-6123 http://www.hirose.com/sg/ india: hirose electric singapore pte. ltd. bangalore liaison office unit no-403, 4th floor, no-84, barton centre, mahatma gandhi (mg) road, bangalore 560 001, karnataka, india phone : +91-80-4120 1907 fax : +91-80-4120 9908 http://www.hirose.com/sg/ malaysia: penang representative office 1-21-01, suntech @ penang cybercity (1164), lintang mayang pasir 3,11950, bayan baru, penang, malaysia. phone : +604-619-2564 fax : +604-619-2574 http://www.hirose.com/sg/ thailand: bangkok office (representative office) unit 4703, 47th fl., 1 empire tower, south sathorn road, yannawa, sathorn, bangkok 10120 thailand phone : +66-2-686-1255 fax : +66-2-686-3433 http://www.hirose.com/sg/
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. 1 2017.5 ? 5pq#puupndpoubdujnqspwftuifeftjhoqfyjcjmjuz 5bqfstpobmmjoofsxbmmt product length : l=0.5(n-1)+2.5 *n : number of positions depth : 3.8mm height : 1.0mm ? fh34srj differential impedance yqtsjtfujnf ? ? top/bottom contact ? smooth fpc / ffc insertion 5(35%5; 5jnf ot
dpoofdups '1$ 4 4qfd features 1. low-profile with the 1.0mm above the board and width of 3.8mm the connectors are used in space saving applications. 2. increased fpc/ffc retention as compared with existing similar construction connectors : * in horizontal direction : approximately 2.6 times higher * in vertical direction : approximately 2 times higher 3. unique back-flip rotating actuator the rotating actuator opens from the back of the connector, assuring reliable electrical and mechanical connection. 4. easy fpc insertion and reliable electrical connection proven flip lock actuator allows easy insertion of fpc and provides a tactile sensation when fully closed, confirming complete electrical and mechanical connection. 5. delivered with the actuator open fpc/fpc can be immediately inserted without the need for the opening of the actuator. 6. accepts standard fpc thickness 0.3mm thick standard flexible printed circuit (fpc) can be used. this is the only ultra-low profile zif connector using standard fpc. 7. conductive traces on the pcb can run under the connector no exposed contacts on the bottom of the connector. 8.halogen-free * *as defined by iec61249-2-21 br-900ppm maximum, cl-900ppm maximum, cl + br combined-1,500ppm maximum 9. board placement with automatic equipment flat upper surface and tape and reel packaging facilitate vacuum pick-up and placement. standard reel packaging contains 5000 connectors. fig.1 fig.2 fig.3 fig.4 ? 3.8mm depth 0.5mm pitch, 1.0mm above the board top and top/bottom contact, back-flip actuator flexible printed circuit & flexible flat cable zif connectors fh34srj series in cases where the application will demand a high level of reliability, such as automotive, please contact a company representative for further information. fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 2 product specifications ratings current rating 0.5a (note 1) voltage rating 50vrms ac operating temperature range : -55 to +85? (note 2) operating humidity range : relative humidity 90% max. (no condensation) storage temperature range : -10 to +50? (note 3) storage humidity range : relative humidity 90% max. (no condensation) recommended fpc/ffc thickness : 0.3 ?0.03 mm, gold plated contact pads item specification conditions 1. insulation resistance 500m?min. 100v dc 2. withstanding voltage no flashover or insulation breakdown 250vrms ac / 1 minute 3. contact resistance 100m?max. * including fpc and ffc conductor resistance 1ma, ac / dc 20mv max (ac : 1khz) 4. durability contact resistance : 100m?max. no damage, cracks, or parts dislocation 20cycles 5. vibration no electrical discontinuity of 1? or longer contact resistance : 100m?max. no damage, cracks, or parts dislocation frequency : 10 to 55 hz, single amplitude of 0.75 mm, 10 cycles in each of the 3 axis 6. shock no electrical discontinuity of 1? or longer contact resistance : 100m?max. no damage, cracks, or parts dislocation acceleration of 981m/s 2 , 6 ms duration, sine half- wave, 3 cycles in each of the 3 axis 7. humidity (steady state) contact resistance : 100m?max. insulation resistance : 50m?min. no damage, cracks, or parts dislocation 96 hours at 40? and humidity of 90 to 95% 8. temperature cycle contact resistance : 100m?max. insulation resistance : 50m?min. no damage, cracks, or parts dislocation temperature : -55? / +15? to +35? / +85? / +15? to +35? time: 30 / 2 to 3 / 30 / 2 to 3 minutes 5 cycles 9. resistance to soldering heat no deformation of components affecting performance reflow : at the recommended temperature profile manual soldering: 350? ?0? for 5 seconds (note 3) note1 : when passing the current through all of the contacts, use 70% of the rated current. note2 : includes temperature rise caused by current flow. note3 : the term "storage" refers to products stored for a long period prior to mounting and use. the operating temperature and humidity range covers the non-conducting condition of installed connectors in storage, shipment or during transportation after board mounting. materials / finish part material finish remarks insulator lcp color : gray ul94v-0 pa color : black lcp(8pos.) contacts phosphor bronze gold plating with nickel barrier ??? metalfittings phosphor bronze pure tin reflow plating ??? product number structure refer to the chart below when determining the product specifications from the product number. please select from the product numbers listed in this catalog when placing orders. fh 34s rj ? 30s ? 0.5 sh ( 50 ) ^ _ ` a b c d ^ series name : fh b contact pitch : 0.5mm _ series no. : 34s c termination type sh : smt horizontal mounting type ` rj top and bottom contact, halogen-free (flame retardance ul94v-0). d specifications (50)? standard product 5,000 pcs/reel (99)? 500 pcs/reel a number of contacts : 4 to 50 fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 3 number of contacts contact no.1 polarization mark cav no. number of contacts indicator hrs mark lot no. connector dimensions unit : mm part no. hrs no. no. of contacts abcd fh34srj-4s-0.5sh(50) 580-1238-7 50 4 4 1.5 2.53 3.38 fh34srj-5s-0.5sh(50) 580-1264-7 50 5 4.5 2 3.03 3.88 fh34srj-6s-0.5sh(50) 580-1236-1 50 6 5 2.5 3.53 4.38 fh34srj-7s-0.5sh(50) 580-1200-0 50 7 5.5 3 4.03 4.88 fh34srj-8s-0.5sh(50) 580-1231-8 50 8 6 3.5 4.53 5.38 fh34srj-9s-0.5sh(50) 580-1262-1 50 9 6.5 4 5.03 5.88 fh34srj-10s-0.5sh(50) 580-1251-5 50 10 7 4.5 5.53 6.38 fh34srj-11s-0.5sh(50) 580-1258-4 50 11 7.5 5 6.03 6.88 fh34srj-12s-0.5sh(50) 580-1253-0 50 12 8 5.5 6.53 7.38 fh34srj-14s-0.5sh(50) 580-1252-8 50 14 9 6.5 7.53 8.38 fh34srj-16s-0.5sh(50) 580-1259-7 50 16 10 7.5 8.57 9.38 fh34srj-18s-0.5sh(50) 580-1248-0 50 18 11 8.5 9.57 10.38 fh34srj-20s-0.5sh(50) 580-1256-9 50 20 12 9.5 10.57 11.38 fh34srj-22s-0.5sh(50) 580-1254-3 50 22 13 10.5 11.57 12.38 fh34srj-24s-0.5sh(50) 580-1255-6 50 24 14 11.5 12.57 13.38 fh34srj-26s-0.5sh(50) 580-1247-8 50 26 15 12.5 13.57 14.38 fh34srj-30s-0.5sh(50) 580-1232-0 50 30 17 14.5 15.57 16.38 fh34srj-34s-0.5sh(50) 580-1261-9 50 34 19 16.5 17.53 18.38 fh34srj-40s-0.5sh(50) 580-1260-6 50 40 22 19.5 20.53 21.38 fh34srj-45s-0.5sh(50) 580-1265-0 50 45 24.5 22 23.03 23.88 fh34srj-50s-0.5sh(50) 580-1266-2 50 50 27 24.5 25.53 26.38 tape and reel packaging. order by number of reels.

note 1 : the coplanarity of each terminal lead within specified dimension is 0.1mm max. note 2 : packaged on tape and reel only. check packaging specification. note 3 : slight variations in color of the plastic compounds do not affect form, fit or function of the connector. note 4 : after reflow, the terminal plating may change color, however this does not represent a quality issue. fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 4 recommended pcb mounting pattern b x 0.30.05 0.065 nx x 0.1 contact no.1 connector image : underside 0.25 0.25 2.9 0.15 0.15 0.185 0.5 e0.1 0.80.05 0.80.05 3.30.05 f0.1 /? recommended fpc/ffc dimensions unit : mm part no. hrs no. no. of contacts befg fh34srj-4s-0.5sh(50) 580-1238-7 50 4 1.5 3.1 3.9 2.5 fh34srj-5s-0.5sh(50) 580-1264-7 50 5 2 3.6 4.4 3 fh34srj-6s-0.5sh(50) 580-1236-1 50 6 2.5 4.1 4.9 3.5 fh34srj-7s-0.5sh(50) 580-1200-0 50 7 3 4.6 5.4 4 fh34srj-8s-0.5sh(50) 580-1231-8 50 8 3.5 5.1 5.9 4.5 fh34srj-9s-0.5sh(50) 580-1262-1 50 9 4 5.6 6.4 5 fh34srj-10s-0.5sh(50) 580-1251-5 50 10 4.5 6.1 6.9 5.5 fh34srj-11s-0.5sh(50) 580-1258-4 50 11 5 6.6 7.4 6 fh34srj-12s-0.5sh(50) 580-1253-0 50 12 5.5 7.1 7.9 6.5 fh34srj-14s-0.5sh(50) 580-1252-8 50 14 6.5 8.1 8.9 7.5 fh34srj-16s-0.5sh(50) 580-1259-7 50 16 7.5 9.1 9.9 8.5 fh34srj-18s-0.5sh(50) 580-1248-0 50 18 8.5 10.1 10.9 9.5 fh34srj-20s-0.5sh(50) 580-1256-9 50 20 9.5 11.1 11.9 10.5 fh34srj-22s-0.5sh(50) 580-1254-3 50 22 10.5 12.1 12.9 11.5 fh34srj-24s-0.5sh(50) 580-1255-6 50 24 11.5 13.1 13.9 12.5 fh34srj-26s-0.5sh(50) 580-1247-8 50 26 12.5 14.1 14.9 13.5 fh34srj-30s-0.5sh(50) 580-1232-0 50 30 14.5 16.1 16.9 15.5 fh34srj-34s-0.5sh(50) 580-1261-9 50 34 16.5 18.1 18.9 17.5 fh34srj-40s-0.5sh(50) 580-1260-6 50 40 19.5 21.1 21.9 20.5 fh34srj-45s-0.5sh(50) 580-1265-0 50 45 22 23.6 24.4 23 fh34srj-50s-0.5sh(50) 580-1266-2 50 50 24.5 26.1 26.9 25.5 nx contact no.1(top contact) (uncovered area) b 0.50.07 g0.05 0.50.07 r0.20.1 0.5 0.30.03 0.30.03 0.03 z z contact no.1(bottom contact) 1.50.3 2.50.3 (stiffener) p nx pcb mounting pattern image 0.250.03 0.650.03 3.30.03 0.80.03 e0.03 f0.03 0.5 b y y 0.03 recommended stencil pattern (recommended stencil thickness : t=0.1mm) note 1 : dimension p shall be 0.5mm min. note 2 : the recommended fpc pattern above has been designed only for fh34srj series. when using the fpc for fh19sc series (lower contact), uncoverd area shall be 2.50.3mm and stiffener shall be 3.5mm min. /? recommended pcb mounting pattern and metal mask dimensions y fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 5 /? recommended fpc construction 1. using single-sided fpc fpc : flexible printed circuit fpc : flexible printed circuit material name material material thickness (m) 2. using double-sided fpc 1. this specification is a recommendation for the construction of the fh34srj series fpc and ffc (t=0.3 0.03). 2. for details about the construction, please contact the fpc/ffc manufacturers. * to prevent release of the fpc due to its bending, use of the double sided fpc with copper foil on the back side is not recommended. covering film layer cover adhesive polyimide 1 mil thick 25 25 material name material material thickness (m) 3. using ffc ffc : flexible flat cable * tolerance of 20m. material name material material thickness (m) ? contact fpc manufacturer for specific details. surface treatment 0.2m thick gold plated over 1 to 5m thick nickel underplating 3 copper foil base adhesive base film reinforcement material adhesive stiffener cu 1oz thermosetting adhesive polyimide 1 mil thick thermosetting adhesive polyimide 7 mil thick 35 25 25 35 175 total 298 polyester film adhesive thermoplastic polyester (12) (30) 35 30 12 30 188 295 gold plated annealed copper foil adhesive polyester adhesive stiffener polyester polyester polyester total (25) (25) covering layer film cover adhesive polyimide 1 mil thick surface treatment 0.2m thick gold plated over 1 to 5m thick nickel underplating 3 through-hole copper copper foil base adhesive base film base adhesive cu cu 1/2oz thermosetting adhesive polyimide 1 mil thick 15 18 18 25 18 copper foil cover adhesive covering film layer reinforcement material adhesive stiffener cu 1/2oz thermosetting adhesive polyimide 1 mil thick thermosetting adhesive polyimide 4 mil thick (18) 25 25 50 100 total 297 fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 6 400mm min(leader) 100mm min (empty) 1600mm min (trailer ~ empty) embossed carrier tape top cover tape direction of unreeling (l : inside) ?13 (m : outside) ?380 ?80 24mm max direction of unreeling 40.1 1.95 80.1 ?1.5 +0.1 0 1.750.1 j0.1 h0.3 2 0.3 32mm min 40.1 80.1 ?1.5 +0.1 0 1.7 +0.15 0 2 0.3 1.95 1.750.1 j0.1 k0.1 h0.3 direction of unreeling 1.5 +0.1 0 /? packaging specification ? reel dimensions ? embossed carrier tape dimensions (tape width 24mm max.) ? embossed carrier tape dimensions (tape width 32mm min.) unit : mm part no. hrs no. no. of contacts hjklm fh34srj-4s-0.5sh(50) 580-1238-7 50 4 16 7.5 ? 17.4 21.4 fh34srj-5s-0.5sh(50) 580-1264-7 50 5 ? fh34srj-6s-0.5sh(50) 580-1236-1 50 6 ? fh34srj-7s-0.5sh(50) 580-1200-0 50 7 ? fh34srj-8s-0.5sh(50) 580-1231-8 50 8 ? fh34srj-9s-0.5sh(50) 580-1262-1 50 9 ? fh34srj-10s-0.5sh(50) 580-1251-5 50 10 ? fh34srj-11s-0.5sh(50) 580-1258-4 50 11 ? fh34srj-12s-0.5sh(50) 580-1253-0 50 12 24 11.5 ? 25.4 29.4 fh34srj-14s-0.5sh(50) 580-1252-8 50 14 ? fh34srj-16s-0.5sh(50) 580-1259-7 50 16 ? fh34srj-18s-0.5sh(50) 580-1248-0 50 18 ? fh34srj-20s-0.5sh(50) 580-1256-9 50 20 ? fh34srj-22s-0.5sh(50) 580-1254-3 50 22 ? fh34srj-24s-0.5sh(50) 580-1255-6 50 24 ? fh34srj-26s-0.5sh(50) 580-1247-8 50 26 ? fh34srj-30s-0.5sh(50) 580-1232-0 50 30 32 14.2 28.4 33.4 37.4 fh34srj-34s-0.5sh(50) 580-1261-9 50 34 fh34srj-40s-0.5sh(50) 580-1260-6 50 40 44 20.2 40.4 45.4 49.4 fh34srj-45s-0.5sh(50) 580-1265-0 50 45 fh34srj-50s-0.5sh(50) 580-1266-2 50 50 fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 7 max 250? start temperature(?) time (seconds) 25? (60 sec.) (60 sec.) 90 to 120 sec. preheating soldering 0 50 100 150 150? 200? 230? 200 250 hrs test condition solder method : reflow, ir/hot air environment : room air solder composition : paste, 96.5%sn/3.0%ag/0.5%cu (senju metal industry, co., ltd.'s part number: m705-221cm5-42-10.5) test board : glass epoxy 18.3mm32.85mm0.8mm thick land dimensions : 0.3mm0.8mm metal mask : 0.250.650.1mm thick the temperature profiles shown are based on the above conditions. in individual applications the actual temperature may vary, depending on solder paste type, volume / thickness and board size / thickness. consult your solder paste and equipment manufacturer for specific recommendations. /? temperature profile fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 8 actuator open actuator close pcb pcb fpc fpc /? operation and precautions operation 1. as delivered 2. fpc/ffc insertion 3. fpc/ffc insertion (the top contact specification) delivered with the actuator open. there is no need to operate the actuator prior to inserting the fpc/ffc. | precautions ~ do not close the actuator without the fpc/fpc inserted. be sure that the fpc is parallel to the surface of the pcb, then completely insert into the connector. | caution ~ do not attempt to insert the fpc if actuator is closed. ~ if the actuator is closed and if the fpc is twisted during insertion, it can cause contact deformation and / or contact failure. proper insertion skewed insertion shallow insertion ^ insert the fpc/ffc with the conductive surfaces facing up. align the fpc/ffc straight with the connector and insert it firmly all the way. caution : handle connectors carefully, as they are very small and thin. please refer to this section for verification of the following points: ^ the actuator packaged in the open condition. the actuator packaged in the open condition. boundary of fpc pattern edge of housing opening boundary of fpc pattern edge of housing opening ^ exercise care when handling connectors. follow recommendations given below. fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 9 operation do not press down on the actuator or housing do not press down on the actuator or housing lift at the center lift at the center do not rotate the actuator by the ends do not rotate the actuator by the ends flip actuator up to open flip actuator up to open do not apply force to the actuator in the direction shown when it is fully open. opening to an angle greater than 90c will break or damage the connector. do not apply force to the actuator in the direction shown when it is fully open. opening to an angle greater than 90c will break or damage the connector. lift at the center lift at the center do not rotate the actuator by the ends do not rotate the actuator by the ends . locking . fpcffc remoal lock release ^ after fpc/ffc insertion, rotate the actuator down to a full stop, pushing it at the center. ^ carefully rotate the actuator up to 90? lifting it at the center. * this connector uses a back flip type structure. the insert direction of the fpc and the actuator are different from front flip type connectors. do not to try to open the actuator from the fpc side. /? operation and precautions rotate rotate fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 10 fpc fpc stiffener film pcb pcb stiffener film component part pcb operation 6. fpc routing ^ fpc should be routed in a manner that no strain or load is exerted onto the fpc. placing any strain on the fpc may result in unintentional disconnect or damage to the fpc, which can lead to issues such as contact failure. | caution ~ do not allow the fpc or stiffener to touch the casings, housings or any other items. ~ when routing the fpc, make sure that no strain or load is applied to the connector in a pulling, pushing or side-to-side motion. additionally, make sure that no excessive upward or downward force is applied to the connector. ~ when routing the fpc, make sure that there is a stress free path for the fpc and the stiffener is parallel to the pcb. observe correct bend radiuses. ~ do not place or mount any parts that will interfere with the fpc routing. /? operation and precautions e fpc routing . fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 11 /? operation and precautions precautions when mounting connectors on the pcb s handling before mounting on pcb y insertion of the fpc/ffc or operation of the actuator prior to mounting on the pcb is not recommended. s pc board warpage minimize the warpage as much as possible. the connecto r are straight within 0.1 mm max. make sure that the mounting area flatness can accept the connector terminals without caus ing any failure of the solder joints. s forces on the board s when braking the large pc board into individual boards exercise care not to damage the installed connectors. s when attaching the boards or other components with the screws make sure that any stresses will not cause board deflections affecting the mounting areas of the connector. s when hand soldering: ?do not perform hand soldering with the fpc inserted in the connector. * do not apply excessive heat or touch the soldering iron anywhere other than the connector leads. * do not use excessive amount of solder or flux compounds. operation of the actuator or contacts may be affected by excessive amounts of solder or flux compounds. connectors pcb fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 12 the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 05/2017. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? usa: hirose electric (u.s.a.), inc. san jose office 2841 junction ave, suite 200 san jose, ca. 95134 phone : +1-408-253-9640 fax : +1-408-253-9641 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. detroit office (automotive) 17197 n. laurel park drive, suite 253, livonia, mi 48152 phone : +1-734-542-9963 fax : +1-734-542-9964 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. boston office 300 brickstone square suite 201, andover, ma 01810 phone : +1-978-662-5255 usa: hirose electric (u.s.a.), inc. headquarters chicago office 2300 warrenville road, suite 150, downers grove, il 60515 phone : +1-630-282-6700 http://www.hirose.com/us/ china: hirose electric technologies (shenzhen) co., ltd. room 09-13, 19/f, office tower shun hing square, di wang commercial centre, 5002 shen nan dong road, shenzhen city, guangdong province, 518008 phone : +86-755-8207-0851 fax : +86-755-8207-0873 http://www.hirose.com/cn/ korea: hirose korea co.,ltd. 250, huimanggongwon-ro, siheung-si, gyeonggi-do, korea, 15083 phone : +82-31-496-7000 or 7124 fax : +82-31-496-7100 http://www.hirose.co.kr/ germany: hirose electric europe b.v. nuremberg office neumeyerstrasse 22-26, 90411 nurnberg phone : +49-911 32 68 89 63 fax : +49-911 32 68 89 69 http://www.hirose.com/eu/ germany: hirose electric europe b.v. hanover office bayernstr. 3, haus c 30855 langenhagen, germany phone : +49-511 97 82 61 30 fax : +49-511 97 82 61 35 http://www.hirose.com/eu/ germany: hirose electric europe b.v. german branch schoenbergstr. 20, 73760 ostfildern phone : +49-711-456002-1 fax : +49-711-456002-299 http://www.hirose.com/eu/ france: hirose electric europe b.v. paris office regus la garenne colombes,place de la belgique, 71 boulevard national la garenne colombes, 92250, france phone : +33 (0) 1 7082 3170 fax : +33 (1) 7082 3101 http://www.hirose.com/eu/ the netherlands: hirose electric europe b.v. hogehillweg #8 1101 cc amsterdam z-o phone : +31-20-6557460 fax : +31-20-6557469 http://www.hirose.com/eu/ united kingdom: hirose electric europe bv (uk branch) 4 newton court, kelvin drive, knowlhill, milton keynes, mk5 8nh phone : +44-1908 202050 fax : +44-1908 202058 http://www.hirose.com/eu/ china: hirose electric (shanghai) co., ltd. 18, enterprise center tower 2, 209# gong he road, jing?an district, shanghai, china 200070 phone : +86-21-6391-3355 fax : +86-21-6391-3335 http://www.hirose.com/cn/ china: hirose electric (shanghai) co.,ltd. beijing branch a1001, ocean international center, building 56# east 4th ring middle road, chaoyang district, beijing, 100025 phone : +86-10-5165-9332 fax : +86-10-5908-1381 http://www.hirose.com/cn/ taiwan: hirose electric taiwan co., ltd. 103 8f, no.87, zhengzhou rd., taipei phone : +886-2-2555-7377 fax : +886-2-2555-7350 http://www.hirose.com/tw/ hong kong: hirose electric hongkong trading co., ltd. room 1001, west wing, tsim sha tsui centre, 66 mody road, tsim sha tsui east, kowloon, hong kong phone : +852-2803-5338 fax : +852-2591-6560 http://www.hirose.com/hk/ india: hirose electric singapore pte. ltd. delhi liaison office office no.552, regus-green bo ulevard, level5, tower c, sec62, plot b-9a, block b, noida, 201301, uttar pradesh, india phone : +91-12-660-8018 fax : +91-120-4804949 http://www.hirose.com/sg/ singapore: hirose electric singapore pte. ltd. 10 anson road #26-16, international plaza 079903, singapore phone : +65-6324-6113 fax : + 65-6324-6123 http://www.hirose.com/sg/ india: hirose electric singapore pte. ltd. bangalore liaison office unit no-403, 4th floor, no-84, barton centre, mahatma gandhi (mg) road, bangalore 560 001, karnataka, india phone : +91-80-4120 1907 fax : +91-80-4120 9908 http://www.hirose.com/sg/ malaysia: penang representative office 1-21-01, suntech @ penang cybercity (1164), lintang mayang pasir 3,11950, bayan baru, penang, malaysia. phone : +604-619-2564 fax : +604-619-2574 http://www.hirose.com/sg/ thailand: bangkok office (representative office) unit 4703, 47th fl., 1 empire tower, south sathorn road, yannawa, sathorn, bangkok 10120 thailand phone : +66-2-686-1255 fax : +66-2-686-3433 http://www.hirose.com/sg/
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. 1 2017.5 ? 5pq#puupndpoubdujnqspwftuifeftjhoqfyjcjmjuz 5bqfstpobmmjoofsxbmmt product length : l=0.5(n-1)+2.5 *n : number of positions depth : 3.8mm height : 1.0mm ? fh34srj differential impedance yqtsjtfujnf ? ? top/bottom contact ? smooth fpc / ffc insertion 5(35%5; 5jnf ot
dpoofdups '1$ 4 4qfd features 1. low-profile with the 1.0mm above the board and width of 3.8mm the connectors are used in space saving applications. 2. increased fpc/ffc retention as compared with existing similar construction connectors : * in horizontal direction : approximately 2.6 times higher * in vertical direction : approximately 2 times higher 3. unique back-flip rotating actuator the rotating actuator opens from the back of the connector, assuring reliable electrical and mechanical connection. 4. easy fpc insertion and reliable electrical connection proven flip lock actuator allows easy insertion of fpc and provides a tactile sensation when fully closed, confirming complete electrical and mechanical connection. 5. delivered with the actuator open fpc/fpc can be immediately inserted without the need for the opening of the actuator. 6. accepts standard fpc thickness 0.3mm thick standard flexible printed circuit (fpc) can be used. this is the only ultra-low profile zif connector using standard fpc. 7. conductive traces on the pcb can run under the connector no exposed contacts on the bottom of the connector. 8.halogen-free * *as defined by iec61249-2-21 br-900ppm maximum, cl-900ppm maximum, cl + br combined-1,500ppm maximum 9. board placement with automatic equipment flat upper surface and tape and reel packaging facilitate vacuum pick-up and placement. standard reel packaging contains 5000 connectors. fig.1 fig.2 fig.3 fig.4 ? 3.8mm depth 0.5mm pitch, 1.0mm above the board top and top/bottom contact, back-flip actuator flexible printed circuit & flexible flat cable zif connectors fh34srj series in cases where the application will demand a high level of reliability, such as automotive, please contact a company representative for further information. fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 2 product specifications ratings current rating 0.5a (note 1) voltage rating 50vrms ac operating temperature range : -55 to +85? (note 2) operating humidity range : relative humidity 90% max. (no condensation) storage temperature range : -10 to +50? (note 3) storage humidity range : relative humidity 90% max. (no condensation) recommended fpc/ffc thickness : 0.3 ?0.03 mm, gold plated contact pads item specification conditions 1. insulation resistance 500m?min. 100v dc 2. withstanding voltage no flashover or insulation breakdown 250vrms ac / 1 minute 3. contact resistance 100m?max. * including fpc and ffc conductor resistance 1ma, ac / dc 20mv max (ac : 1khz) 4. durability contact resistance : 100m?max. no damage, cracks, or parts dislocation 20cycles 5. vibration no electrical discontinuity of 1? or longer contact resistance : 100m?max. no damage, cracks, or parts dislocation frequency : 10 to 55 hz, single amplitude of 0.75 mm, 10 cycles in each of the 3 axis 6. shock no electrical discontinuity of 1? or longer contact resistance : 100m?max. no damage, cracks, or parts dislocation acceleration of 981m/s 2 , 6 ms duration, sine half- wave, 3 cycles in each of the 3 axis 7. humidity (steady state) contact resistance : 100m?max. insulation resistance : 50m?min. no damage, cracks, or parts dislocation 96 hours at 40? and humidity of 90 to 95% 8. temperature cycle contact resistance : 100m?max. insulation resistance : 50m?min. no damage, cracks, or parts dislocation temperature : -55? / +15? to +35? / +85? / +15? to +35? time: 30 / 2 to 3 / 30 / 2 to 3 minutes 5 cycles 9. resistance to soldering heat no deformation of components affecting performance reflow : at the recommended temperature profile manual soldering: 350? ?0? for 5 seconds (note 3) note1 : when passing the current through all of the contacts, use 70% of the rated current. note2 : includes temperature rise caused by current flow. note3 : the term "storage" refers to products stored for a long period prior to mounting and use. the operating temperature and humidity range covers the non-conducting condition of installed connectors in storage, shipment or during transportation after board mounting. materials / finish part material finish remarks insulator lcp color : gray ul94v-0 pa color : black lcp(8pos.) contacts phosphor bronze gold plating with nickel barrier ??? metalfittings phosphor bronze pure tin reflow plating ??? product number structure refer to the chart below when determining the product specifications from the product number. please select from the product numbers listed in this catalog when placing orders. fh 34s rj ? 30s ? 0.5 sh ( 50 ) ^ _ ` a b c d ^ series name : fh b contact pitch : 0.5mm _ series no. : 34s c termination type sh : smt horizontal mounting type ` rj top and bottom contact, halogen-free (flame retardance ul94v-0). d specifications (50)? standard product 5,000 pcs/reel (99)? 500 pcs/reel a number of contacts : 4 to 50 fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 3 number of contacts contact no.1 polarization mark cav no. number of contacts indicator hrs mark lot no. connector dimensions unit : mm part no. hrs no. no. of contacts abcd fh34srj-4s-0.5sh(50) 580-1238-7 50 4 4 1.5 2.53 3.38 fh34srj-5s-0.5sh(50) 580-1264-7 50 5 4.5 2 3.03 3.88 fh34srj-6s-0.5sh(50) 580-1236-1 50 6 5 2.5 3.53 4.38 fh34srj-7s-0.5sh(50) 580-1200-0 50 7 5.5 3 4.03 4.88 fh34srj-8s-0.5sh(50) 580-1231-8 50 8 6 3.5 4.53 5.38 fh34srj-9s-0.5sh(50) 580-1262-1 50 9 6.5 4 5.03 5.88 fh34srj-10s-0.5sh(50) 580-1251-5 50 10 7 4.5 5.53 6.38 fh34srj-11s-0.5sh(50) 580-1258-4 50 11 7.5 5 6.03 6.88 fh34srj-12s-0.5sh(50) 580-1253-0 50 12 8 5.5 6.53 7.38 fh34srj-14s-0.5sh(50) 580-1252-8 50 14 9 6.5 7.53 8.38 fh34srj-16s-0.5sh(50) 580-1259-7 50 16 10 7.5 8.57 9.38 fh34srj-18s-0.5sh(50) 580-1248-0 50 18 11 8.5 9.57 10.38 fh34srj-20s-0.5sh(50) 580-1256-9 50 20 12 9.5 10.57 11.38 fh34srj-22s-0.5sh(50) 580-1254-3 50 22 13 10.5 11.57 12.38 fh34srj-24s-0.5sh(50) 580-1255-6 50 24 14 11.5 12.57 13.38 fh34srj-26s-0.5sh(50) 580-1247-8 50 26 15 12.5 13.57 14.38 fh34srj-30s-0.5sh(50) 580-1232-0 50 30 17 14.5 15.57 16.38 fh34srj-34s-0.5sh(50) 580-1261-9 50 34 19 16.5 17.53 18.38 fh34srj-40s-0.5sh(50) 580-1260-6 50 40 22 19.5 20.53 21.38 fh34srj-45s-0.5sh(50) 580-1265-0 50 45 24.5 22 23.03 23.88 fh34srj-50s-0.5sh(50) 580-1266-2 50 50 27 24.5 25.53 26.38 tape and reel packaging. order by number of reels.

note 1 : the coplanarity of each terminal lead within specified dimension is 0.1mm max. note 2 : packaged on tape and reel only. check packaging specification. note 3 : slight variations in color of the plastic compounds do not affect form, fit or function of the connector. note 4 : after reflow, the terminal plating may change color, however this does not represent a quality issue. fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 4 recommended pcb mounting pattern b x 0.30.05 0.065 nx x 0.1 contact no.1 connector image : underside 0.25 0.25 2.9 0.15 0.15 0.185 0.5 e0.1 0.80.05 0.80.05 3.30.05 f0.1 /? recommended fpc/ffc dimensions unit : mm part no. hrs no. no. of contacts befg fh34srj-4s-0.5sh(50) 580-1238-7 50 4 1.5 3.1 3.9 2.5 fh34srj-5s-0.5sh(50) 580-1264-7 50 5 2 3.6 4.4 3 fh34srj-6s-0.5sh(50) 580-1236-1 50 6 2.5 4.1 4.9 3.5 fh34srj-7s-0.5sh(50) 580-1200-0 50 7 3 4.6 5.4 4 fh34srj-8s-0.5sh(50) 580-1231-8 50 8 3.5 5.1 5.9 4.5 fh34srj-9s-0.5sh(50) 580-1262-1 50 9 4 5.6 6.4 5 fh34srj-10s-0.5sh(50) 580-1251-5 50 10 4.5 6.1 6.9 5.5 fh34srj-11s-0.5sh(50) 580-1258-4 50 11 5 6.6 7.4 6 fh34srj-12s-0.5sh(50) 580-1253-0 50 12 5.5 7.1 7.9 6.5 fh34srj-14s-0.5sh(50) 580-1252-8 50 14 6.5 8.1 8.9 7.5 fh34srj-16s-0.5sh(50) 580-1259-7 50 16 7.5 9.1 9.9 8.5 fh34srj-18s-0.5sh(50) 580-1248-0 50 18 8.5 10.1 10.9 9.5 fh34srj-20s-0.5sh(50) 580-1256-9 50 20 9.5 11.1 11.9 10.5 fh34srj-22s-0.5sh(50) 580-1254-3 50 22 10.5 12.1 12.9 11.5 fh34srj-24s-0.5sh(50) 580-1255-6 50 24 11.5 13.1 13.9 12.5 fh34srj-26s-0.5sh(50) 580-1247-8 50 26 12.5 14.1 14.9 13.5 fh34srj-30s-0.5sh(50) 580-1232-0 50 30 14.5 16.1 16.9 15.5 fh34srj-34s-0.5sh(50) 580-1261-9 50 34 16.5 18.1 18.9 17.5 fh34srj-40s-0.5sh(50) 580-1260-6 50 40 19.5 21.1 21.9 20.5 fh34srj-45s-0.5sh(50) 580-1265-0 50 45 22 23.6 24.4 23 fh34srj-50s-0.5sh(50) 580-1266-2 50 50 24.5 26.1 26.9 25.5 nx contact no.1(top contact) (uncovered area) b 0.50.07 g0.05 0.50.07 r0.20.1 0.5 0.30.03 0.30.03 0.03 z z contact no.1(bottom contact) 1.50.3 2.50.3 (stiffener) p nx pcb mounting pattern image 0.250.03 0.650.03 3.30.03 0.80.03 e0.03 f0.03 0.5 b y y 0.03 recommended stencil pattern (recommended stencil thickness : t=0.1mm) note 1 : dimension p shall be 0.5mm min. note 2 : the recommended fpc pattern above has been designed only for fh34srj series. when using the fpc for fh19sc series (lower contact), uncoverd area shall be 2.50.3mm and stiffener shall be 3.5mm min. /? recommended pcb mounting pattern and metal mask dimensions y fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 5 /? recommended fpc construction 1. using single-sided fpc fpc : flexible printed circuit fpc : flexible printed circuit material name material material thickness (m) 2. using double-sided fpc 1. this specification is a recommendation for the construction of the fh34srj series fpc and ffc (t=0.3 0.03). 2. for details about the construction, please contact the fpc/ffc manufacturers. * to prevent release of the fpc due to its bending, use of the double sided fpc with copper foil on the back side is not recommended. covering film layer cover adhesive polyimide 1 mil thick 25 25 material name material material thickness (m) 3. using ffc ffc : flexible flat cable * tolerance of 20m. material name material material thickness (m) ? contact fpc manufacturer for specific details. surface treatment 0.2m thick gold plated over 1 to 5m thick nickel underplating 3 copper foil base adhesive base film reinforcement material adhesive stiffener cu 1oz thermosetting adhesive polyimide 1 mil thick thermosetting adhesive polyimide 7 mil thick 35 25 25 35 175 total 298 polyester film adhesive thermoplastic polyester (12) (30) 35 30 12 30 188 295 gold plated annealed copper foil adhesive polyester adhesive stiffener polyester polyester polyester total (25) (25) covering layer film cover adhesive polyimide 1 mil thick surface treatment 0.2m thick gold plated over 1 to 5m thick nickel underplating 3 through-hole copper copper foil base adhesive base film base adhesive cu cu 1/2oz thermosetting adhesive polyimide 1 mil thick 15 18 18 25 18 copper foil cover adhesive covering film layer reinforcement material adhesive stiffener cu 1/2oz thermosetting adhesive polyimide 1 mil thick thermosetting adhesive polyimide 4 mil thick (18) 25 25 50 100 total 297 fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 6 400mm min(leader) 100mm min (empty) 1600mm min (trailer ~ empty) embossed carrier tape top cover tape direction of unreeling (l : inside) ?13 (m : outside) ?380 ?80 24mm max direction of unreeling 40.1 1.95 80.1 ?1.5 +0.1 0 1.750.1 j0.1 h0.3 2 0.3 32mm min 40.1 80.1 ?1.5 +0.1 0 1.7 +0.15 0 2 0.3 1.95 1.750.1 j0.1 k0.1 h0.3 direction of unreeling 1.5 +0.1 0 /? packaging specification ? reel dimensions ? embossed carrier tape dimensions (tape width 24mm max.) ? embossed carrier tape dimensions (tape width 32mm min.) unit : mm part no. hrs no. no. of contacts hjklm fh34srj-4s-0.5sh(50) 580-1238-7 50 4 16 7.5 ? 17.4 21.4 fh34srj-5s-0.5sh(50) 580-1264-7 50 5 ? fh34srj-6s-0.5sh(50) 580-1236-1 50 6 ? fh34srj-7s-0.5sh(50) 580-1200-0 50 7 ? fh34srj-8s-0.5sh(50) 580-1231-8 50 8 ? fh34srj-9s-0.5sh(50) 580-1262-1 50 9 ? fh34srj-10s-0.5sh(50) 580-1251-5 50 10 ? fh34srj-11s-0.5sh(50) 580-1258-4 50 11 ? fh34srj-12s-0.5sh(50) 580-1253-0 50 12 24 11.5 ? 25.4 29.4 fh34srj-14s-0.5sh(50) 580-1252-8 50 14 ? fh34srj-16s-0.5sh(50) 580-1259-7 50 16 ? fh34srj-18s-0.5sh(50) 580-1248-0 50 18 ? fh34srj-20s-0.5sh(50) 580-1256-9 50 20 ? fh34srj-22s-0.5sh(50) 580-1254-3 50 22 ? fh34srj-24s-0.5sh(50) 580-1255-6 50 24 ? fh34srj-26s-0.5sh(50) 580-1247-8 50 26 ? fh34srj-30s-0.5sh(50) 580-1232-0 50 30 32 14.2 28.4 33.4 37.4 fh34srj-34s-0.5sh(50) 580-1261-9 50 34 fh34srj-40s-0.5sh(50) 580-1260-6 50 40 44 20.2 40.4 45.4 49.4 fh34srj-45s-0.5sh(50) 580-1265-0 50 45 fh34srj-50s-0.5sh(50) 580-1266-2 50 50 fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 7 max 250? start temperature(?) time (seconds) 25? (60 sec.) (60 sec.) 90 to 120 sec. preheating soldering 0 50 100 150 150? 200? 230? 200 250 hrs test condition solder method : reflow, ir/hot air environment : room air solder composition : paste, 96.5%sn/3.0%ag/0.5%cu (senju metal industry, co., ltd.'s part number: m705-221cm5-42-10.5) test board : glass epoxy 18.3mm32.85mm0.8mm thick land dimensions : 0.3mm0.8mm metal mask : 0.250.650.1mm thick the temperature profiles shown are based on the above conditions. in individual applications the actual temperature may vary, depending on solder paste type, volume / thickness and board size / thickness. consult your solder paste and equipment manufacturer for specific recommendations. /? temperature profile fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 8 actuator open actuator close pcb pcb fpc fpc /? operation and precautions operation 1. as delivered 2. fpc/ffc insertion 3. fpc/ffc insertion (the top contact specification) delivered with the actuator open. there is no need to operate the actuator prior to inserting the fpc/ffc. | precautions ~ do not close the actuator without the fpc/fpc inserted. be sure that the fpc is parallel to the surface of the pcb, then completely insert into the connector. | caution ~ do not attempt to insert the fpc if actuator is closed. ~ if the actuator is closed and if the fpc is twisted during insertion, it can cause contact deformation and / or contact failure. proper insertion skewed insertion shallow insertion ^ insert the fpc/ffc with the conductive surfaces facing up. align the fpc/ffc straight with the connector and insert it firmly all the way. caution : handle connectors carefully, as they are very small and thin. please refer to this section for verification of the following points: ^ the actuator packaged in the open condition. the actuator packaged in the open condition. boundary of fpc pattern edge of housing opening boundary of fpc pattern edge of housing opening ^ exercise care when handling connectors. follow recommendations given below. fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 9 operation do not press down on the actuator or housing do not press down on the actuator or housing lift at the center lift at the center do not rotate the actuator by the ends do not rotate the actuator by the ends flip actuator up to open flip actuator up to open do not apply force to the actuator in the direction shown when it is fully open. opening to an angle greater than 90c will break or damage the connector. do not apply force to the actuator in the direction shown when it is fully open. opening to an angle greater than 90c will break or damage the connector. lift at the center lift at the center do not rotate the actuator by the ends do not rotate the actuator by the ends . locking . fpcffc remoal lock release ^ after fpc/ffc insertion, rotate the actuator down to a full stop, pushing it at the center. ^ carefully rotate the actuator up to 90? lifting it at the center. * this connector uses a back flip type structure. the insert direction of the fpc and the actuator are different from front flip type connectors. do not to try to open the actuator from the fpc side. /? operation and precautions rotate rotate fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 10 fpc fpc stiffener film pcb pcb stiffener film component part pcb operation 6. fpc routing ^ fpc should be routed in a manner that no strain or load is exerted onto the fpc. placing any strain on the fpc may result in unintentional disconnect or damage to the fpc, which can lead to issues such as contact failure. | caution ~ do not allow the fpc or stiffener to touch the casings, housings or any other items. ~ when routing the fpc, make sure that no strain or load is applied to the connector in a pulling, pushing or side-to-side motion. additionally, make sure that no excessive upward or downward force is applied to the connector. ~ when routing the fpc, make sure that there is a stress free path for the fpc and the stiffener is parallel to the pcb. observe correct bend radiuses. ~ do not place or mount any parts that will interfere with the fpc routing. /? operation and precautions e fpc routing . fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 11 /? operation and precautions precautions when mounting connectors on the pcb s handling before mounting on pcb y insertion of the fpc/ffc or operation of the actuator prior to mounting on the pcb is not recommended. s pc board warpage minimize the warpage as much as possible. the connecto r are straight within 0.1 mm max. make sure that the mounting area flatness can accept the connector terminals without caus ing any failure of the solder joints. s forces on the board s when braking the large pc board into individual boards exercise care not to damage the installed connectors. s when attaching the boards or other components with the screws make sure that any stresses will not cause board deflections affecting the mounting areas of the connector. s when hand soldering: ?do not perform hand soldering with the fpc inserted in the connector. * do not apply excessive heat or touch the soldering iron anywhere other than the connector leads. * do not use excessive amount of solder or flux compounds. operation of the actuator or contacts may be affected by excessive amounts of solder or flux compounds. connectors pcb fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 12 the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 05/2017. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? usa: hirose electric (u.s.a.), inc. san jose office 2841 junction ave, suite 200 san jose, ca. 95134 phone : +1-408-253-9640 fax : +1-408-253-9641 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. detroit office (automotive) 17197 n. laurel park drive, suite 253, livonia, mi 48152 phone : +1-734-542-9963 fax : +1-734-542-9964 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. boston office 300 brickstone square suite 201, andover, ma 01810 phone : +1-978-662-5255 usa: hirose electric (u.s.a.), inc. headquarters chicago office 2300 warrenville road, suite 150, downers grove, il 60515 phone : +1-630-282-6700 http://www.hirose.com/us/ china: hirose electric technologies (shenzhen) co., ltd. room 09-13, 19/f, office tower shun hing square, di wang commercial centre, 5002 shen nan dong road, shenzhen city, guangdong province, 518008 phone : +86-755-8207-0851 fax : +86-755-8207-0873 http://www.hirose.com/cn/ korea: hirose korea co.,ltd. 250, huimanggongwon-ro, siheung-si, gyeonggi-do, korea, 15083 phone : +82-31-496-7000 or 7124 fax : +82-31-496-7100 http://www.hirose.co.kr/ germany: hirose electric europe b.v. nuremberg office neumeyerstrasse 22-26, 90411 nurnberg phone : +49-911 32 68 89 63 fax : +49-911 32 68 89 69 http://www.hirose.com/eu/ germany: hirose electric europe b.v. hanover office bayernstr. 3, haus c 30855 langenhagen, germany phone : +49-511 97 82 61 30 fax : +49-511 97 82 61 35 http://www.hirose.com/eu/ germany: hirose electric europe b.v. german branch schoenbergstr. 20, 73760 ostfildern phone : +49-711-456002-1 fax : +49-711-456002-299 http://www.hirose.com/eu/ france: hirose electric europe b.v. paris office regus la garenne colombes,place de la belgique, 71 boulevard national la garenne colombes, 92250, france phone : +33 (0) 1 7082 3170 fax : +33 (1) 7082 3101 http://www.hirose.com/eu/ the netherlands: hirose electric europe b.v. hogehillweg #8 1101 cc amsterdam z-o phone : +31-20-6557460 fax : +31-20-6557469 http://www.hirose.com/eu/ united kingdom: hirose electric europe bv (uk branch) 4 newton court, kelvin drive, knowlhill, milton keynes, mk5 8nh phone : +44-1908 202050 fax : +44-1908 202058 http://www.hirose.com/eu/ china: hirose electric (shanghai) co., ltd. 18, enterprise center tower 2, 209# gong he road, jing?an district, shanghai, china 200070 phone : +86-21-6391-3355 fax : +86-21-6391-3335 http://www.hirose.com/cn/ china: hirose electric (shanghai) co.,ltd. beijing branch a1001, ocean international center, building 56# east 4th ring middle road, chaoyang district, beijing, 100025 phone : +86-10-5165-9332 fax : +86-10-5908-1381 http://www.hirose.com/cn/ taiwan: hirose electric taiwan co., ltd. 103 8f, no.87, zhengzhou rd., taipei phone : +886-2-2555-7377 fax : +886-2-2555-7350 http://www.hirose.com/tw/ hong kong: hirose electric hongkong trading co., ltd. room 1001, west wing, tsim sha tsui centre, 66 mody road, tsim sha tsui east, kowloon, hong kong phone : +852-2803-5338 fax : +852-2591-6560 http://www.hirose.com/hk/ india: hirose electric singapore pte. ltd. delhi liaison office office no.552, regus-green bo ulevard, level5, tower c, sec62, plot b-9a, block b, noida, 201301, uttar pradesh, india phone : +91-12-660-8018 fax : +91-120-4804949 http://www.hirose.com/sg/ singapore: hirose electric singapore pte. ltd. 10 anson road #26-16, international plaza 079903, singapore phone : +65-6324-6113 fax : + 65-6324-6123 http://www.hirose.com/sg/ india: hirose electric singapore pte. ltd. bangalore liaison office unit no-403, 4th floor, no-84, barton centre, mahatma gandhi (mg) road, bangalore 560 001, karnataka, india phone : +91-80-4120 1907 fax : +91-80-4120 9908 http://www.hirose.com/sg/ malaysia: penang representative office 1-21-01, suntech @ penang cybercity (1164), lintang mayang pasir 3,11950, bayan baru, penang, malaysia. phone : +604-619-2564 fax : +604-619-2574 http://www.hirose.com/sg/ thailand: bangkok office (representative office) unit 4703, 47th fl., 1 empire tower, south sathorn road, yannawa, sathorn, bangkok 10120 thailand phone : +66-2-686-1255 fax : +66-2-686-3433 http://www.hirose.com/sg/
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. 1 2017.5 ? 5pq#puupndpoubdujnqspwftuifeftjhoqfyjcjmjuz 5bqfstpobmmjoofsxbmmt product length : l=0.5(n-1)+2.5 *n : number of positions depth : 3.8mm height : 1.0mm ? fh34srj differential impedance yqtsjtfujnf ? ? top/bottom contact ? smooth fpc / ffc insertion 5(35%5; 5jnf ot
dpoofdups '1$ 4 4qfd features 1. low-profile with the 1.0mm above the board and width of 3.8mm the connectors are used in space saving applications. 2. increased fpc/ffc retention as compared with existing similar construction connectors : * in horizontal direction : approximately 2.6 times higher * in vertical direction : approximately 2 times higher 3. unique back-flip rotating actuator the rotating actuator opens from the back of the connector, assuring reliable electrical and mechanical connection. 4. easy fpc insertion and reliable electrical connection proven flip lock actuator allows easy insertion of fpc and provides a tactile sensation when fully closed, confirming complete electrical and mechanical connection. 5. delivered with the actuator open fpc/fpc can be immediately inserted without the need for the opening of the actuator. 6. accepts standard fpc thickness 0.3mm thick standard flexible printed circuit (fpc) can be used. this is the only ultra-low profile zif connector using standard fpc. 7. conductive traces on the pcb can run under the connector no exposed contacts on the bottom of the connector. 8.halogen-free * *as defined by iec61249-2-21 br-900ppm maximum, cl-900ppm maximum, cl + br combined-1,500ppm maximum 9. board placement with automatic equipment flat upper surface and tape and reel packaging facilitate vacuum pick-up and placement. standard reel packaging contains 5000 connectors. fig.1 fig.2 fig.3 fig.4 ? 3.8mm depth 0.5mm pitch, 1.0mm above the board top and top/bottom contact, back-flip actuator flexible printed circuit & flexible flat cable zif connectors fh34srj series in cases where the application will demand a high level of reliability, such as automotive, please contact a company representative for further information. fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 2 product specifications ratings current rating 0.5a (note 1) voltage rating 50vrms ac operating temperature range : -55 to +85? (note 2) operating humidity range : relative humidity 90% max. (no condensation) storage temperature range : -10 to +50? (note 3) storage humidity range : relative humidity 90% max. (no condensation) recommended fpc/ffc thickness : 0.3 ?0.03 mm, gold plated contact pads item specification conditions 1. insulation resistance 500m?min. 100v dc 2. withstanding voltage no flashover or insulation breakdown 250vrms ac / 1 minute 3. contact resistance 100m?max. * including fpc and ffc conductor resistance 1ma, ac / dc 20mv max (ac : 1khz) 4. durability contact resistance : 100m?max. no damage, cracks, or parts dislocation 20cycles 5. vibration no electrical discontinuity of 1? or longer contact resistance : 100m?max. no damage, cracks, or parts dislocation frequency : 10 to 55 hz, single amplitude of 0.75 mm, 10 cycles in each of the 3 axis 6. shock no electrical discontinuity of 1? or longer contact resistance : 100m?max. no damage, cracks, or parts dislocation acceleration of 981m/s 2 , 6 ms duration, sine half- wave, 3 cycles in each of the 3 axis 7. humidity (steady state) contact resistance : 100m?max. insulation resistance : 50m?min. no damage, cracks, or parts dislocation 96 hours at 40? and humidity of 90 to 95% 8. temperature cycle contact resistance : 100m?max. insulation resistance : 50m?min. no damage, cracks, or parts dislocation temperature : -55? / +15? to +35? / +85? / +15? to +35? time: 30 / 2 to 3 / 30 / 2 to 3 minutes 5 cycles 9. resistance to soldering heat no deformation of components affecting performance reflow : at the recommended temperature profile manual soldering: 350? ?0? for 5 seconds (note 3) note1 : when passing the current through all of the contacts, use 70% of the rated current. note2 : includes temperature rise caused by current flow. note3 : the term "storage" refers to products stored for a long period prior to mounting and use. the operating temperature and humidity range covers the non-conducting condition of installed connectors in storage, shipment or during transportation after board mounting. materials / finish part material finish remarks insulator lcp color : gray ul94v-0 pa color : black lcp(8pos.) contacts phosphor bronze gold plating with nickel barrier ??? metalfittings phosphor bronze pure tin reflow plating ??? product number structure refer to the chart below when determining the product specifications from the product number. please select from the product numbers listed in this catalog when placing orders. fh 34s rj ? 30s ? 0.5 sh ( 50 ) ^ _ ` a b c d ^ series name : fh b contact pitch : 0.5mm _ series no. : 34s c termination type sh : smt horizontal mounting type ` rj top and bottom contact, halogen-free (flame retardance ul94v-0). d specifications (50)? standard product 5,000 pcs/reel (99)? 500 pcs/reel a number of contacts : 4 to 50 fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 3 number of contacts contact no.1 polarization mark cav no. number of contacts indicator hrs mark lot no. connector dimensions unit : mm part no. hrs no. no. of contacts abcd fh34srj-4s-0.5sh(50) 580-1238-7 50 4 4 1.5 2.53 3.38 fh34srj-5s-0.5sh(50) 580-1264-7 50 5 4.5 2 3.03 3.88 fh34srj-6s-0.5sh(50) 580-1236-1 50 6 5 2.5 3.53 4.38 fh34srj-7s-0.5sh(50) 580-1200-0 50 7 5.5 3 4.03 4.88 fh34srj-8s-0.5sh(50) 580-1231-8 50 8 6 3.5 4.53 5.38 fh34srj-9s-0.5sh(50) 580-1262-1 50 9 6.5 4 5.03 5.88 fh34srj-10s-0.5sh(50) 580-1251-5 50 10 7 4.5 5.53 6.38 fh34srj-11s-0.5sh(50) 580-1258-4 50 11 7.5 5 6.03 6.88 fh34srj-12s-0.5sh(50) 580-1253-0 50 12 8 5.5 6.53 7.38 fh34srj-14s-0.5sh(50) 580-1252-8 50 14 9 6.5 7.53 8.38 fh34srj-16s-0.5sh(50) 580-1259-7 50 16 10 7.5 8.57 9.38 fh34srj-18s-0.5sh(50) 580-1248-0 50 18 11 8.5 9.57 10.38 fh34srj-20s-0.5sh(50) 580-1256-9 50 20 12 9.5 10.57 11.38 fh34srj-22s-0.5sh(50) 580-1254-3 50 22 13 10.5 11.57 12.38 fh34srj-24s-0.5sh(50) 580-1255-6 50 24 14 11.5 12.57 13.38 fh34srj-26s-0.5sh(50) 580-1247-8 50 26 15 12.5 13.57 14.38 fh34srj-30s-0.5sh(50) 580-1232-0 50 30 17 14.5 15.57 16.38 fh34srj-34s-0.5sh(50) 580-1261-9 50 34 19 16.5 17.53 18.38 fh34srj-40s-0.5sh(50) 580-1260-6 50 40 22 19.5 20.53 21.38 fh34srj-45s-0.5sh(50) 580-1265-0 50 45 24.5 22 23.03 23.88 fh34srj-50s-0.5sh(50) 580-1266-2 50 50 27 24.5 25.53 26.38 tape and reel packaging. order by number of reels.

note 1 : the coplanarity of each terminal lead within specified dimension is 0.1mm max. note 2 : packaged on tape and reel only. check packaging specification. note 3 : slight variations in color of the plastic compounds do not affect form, fit or function of the connector. note 4 : after reflow, the terminal plating may change color, however this does not represent a quality issue. fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 4 recommended pcb mounting pattern b x 0.30.05 0.065 nx x 0.1 contact no.1 connector image : underside 0.25 0.25 2.9 0.15 0.15 0.185 0.5 e0.1 0.80.05 0.80.05 3.30.05 f0.1 /? recommended fpc/ffc dimensions unit : mm part no. hrs no. no. of contacts befg fh34srj-4s-0.5sh(50) 580-1238-7 50 4 1.5 3.1 3.9 2.5 fh34srj-5s-0.5sh(50) 580-1264-7 50 5 2 3.6 4.4 3 fh34srj-6s-0.5sh(50) 580-1236-1 50 6 2.5 4.1 4.9 3.5 fh34srj-7s-0.5sh(50) 580-1200-0 50 7 3 4.6 5.4 4 fh34srj-8s-0.5sh(50) 580-1231-8 50 8 3.5 5.1 5.9 4.5 fh34srj-9s-0.5sh(50) 580-1262-1 50 9 4 5.6 6.4 5 fh34srj-10s-0.5sh(50) 580-1251-5 50 10 4.5 6.1 6.9 5.5 fh34srj-11s-0.5sh(50) 580-1258-4 50 11 5 6.6 7.4 6 fh34srj-12s-0.5sh(50) 580-1253-0 50 12 5.5 7.1 7.9 6.5 fh34srj-14s-0.5sh(50) 580-1252-8 50 14 6.5 8.1 8.9 7.5 fh34srj-16s-0.5sh(50) 580-1259-7 50 16 7.5 9.1 9.9 8.5 fh34srj-18s-0.5sh(50) 580-1248-0 50 18 8.5 10.1 10.9 9.5 fh34srj-20s-0.5sh(50) 580-1256-9 50 20 9.5 11.1 11.9 10.5 fh34srj-22s-0.5sh(50) 580-1254-3 50 22 10.5 12.1 12.9 11.5 fh34srj-24s-0.5sh(50) 580-1255-6 50 24 11.5 13.1 13.9 12.5 fh34srj-26s-0.5sh(50) 580-1247-8 50 26 12.5 14.1 14.9 13.5 fh34srj-30s-0.5sh(50) 580-1232-0 50 30 14.5 16.1 16.9 15.5 fh34srj-34s-0.5sh(50) 580-1261-9 50 34 16.5 18.1 18.9 17.5 fh34srj-40s-0.5sh(50) 580-1260-6 50 40 19.5 21.1 21.9 20.5 fh34srj-45s-0.5sh(50) 580-1265-0 50 45 22 23.6 24.4 23 fh34srj-50s-0.5sh(50) 580-1266-2 50 50 24.5 26.1 26.9 25.5 nx contact no.1(top contact) (uncovered area) b 0.50.07 g0.05 0.50.07 r0.20.1 0.5 0.30.03 0.30.03 0.03 z z contact no.1(bottom contact) 1.50.3 2.50.3 (stiffener) p nx pcb mounting pattern image 0.250.03 0.650.03 3.30.03 0.80.03 e0.03 f0.03 0.5 b y y 0.03 recommended stencil pattern (recommended stencil thickness : t=0.1mm) note 1 : dimension p shall be 0.5mm min. note 2 : the recommended fpc pattern above has been designed only for fh34srj series. when using the fpc for fh19sc series (lower contact), uncoverd area shall be 2.50.3mm and stiffener shall be 3.5mm min. /? recommended pcb mounting pattern and metal mask dimensions y fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 5 /? recommended fpc construction 1. using single-sided fpc fpc : flexible printed circuit fpc : flexible printed circuit material name material material thickness (m) 2. using double-sided fpc 1. this specification is a recommendation for the construction of the fh34srj series fpc and ffc (t=0.3 0.03). 2. for details about the construction, please contact the fpc/ffc manufacturers. * to prevent release of the fpc due to its bending, use of the double sided fpc with copper foil on the back side is not recommended. covering film layer cover adhesive polyimide 1 mil thick 25 25 material name material material thickness (m) 3. using ffc ffc : flexible flat cable * tolerance of 20m. material name material material thickness (m) ? contact fpc manufacturer for specific details. surface treatment 0.2m thick gold plated over 1 to 5m thick nickel underplating 3 copper foil base adhesive base film reinforcement material adhesive stiffener cu 1oz thermosetting adhesive polyimide 1 mil thick thermosetting adhesive polyimide 7 mil thick 35 25 25 35 175 total 298 polyester film adhesive thermoplastic polyester (12) (30) 35 30 12 30 188 295 gold plated annealed copper foil adhesive polyester adhesive stiffener polyester polyester polyester total (25) (25) covering layer film cover adhesive polyimide 1 mil thick surface treatment 0.2m thick gold plated over 1 to 5m thick nickel underplating 3 through-hole copper copper foil base adhesive base film base adhesive cu cu 1/2oz thermosetting adhesive polyimide 1 mil thick 15 18 18 25 18 copper foil cover adhesive covering film layer reinforcement material adhesive stiffener cu 1/2oz thermosetting adhesive polyimide 1 mil thick thermosetting adhesive polyimide 4 mil thick (18) 25 25 50 100 total 297 fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 6 400mm min(leader) 100mm min (empty) 1600mm min (trailer ~ empty) embossed carrier tape top cover tape direction of unreeling (l : inside) ?13 (m : outside) ?380 ?80 24mm max direction of unreeling 40.1 1.95 80.1 ?1.5 +0.1 0 1.750.1 j0.1 h0.3 2 0.3 32mm min 40.1 80.1 ?1.5 +0.1 0 1.7 +0.15 0 2 0.3 1.95 1.750.1 j0.1 k0.1 h0.3 direction of unreeling 1.5 +0.1 0 /? packaging specification ? reel dimensions ? embossed carrier tape dimensions (tape width 24mm max.) ? embossed carrier tape dimensions (tape width 32mm min.) unit : mm part no. hrs no. no. of contacts hjklm fh34srj-4s-0.5sh(50) 580-1238-7 50 4 16 7.5 ? 17.4 21.4 fh34srj-5s-0.5sh(50) 580-1264-7 50 5 ? fh34srj-6s-0.5sh(50) 580-1236-1 50 6 ? fh34srj-7s-0.5sh(50) 580-1200-0 50 7 ? fh34srj-8s-0.5sh(50) 580-1231-8 50 8 ? fh34srj-9s-0.5sh(50) 580-1262-1 50 9 ? fh34srj-10s-0.5sh(50) 580-1251-5 50 10 ? fh34srj-11s-0.5sh(50) 580-1258-4 50 11 ? fh34srj-12s-0.5sh(50) 580-1253-0 50 12 24 11.5 ? 25.4 29.4 fh34srj-14s-0.5sh(50) 580-1252-8 50 14 ? fh34srj-16s-0.5sh(50) 580-1259-7 50 16 ? fh34srj-18s-0.5sh(50) 580-1248-0 50 18 ? fh34srj-20s-0.5sh(50) 580-1256-9 50 20 ? fh34srj-22s-0.5sh(50) 580-1254-3 50 22 ? fh34srj-24s-0.5sh(50) 580-1255-6 50 24 ? fh34srj-26s-0.5sh(50) 580-1247-8 50 26 ? fh34srj-30s-0.5sh(50) 580-1232-0 50 30 32 14.2 28.4 33.4 37.4 fh34srj-34s-0.5sh(50) 580-1261-9 50 34 fh34srj-40s-0.5sh(50) 580-1260-6 50 40 44 20.2 40.4 45.4 49.4 fh34srj-45s-0.5sh(50) 580-1265-0 50 45 fh34srj-50s-0.5sh(50) 580-1266-2 50 50 fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 7 max 250? start temperature(?) time (seconds) 25? (60 sec.) (60 sec.) 90 to 120 sec. preheating soldering 0 50 100 150 150? 200? 230? 200 250 hrs test condition solder method : reflow, ir/hot air environment : room air solder composition : paste, 96.5%sn/3.0%ag/0.5%cu (senju metal industry, co., ltd.'s part number: m705-221cm5-42-10.5) test board : glass epoxy 18.3mm32.85mm0.8mm thick land dimensions : 0.3mm0.8mm metal mask : 0.250.650.1mm thick the temperature profiles shown are based on the above conditions. in individual applications the actual temperature may vary, depending on solder paste type, volume / thickness and board size / thickness. consult your solder paste and equipment manufacturer for specific recommendations. /? temperature profile fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 8 actuator open actuator close pcb pcb fpc fpc /? operation and precautions operation 1. as delivered 2. fpc/ffc insertion 3. fpc/ffc insertion (the top contact specification) delivered with the actuator open. there is no need to operate the actuator prior to inserting the fpc/ffc. | precautions ~ do not close the actuator without the fpc/fpc inserted. be sure that the fpc is parallel to the surface of the pcb, then completely insert into the connector. | caution ~ do not attempt to insert the fpc if actuator is closed. ~ if the actuator is closed and if the fpc is twisted during insertion, it can cause contact deformation and / or contact failure. proper insertion skewed insertion shallow insertion ^ insert the fpc/ffc with the conductive surfaces facing up. align the fpc/ffc straight with the connector and insert it firmly all the way. caution : handle connectors carefully, as they are very small and thin. please refer to this section for verification of the following points: ^ the actuator packaged in the open condition. the actuator packaged in the open condition. boundary of fpc pattern edge of housing opening boundary of fpc pattern edge of housing opening ^ exercise care when handling connectors. follow recommendations given below. fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 9 operation do not press down on the actuator or housing do not press down on the actuator or housing lift at the center lift at the center do not rotate the actuator by the ends do not rotate the actuator by the ends flip actuator up to open flip actuator up to open do not apply force to the actuator in the direction shown when it is fully open. opening to an angle greater than 90c will break or damage the connector. do not apply force to the actuator in the direction shown when it is fully open. opening to an angle greater than 90c will break or damage the connector. lift at the center lift at the center do not rotate the actuator by the ends do not rotate the actuator by the ends . locking . fpcffc remoal lock release ^ after fpc/ffc insertion, rotate the actuator down to a full stop, pushing it at the center. ^ carefully rotate the actuator up to 90? lifting it at the center. * this connector uses a back flip type structure. the insert direction of the fpc and the actuator are different from front flip type connectors. do not to try to open the actuator from the fpc side. /? operation and precautions rotate rotate fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 10 fpc fpc stiffener film pcb pcb stiffener film component part pcb operation 6. fpc routing ^ fpc should be routed in a manner that no strain or load is exerted onto the fpc. placing any strain on the fpc may result in unintentional disconnect or damage to the fpc, which can lead to issues such as contact failure. | caution ~ do not allow the fpc or stiffener to touch the casings, housings or any other items. ~ when routing the fpc, make sure that no strain or load is applied to the connector in a pulling, pushing or side-to-side motion. additionally, make sure that no excessive upward or downward force is applied to the connector. ~ when routing the fpc, make sure that there is a stress free path for the fpc and the stiffener is parallel to the pcb. observe correct bend radiuses. ~ do not place or mount any parts that will interfere with the fpc routing. /? operation and precautions e fpc routing . fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 11 /? operation and precautions precautions when mounting connectors on the pcb s handling before mounting on pcb y insertion of the fpc/ffc or operation of the actuator prior to mounting on the pcb is not recommended. s pc board warpage minimize the warpage as much as possible. the connecto r are straight within 0.1 mm max. make sure that the mounting area flatness can accept the connector terminals without caus ing any failure of the solder joints. s forces on the board s when braking the large pc board into individual boards exercise care not to damage the installed connectors. s when attaching the boards or other components with the screws make sure that any stresses will not cause board deflections affecting the mounting areas of the connector. s when hand soldering: ?do not perform hand soldering with the fpc inserted in the connector. * do not apply excessive heat or touch the soldering iron anywhere other than the connector leads. * do not use excessive amount of solder or flux compounds. operation of the actuator or contacts may be affected by excessive amounts of solder or flux compounds. connectors pcb fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 12 the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 05/2017. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? usa: hirose electric (u.s.a.), inc. san jose office 2841 junction ave, suite 200 san jose, ca. 95134 phone : +1-408-253-9640 fax : +1-408-253-9641 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. detroit office (automotive) 17197 n. laurel park drive, suite 253, livonia, mi 48152 phone : +1-734-542-9963 fax : +1-734-542-9964 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. boston office 300 brickstone square suite 201, andover, ma 01810 phone : +1-978-662-5255 usa: hirose electric (u.s.a.), inc. headquarters chicago office 2300 warrenville road, suite 150, downers grove, il 60515 phone : +1-630-282-6700 http://www.hirose.com/us/ china: hirose electric technologies (shenzhen) co., ltd. room 09-13, 19/f, office tower shun hing square, di wang commercial centre, 5002 shen nan dong road, shenzhen city, guangdong province, 518008 phone : +86-755-8207-0851 fax : +86-755-8207-0873 http://www.hirose.com/cn/ korea: hirose korea co.,ltd. 250, huimanggongwon-ro, siheung-si, gyeonggi-do, korea, 15083 phone : +82-31-496-7000 or 7124 fax : +82-31-496-7100 http://www.hirose.co.kr/ germany: hirose electric europe b.v. nuremberg office neumeyerstrasse 22-26, 90411 nurnberg phone : +49-911 32 68 89 63 fax : +49-911 32 68 89 69 http://www.hirose.com/eu/ germany: hirose electric europe b.v. hanover office bayernstr. 3, haus c 30855 langenhagen, germany phone : +49-511 97 82 61 30 fax : +49-511 97 82 61 35 http://www.hirose.com/eu/ germany: hirose electric europe b.v. german branch schoenbergstr. 20, 73760 ostfildern phone : +49-711-456002-1 fax : +49-711-456002-299 http://www.hirose.com/eu/ france: hirose electric europe b.v. paris office regus la garenne colombes,place de la belgique, 71 boulevard national la garenne colombes, 92250, france phone : +33 (0) 1 7082 3170 fax : +33 (1) 7082 3101 http://www.hirose.com/eu/ the netherlands: hirose electric europe b.v. hogehillweg #8 1101 cc amsterdam z-o phone : +31-20-6557460 fax : +31-20-6557469 http://www.hirose.com/eu/ united kingdom: hirose electric europe bv (uk branch) 4 newton court, kelvin drive, knowlhill, milton keynes, mk5 8nh phone : +44-1908 202050 fax : +44-1908 202058 http://www.hirose.com/eu/ china: hirose electric (shanghai) co., ltd. 18, enterprise center tower 2, 209# gong he road, jing?an district, shanghai, china 200070 phone : +86-21-6391-3355 fax : +86-21-6391-3335 http://www.hirose.com/cn/ china: hirose electric (shanghai) co.,ltd. beijing branch a1001, ocean international center, building 56# east 4th ring middle road, chaoyang district, beijing, 100025 phone : +86-10-5165-9332 fax : +86-10-5908-1381 http://www.hirose.com/cn/ taiwan: hirose electric taiwan co., ltd. 103 8f, no.87, zhengzhou rd., taipei phone : +886-2-2555-7377 fax : +886-2-2555-7350 http://www.hirose.com/tw/ hong kong: hirose electric hongkong trading co., ltd. room 1001, west wing, tsim sha tsui centre, 66 mody road, tsim sha tsui east, kowloon, hong kong phone : +852-2803-5338 fax : +852-2591-6560 http://www.hirose.com/hk/ india: hirose electric singapore pte. ltd. delhi liaison office office no.552, regus-green bo ulevard, level5, tower c, sec62, plot b-9a, block b, noida, 201301, uttar pradesh, india phone : +91-12-660-8018 fax : +91-120-4804949 http://www.hirose.com/sg/ singapore: hirose electric singapore pte. ltd. 10 anson road #26-16, international plaza 079903, singapore phone : +65-6324-6113 fax : + 65-6324-6123 http://www.hirose.com/sg/ india: hirose electric singapore pte. ltd. bangalore liaison office unit no-403, 4th floor, no-84, barton centre, mahatma gandhi (mg) road, bangalore 560 001, karnataka, india phone : +91-80-4120 1907 fax : +91-80-4120 9908 http://www.hirose.com/sg/ malaysia: penang representative office 1-21-01, suntech @ penang cybercity (1164), lintang mayang pasir 3,11950, bayan baru, penang, malaysia. phone : +604-619-2564 fax : +604-619-2574 http://www.hirose.com/sg/ thailand: bangkok office (representative office) unit 4703, 47th fl., 1 empire tower, south sathorn road, yannawa, sathorn, bangkok 10120 thailand phone : +66-2-686-1255 fax : +66-2-686-3433 http://www.hirose.com/sg/
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. 1 2017.5 ? 5pq#puupndpoubdujnqspwftuifeftjhoqfyjcjmjuz 5bqfstpobmmjoofsxbmmt product length : l=0.5(n-1)+2.5 *n : number of positions depth : 3.8mm height : 1.0mm ? fh34srj differential impedance yqtsjtfujnf ? ? top/bottom contact ? smooth fpc / ffc insertion 5(35%5; 5jnf ot
dpoofdups '1$ 4 4qfd features 1. low-profile with the 1.0mm above the board and width of 3.8mm the connectors are used in space saving applications. 2. increased fpc/ffc retention as compared with existing similar construction connectors : * in horizontal direction : approximately 2.6 times higher * in vertical direction : approximately 2 times higher 3. unique back-flip rotating actuator the rotating actuator opens from the back of the connector, assuring reliable electrical and mechanical connection. 4. easy fpc insertion and reliable electrical connection proven flip lock actuator allows easy insertion of fpc and provides a tactile sensation when fully closed, confirming complete electrical and mechanical connection. 5. delivered with the actuator open fpc/fpc can be immediately inserted without the need for the opening of the actuator. 6. accepts standard fpc thickness 0.3mm thick standard flexible printed circuit (fpc) can be used. this is the only ultra-low profile zif connector using standard fpc. 7. conductive traces on the pcb can run under the connector no exposed contacts on the bottom of the connector. 8.halogen-free * *as defined by iec61249-2-21 br-900ppm maximum, cl-900ppm maximum, cl + br combined-1,500ppm maximum 9. board placement with automatic equipment flat upper surface and tape and reel packaging facilitate vacuum pick-up and placement. standard reel packaging contains 5000 connectors. fig.1 fig.2 fig.3 fig.4 ? 3.8mm depth 0.5mm pitch, 1.0mm above the board top and top/bottom contact, back-flip actuator flexible printed circuit & flexible flat cable zif connectors fh34srj series in cases where the application will demand a high level of reliability, such as automotive, please contact a company representative for further information. fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 2 product specifications ratings current rating 0.5a (note 1) voltage rating 50vrms ac operating temperature range : -55 to +85? (note 2) operating humidity range : relative humidity 90% max. (no condensation) storage temperature range : -10 to +50? (note 3) storage humidity range : relative humidity 90% max. (no condensation) recommended fpc/ffc thickness : 0.3 ?0.03 mm, gold plated contact pads item specification conditions 1. insulation resistance 500m?min. 100v dc 2. withstanding voltage no flashover or insulation breakdown 250vrms ac / 1 minute 3. contact resistance 100m?max. * including fpc and ffc conductor resistance 1ma, ac / dc 20mv max (ac : 1khz) 4. durability contact resistance : 100m?max. no damage, cracks, or parts dislocation 20cycles 5. vibration no electrical discontinuity of 1? or longer contact resistance : 100m?max. no damage, cracks, or parts dislocation frequency : 10 to 55 hz, single amplitude of 0.75 mm, 10 cycles in each of the 3 axis 6. shock no electrical discontinuity of 1? or longer contact resistance : 100m?max. no damage, cracks, or parts dislocation acceleration of 981m/s 2 , 6 ms duration, sine half- wave, 3 cycles in each of the 3 axis 7. humidity (steady state) contact resistance : 100m?max. insulation resistance : 50m?min. no damage, cracks, or parts dislocation 96 hours at 40? and humidity of 90 to 95% 8. temperature cycle contact resistance : 100m?max. insulation resistance : 50m?min. no damage, cracks, or parts dislocation temperature : -55? / +15? to +35? / +85? / +15? to +35? time: 30 / 2 to 3 / 30 / 2 to 3 minutes 5 cycles 9. resistance to soldering heat no deformation of components affecting performance reflow : at the recommended temperature profile manual soldering: 350? ?0? for 5 seconds (note 3) note1 : when passing the current through all of the contacts, use 70% of the rated current. note2 : includes temperature rise caused by current flow. note3 : the term "storage" refers to products stored for a long period prior to mounting and use. the operating temperature and humidity range covers the non-conducting condition of installed connectors in storage, shipment or during transportation after board mounting. materials / finish part material finish remarks insulator lcp color : gray ul94v-0 pa color : black lcp(8pos.) contacts phosphor bronze gold plating with nickel barrier ??? metalfittings phosphor bronze pure tin reflow plating ??? product number structure refer to the chart below when determining the product specifications from the product number. please select from the product numbers listed in this catalog when placing orders. fh 34s rj ? 30s ? 0.5 sh ( 50 ) ^ _ ` a b c d ^ series name : fh b contact pitch : 0.5mm _ series no. : 34s c termination type sh : smt horizontal mounting type ` rj top and bottom contact, halogen-free (flame retardance ul94v-0). d specifications (50)? standard product 5,000 pcs/reel (99)? 500 pcs/reel a number of contacts : 4 to 50 fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 3 number of contacts contact no.1 polarization mark cav no. number of contacts indicator hrs mark lot no. connector dimensions unit : mm part no. hrs no. no. of contacts abcd fh34srj-4s-0.5sh(50) 580-1238-7 50 4 4 1.5 2.53 3.38 fh34srj-5s-0.5sh(50) 580-1264-7 50 5 4.5 2 3.03 3.88 fh34srj-6s-0.5sh(50) 580-1236-1 50 6 5 2.5 3.53 4.38 fh34srj-7s-0.5sh(50) 580-1200-0 50 7 5.5 3 4.03 4.88 fh34srj-8s-0.5sh(50) 580-1231-8 50 8 6 3.5 4.53 5.38 fh34srj-9s-0.5sh(50) 580-1262-1 50 9 6.5 4 5.03 5.88 fh34srj-10s-0.5sh(50) 580-1251-5 50 10 7 4.5 5.53 6.38 fh34srj-11s-0.5sh(50) 580-1258-4 50 11 7.5 5 6.03 6.88 fh34srj-12s-0.5sh(50) 580-1253-0 50 12 8 5.5 6.53 7.38 fh34srj-14s-0.5sh(50) 580-1252-8 50 14 9 6.5 7.53 8.38 fh34srj-16s-0.5sh(50) 580-1259-7 50 16 10 7.5 8.57 9.38 fh34srj-18s-0.5sh(50) 580-1248-0 50 18 11 8.5 9.57 10.38 fh34srj-20s-0.5sh(50) 580-1256-9 50 20 12 9.5 10.57 11.38 fh34srj-22s-0.5sh(50) 580-1254-3 50 22 13 10.5 11.57 12.38 fh34srj-24s-0.5sh(50) 580-1255-6 50 24 14 11.5 12.57 13.38 fh34srj-26s-0.5sh(50) 580-1247-8 50 26 15 12.5 13.57 14.38 fh34srj-30s-0.5sh(50) 580-1232-0 50 30 17 14.5 15.57 16.38 fh34srj-34s-0.5sh(50) 580-1261-9 50 34 19 16.5 17.53 18.38 fh34srj-40s-0.5sh(50) 580-1260-6 50 40 22 19.5 20.53 21.38 fh34srj-45s-0.5sh(50) 580-1265-0 50 45 24.5 22 23.03 23.88 fh34srj-50s-0.5sh(50) 580-1266-2 50 50 27 24.5 25.53 26.38 tape and reel packaging. order by number of reels.

note 1 : the coplanarity of each terminal lead within specified dimension is 0.1mm max. note 2 : packaged on tape and reel only. check packaging specification. note 3 : slight variations in color of the plastic compounds do not affect form, fit or function of the connector. note 4 : after reflow, the terminal plating may change color, however this does not represent a quality issue. fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 4 recommended pcb mounting pattern b x 0.30.05 0.065 nx x 0.1 contact no.1 connector image : underside 0.25 0.25 2.9 0.15 0.15 0.185 0.5 e0.1 0.80.05 0.80.05 3.30.05 f0.1 /? recommended fpc/ffc dimensions unit : mm part no. hrs no. no. of contacts befg fh34srj-4s-0.5sh(50) 580-1238-7 50 4 1.5 3.1 3.9 2.5 fh34srj-5s-0.5sh(50) 580-1264-7 50 5 2 3.6 4.4 3 fh34srj-6s-0.5sh(50) 580-1236-1 50 6 2.5 4.1 4.9 3.5 fh34srj-7s-0.5sh(50) 580-1200-0 50 7 3 4.6 5.4 4 fh34srj-8s-0.5sh(50) 580-1231-8 50 8 3.5 5.1 5.9 4.5 fh34srj-9s-0.5sh(50) 580-1262-1 50 9 4 5.6 6.4 5 fh34srj-10s-0.5sh(50) 580-1251-5 50 10 4.5 6.1 6.9 5.5 fh34srj-11s-0.5sh(50) 580-1258-4 50 11 5 6.6 7.4 6 fh34srj-12s-0.5sh(50) 580-1253-0 50 12 5.5 7.1 7.9 6.5 fh34srj-14s-0.5sh(50) 580-1252-8 50 14 6.5 8.1 8.9 7.5 fh34srj-16s-0.5sh(50) 580-1259-7 50 16 7.5 9.1 9.9 8.5 fh34srj-18s-0.5sh(50) 580-1248-0 50 18 8.5 10.1 10.9 9.5 fh34srj-20s-0.5sh(50) 580-1256-9 50 20 9.5 11.1 11.9 10.5 fh34srj-22s-0.5sh(50) 580-1254-3 50 22 10.5 12.1 12.9 11.5 fh34srj-24s-0.5sh(50) 580-1255-6 50 24 11.5 13.1 13.9 12.5 fh34srj-26s-0.5sh(50) 580-1247-8 50 26 12.5 14.1 14.9 13.5 fh34srj-30s-0.5sh(50) 580-1232-0 50 30 14.5 16.1 16.9 15.5 fh34srj-34s-0.5sh(50) 580-1261-9 50 34 16.5 18.1 18.9 17.5 fh34srj-40s-0.5sh(50) 580-1260-6 50 40 19.5 21.1 21.9 20.5 fh34srj-45s-0.5sh(50) 580-1265-0 50 45 22 23.6 24.4 23 fh34srj-50s-0.5sh(50) 580-1266-2 50 50 24.5 26.1 26.9 25.5 nx contact no.1(top contact) (uncovered area) b 0.50.07 g0.05 0.50.07 r0.20.1 0.5 0.30.03 0.30.03 0.03 z z contact no.1(bottom contact) 1.50.3 2.50.3 (stiffener) p nx pcb mounting pattern image 0.250.03 0.650.03 3.30.03 0.80.03 e0.03 f0.03 0.5 b y y 0.03 recommended stencil pattern (recommended stencil thickness : t=0.1mm) note 1 : dimension p shall be 0.5mm min. note 2 : the recommended fpc pattern above has been designed only for fh34srj series. when using the fpc for fh19sc series (lower contact), uncoverd area shall be 2.50.3mm and stiffener shall be 3.5mm min. /? recommended pcb mounting pattern and metal mask dimensions y fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 5 /? recommended fpc construction 1. using single-sided fpc fpc : flexible printed circuit fpc : flexible printed circuit material name material material thickness (m) 2. using double-sided fpc 1. this specification is a recommendation for the construction of the fh34srj series fpc and ffc (t=0.3 0.03). 2. for details about the construction, please contact the fpc/ffc manufacturers. * to prevent release of the fpc due to its bending, use of the double sided fpc with copper foil on the back side is not recommended. covering film layer cover adhesive polyimide 1 mil thick 25 25 material name material material thickness (m) 3. using ffc ffc : flexible flat cable * tolerance of 20m. material name material material thickness (m) ? contact fpc manufacturer for specific details. surface treatment 0.2m thick gold plated over 1 to 5m thick nickel underplating 3 copper foil base adhesive base film reinforcement material adhesive stiffener cu 1oz thermosetting adhesive polyimide 1 mil thick thermosetting adhesive polyimide 7 mil thick 35 25 25 35 175 total 298 polyester film adhesive thermoplastic polyester (12) (30) 35 30 12 30 188 295 gold plated annealed copper foil adhesive polyester adhesive stiffener polyester polyester polyester total (25) (25) covering layer film cover adhesive polyimide 1 mil thick surface treatment 0.2m thick gold plated over 1 to 5m thick nickel underplating 3 through-hole copper copper foil base adhesive base film base adhesive cu cu 1/2oz thermosetting adhesive polyimide 1 mil thick 15 18 18 25 18 copper foil cover adhesive covering film layer reinforcement material adhesive stiffener cu 1/2oz thermosetting adhesive polyimide 1 mil thick thermosetting adhesive polyimide 4 mil thick (18) 25 25 50 100 total 297 fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 6 400mm min(leader) 100mm min (empty) 1600mm min (trailer ~ empty) embossed carrier tape top cover tape direction of unreeling (l : inside) ?13 (m : outside) ?380 ?80 24mm max direction of unreeling 40.1 1.95 80.1 ?1.5 +0.1 0 1.750.1 j0.1 h0.3 2 0.3 32mm min 40.1 80.1 ?1.5 +0.1 0 1.7 +0.15 0 2 0.3 1.95 1.750.1 j0.1 k0.1 h0.3 direction of unreeling 1.5 +0.1 0 /? packaging specification ? reel dimensions ? embossed carrier tape dimensions (tape width 24mm max.) ? embossed carrier tape dimensions (tape width 32mm min.) unit : mm part no. hrs no. no. of contacts hjklm fh34srj-4s-0.5sh(50) 580-1238-7 50 4 16 7.5 ? 17.4 21.4 fh34srj-5s-0.5sh(50) 580-1264-7 50 5 ? fh34srj-6s-0.5sh(50) 580-1236-1 50 6 ? fh34srj-7s-0.5sh(50) 580-1200-0 50 7 ? fh34srj-8s-0.5sh(50) 580-1231-8 50 8 ? fh34srj-9s-0.5sh(50) 580-1262-1 50 9 ? fh34srj-10s-0.5sh(50) 580-1251-5 50 10 ? fh34srj-11s-0.5sh(50) 580-1258-4 50 11 ? fh34srj-12s-0.5sh(50) 580-1253-0 50 12 24 11.5 ? 25.4 29.4 fh34srj-14s-0.5sh(50) 580-1252-8 50 14 ? fh34srj-16s-0.5sh(50) 580-1259-7 50 16 ? fh34srj-18s-0.5sh(50) 580-1248-0 50 18 ? fh34srj-20s-0.5sh(50) 580-1256-9 50 20 ? fh34srj-22s-0.5sh(50) 580-1254-3 50 22 ? fh34srj-24s-0.5sh(50) 580-1255-6 50 24 ? fh34srj-26s-0.5sh(50) 580-1247-8 50 26 ? fh34srj-30s-0.5sh(50) 580-1232-0 50 30 32 14.2 28.4 33.4 37.4 fh34srj-34s-0.5sh(50) 580-1261-9 50 34 fh34srj-40s-0.5sh(50) 580-1260-6 50 40 44 20.2 40.4 45.4 49.4 fh34srj-45s-0.5sh(50) 580-1265-0 50 45 fh34srj-50s-0.5sh(50) 580-1266-2 50 50 fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 7 max 250? start temperature(?) time (seconds) 25? (60 sec.) (60 sec.) 90 to 120 sec. preheating soldering 0 50 100 150 150? 200? 230? 200 250 hrs test condition solder method : reflow, ir/hot air environment : room air solder composition : paste, 96.5%sn/3.0%ag/0.5%cu (senju metal industry, co., ltd.'s part number: m705-221cm5-42-10.5) test board : glass epoxy 18.3mm32.85mm0.8mm thick land dimensions : 0.3mm0.8mm metal mask : 0.250.650.1mm thick the temperature profiles shown are based on the above conditions. in individual applications the actual temperature may vary, depending on solder paste type, volume / thickness and board size / thickness. consult your solder paste and equipment manufacturer for specific recommendations. /? temperature profile fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 8 actuator open actuator close pcb pcb fpc fpc /? operation and precautions operation 1. as delivered 2. fpc/ffc insertion 3. fpc/ffc insertion (the top contact specification) delivered with the actuator open. there is no need to operate the actuator prior to inserting the fpc/ffc. | precautions ~ do not close the actuator without the fpc/fpc inserted. be sure that the fpc is parallel to the surface of the pcb, then completely insert into the connector. | caution ~ do not attempt to insert the fpc if actuator is closed. ~ if the actuator is closed and if the fpc is twisted during insertion, it can cause contact deformation and / or contact failure. proper insertion skewed insertion shallow insertion ^ insert the fpc/ffc with the conductive surfaces facing up. align the fpc/ffc straight with the connector and insert it firmly all the way. caution : handle connectors carefully, as they are very small and thin. please refer to this section for verification of the following points: ^ the actuator packaged in the open condition. the actuator packaged in the open condition. boundary of fpc pattern edge of housing opening boundary of fpc pattern edge of housing opening ^ exercise care when handling connectors. follow recommendations given below. fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 9 operation do not press down on the actuator or housing do not press down on the actuator or housing lift at the center lift at the center do not rotate the actuator by the ends do not rotate the actuator by the ends flip actuator up to open flip actuator up to open do not apply force to the actuator in the direction shown when it is fully open. opening to an angle greater than 90c will break or damage the connector. do not apply force to the actuator in the direction shown when it is fully open. opening to an angle greater than 90c will break or damage the connector. lift at the center lift at the center do not rotate the actuator by the ends do not rotate the actuator by the ends . locking . fpcffc remoal lock release ^ after fpc/ffc insertion, rotate the actuator down to a full stop, pushing it at the center. ^ carefully rotate the actuator up to 90? lifting it at the center. * this connector uses a back flip type structure. the insert direction of the fpc and the actuator are different from front flip type connectors. do not to try to open the actuator from the fpc side. /? operation and precautions rotate rotate fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 10 fpc fpc stiffener film pcb pcb stiffener film component part pcb operation 6. fpc routing ^ fpc should be routed in a manner that no strain or load is exerted onto the fpc. placing any strain on the fpc may result in unintentional disconnect or damage to the fpc, which can lead to issues such as contact failure. | caution ~ do not allow the fpc or stiffener to touch the casings, housings or any other items. ~ when routing the fpc, make sure that no strain or load is applied to the connector in a pulling, pushing or side-to-side motion. additionally, make sure that no excessive upward or downward force is applied to the connector. ~ when routing the fpc, make sure that there is a stress free path for the fpc and the stiffener is parallel to the pcb. observe correct bend radiuses. ~ do not place or mount any parts that will interfere with the fpc routing. /? operation and precautions e fpc routing . fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 11 /? operation and precautions precautions when mounting connectors on the pcb s handling before mounting on pcb y insertion of the fpc/ffc or operation of the actuator prior to mounting on the pcb is not recommended. s pc board warpage minimize the warpage as much as possible. the connecto r are straight within 0.1 mm max. make sure that the mounting area flatness can accept the connector terminals without caus ing any failure of the solder joints. s forces on the board s when braking the large pc board into individual boards exercise care not to damage the installed connectors. s when attaching the boards or other components with the screws make sure that any stresses will not cause board deflections affecting the mounting areas of the connector. s when hand soldering: ?do not perform hand soldering with the fpc inserted in the connector. * do not apply excessive heat or touch the soldering iron anywhere other than the connector leads. * do not use excessive amount of solder or flux compounds. operation of the actuator or contacts may be affected by excessive amounts of solder or flux compounds. connectors pcb fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 12 the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 05/2017. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? usa: hirose electric (u.s.a.), inc. san jose office 2841 junction ave, suite 200 san jose, ca. 95134 phone : +1-408-253-9640 fax : +1-408-253-9641 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. detroit office (automotive) 17197 n. laurel park drive, suite 253, livonia, mi 48152 phone : +1-734-542-9963 fax : +1-734-542-9964 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. boston office 300 brickstone square suite 201, andover, ma 01810 phone : +1-978-662-5255 usa: hirose electric (u.s.a.), inc. headquarters chicago office 2300 warrenville road, suite 150, downers grove, il 60515 phone : +1-630-282-6700 http://www.hirose.com/us/ china: hirose electric technologies (shenzhen) co., ltd. room 09-13, 19/f, office tower shun hing square, di wang commercial centre, 5002 shen nan dong road, shenzhen city, guangdong province, 518008 phone : +86-755-8207-0851 fax : +86-755-8207-0873 http://www.hirose.com/cn/ korea: hirose korea co.,ltd. 250, huimanggongwon-ro, siheung-si, gyeonggi-do, korea, 15083 phone : +82-31-496-7000 or 7124 fax : +82-31-496-7100 http://www.hirose.co.kr/ germany: hirose electric europe b.v. nuremberg office neumeyerstrasse 22-26, 90411 nurnberg phone : +49-911 32 68 89 63 fax : +49-911 32 68 89 69 http://www.hirose.com/eu/ germany: hirose electric europe b.v. hanover office bayernstr. 3, haus c 30855 langenhagen, germany phone : +49-511 97 82 61 30 fax : +49-511 97 82 61 35 http://www.hirose.com/eu/ germany: hirose electric europe b.v. german branch schoenbergstr. 20, 73760 ostfildern phone : +49-711-456002-1 fax : +49-711-456002-299 http://www.hirose.com/eu/ france: hirose electric europe b.v. paris office regus la garenne colombes,place de la belgique, 71 boulevard national la garenne colombes, 92250, france phone : +33 (0) 1 7082 3170 fax : +33 (1) 7082 3101 http://www.hirose.com/eu/ the netherlands: hirose electric europe b.v. hogehillweg #8 1101 cc amsterdam z-o phone : +31-20-6557460 fax : +31-20-6557469 http://www.hirose.com/eu/ united kingdom: hirose electric europe bv (uk branch) 4 newton court, kelvin drive, knowlhill, milton keynes, mk5 8nh phone : +44-1908 202050 fax : +44-1908 202058 http://www.hirose.com/eu/ china: hirose electric (shanghai) co., ltd. 18, enterprise center tower 2, 209# gong he road, jing?an district, shanghai, china 200070 phone : +86-21-6391-3355 fax : +86-21-6391-3335 http://www.hirose.com/cn/ china: hirose electric (shanghai) co.,ltd. beijing branch a1001, ocean international center, building 56# east 4th ring middle road, chaoyang district, beijing, 100025 phone : +86-10-5165-9332 fax : +86-10-5908-1381 http://www.hirose.com/cn/ taiwan: hirose electric taiwan co., ltd. 103 8f, no.87, zhengzhou rd., taipei phone : +886-2-2555-7377 fax : +886-2-2555-7350 http://www.hirose.com/tw/ hong kong: hirose electric hongkong trading co., ltd. room 1001, west wing, tsim sha tsui centre, 66 mody road, tsim sha tsui east, kowloon, hong kong phone : +852-2803-5338 fax : +852-2591-6560 http://www.hirose.com/hk/ india: hirose electric singapore pte. ltd. delhi liaison office office no.552, regus-green bo ulevard, level5, tower c, sec62, plot b-9a, block b, noida, 201301, uttar pradesh, india phone : +91-12-660-8018 fax : +91-120-4804949 http://www.hirose.com/sg/ singapore: hirose electric singapore pte. ltd. 10 anson road #26-16, international plaza 079903, singapore phone : +65-6324-6113 fax : + 65-6324-6123 http://www.hirose.com/sg/ india: hirose electric singapore pte. ltd. bangalore liaison office unit no-403, 4th floor, no-84, barton centre, mahatma gandhi (mg) road, bangalore 560 001, karnataka, india phone : +91-80-4120 1907 fax : +91-80-4120 9908 http://www.hirose.com/sg/ malaysia: penang representative office 1-21-01, suntech @ penang cybercity (1164), lintang mayang pasir 3,11950, bayan baru, penang, malaysia. phone : +604-619-2564 fax : +604-619-2574 http://www.hirose.com/sg/ thailand: bangkok office (representative office) unit 4703, 47th fl., 1 empire tower, south sathorn road, yannawa, sathorn, bangkok 10120 thailand phone : +66-2-686-1255 fax : +66-2-686-3433 http://www.hirose.com/sg/
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. 1 2017.5 ? 5pq#puupndpoubdujnqspwftuifeftjhoqfyjcjmjuz 5bqfstpobmmjoofsxbmmt product length : l=0.5(n-1)+2.5 *n : number of positions depth : 3.8mm height : 1.0mm ? fh34srj differential impedance yqtsjtfujnf ? ? top/bottom contact ? smooth fpc / ffc insertion 5(35%5; 5jnf ot
dpoofdups '1$ 4 4qfd features 1. low-profile with the 1.0mm above the board and width of 3.8mm the connectors are used in space saving applications. 2. increased fpc/ffc retention as compared with existing similar construction connectors : * in horizontal direction : approximately 2.6 times higher * in vertical direction : approximately 2 times higher 3. unique back-flip rotating actuator the rotating actuator opens from the back of the connector, assuring reliable electrical and mechanical connection. 4. easy fpc insertion and reliable electrical connection proven flip lock actuator allows easy insertion of fpc and provides a tactile sensation when fully closed, confirming complete electrical and mechanical connection. 5. delivered with the actuator open fpc/fpc can be immediately inserted without the need for the opening of the actuator. 6. accepts standard fpc thickness 0.3mm thick standard flexible printed circuit (fpc) can be used. this is the only ultra-low profile zif connector using standard fpc. 7. conductive traces on the pcb can run under the connector no exposed contacts on the bottom of the connector. 8.halogen-free * *as defined by iec61249-2-21 br-900ppm maximum, cl-900ppm maximum, cl + br combined-1,500ppm maximum 9. board placement with automatic equipment flat upper surface and tape and reel packaging facilitate vacuum pick-up and placement. standard reel packaging contains 5000 connectors. fig.1 fig.2 fig.3 fig.4 ? 3.8mm depth 0.5mm pitch, 1.0mm above the board top and top/bottom contact, back-flip actuator flexible printed circuit & flexible flat cable zif connectors fh34srj series in cases where the application will demand a high level of reliability, such as automotive, please contact a company representative for further information. fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 2 product specifications ratings current rating 0.5a (note 1) voltage rating 50vrms ac operating temperature range : -55 to +85? (note 2) operating humidity range : relative humidity 90% max. (no condensation) storage temperature range : -10 to +50? (note 3) storage humidity range : relative humidity 90% max. (no condensation) recommended fpc/ffc thickness : 0.3 ?0.03 mm, gold plated contact pads item specification conditions 1. insulation resistance 500m?min. 100v dc 2. withstanding voltage no flashover or insulation breakdown 250vrms ac / 1 minute 3. contact resistance 100m?max. * including fpc and ffc conductor resistance 1ma, ac / dc 20mv max (ac : 1khz) 4. durability contact resistance : 100m?max. no damage, cracks, or parts dislocation 20cycles 5. vibration no electrical discontinuity of 1? or longer contact resistance : 100m?max. no damage, cracks, or parts dislocation frequency : 10 to 55 hz, single amplitude of 0.75 mm, 10 cycles in each of the 3 axis 6. shock no electrical discontinuity of 1? or longer contact resistance : 100m?max. no damage, cracks, or parts dislocation acceleration of 981m/s 2 , 6 ms duration, sine half- wave, 3 cycles in each of the 3 axis 7. humidity (steady state) contact resistance : 100m?max. insulation resistance : 50m?min. no damage, cracks, or parts dislocation 96 hours at 40? and humidity of 90 to 95% 8. temperature cycle contact resistance : 100m?max. insulation resistance : 50m?min. no damage, cracks, or parts dislocation temperature : -55? / +15? to +35? / +85? / +15? to +35? time: 30 / 2 to 3 / 30 / 2 to 3 minutes 5 cycles 9. resistance to soldering heat no deformation of components affecting performance reflow : at the recommended temperature profile manual soldering: 350? ?0? for 5 seconds (note 3) note1 : when passing the current through all of the contacts, use 70% of the rated current. note2 : includes temperature rise caused by current flow. note3 : the term "storage" refers to products stored for a long period prior to mounting and use. the operating temperature and humidity range covers the non-conducting condition of installed connectors in storage, shipment or during transportation after board mounting. materials / finish part material finish remarks insulator lcp color : gray ul94v-0 pa color : black lcp(8pos.) contacts phosphor bronze gold plating with nickel barrier ??? metalfittings phosphor bronze pure tin reflow plating ??? product number structure refer to the chart below when determining the product specifications from the product number. please select from the product numbers listed in this catalog when placing orders. fh 34s rj ? 30s ? 0.5 sh ( 50 ) ^ _ ` a b c d ^ series name : fh b contact pitch : 0.5mm _ series no. : 34s c termination type sh : smt horizontal mounting type ` rj top and bottom contact, halogen-free (flame retardance ul94v-0). d specifications (50)? standard product 5,000 pcs/reel (99)? 500 pcs/reel a number of contacts : 4 to 50 fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 3 number of contacts contact no.1 polarization mark cav no. number of contacts indicator hrs mark lot no. connector dimensions unit : mm part no. hrs no. no. of contacts abcd fh34srj-4s-0.5sh(50) 580-1238-7 50 4 4 1.5 2.53 3.38 fh34srj-5s-0.5sh(50) 580-1264-7 50 5 4.5 2 3.03 3.88 fh34srj-6s-0.5sh(50) 580-1236-1 50 6 5 2.5 3.53 4.38 fh34srj-7s-0.5sh(50) 580-1200-0 50 7 5.5 3 4.03 4.88 fh34srj-8s-0.5sh(50) 580-1231-8 50 8 6 3.5 4.53 5.38 fh34srj-9s-0.5sh(50) 580-1262-1 50 9 6.5 4 5.03 5.88 fh34srj-10s-0.5sh(50) 580-1251-5 50 10 7 4.5 5.53 6.38 fh34srj-11s-0.5sh(50) 580-1258-4 50 11 7.5 5 6.03 6.88 fh34srj-12s-0.5sh(50) 580-1253-0 50 12 8 5.5 6.53 7.38 fh34srj-14s-0.5sh(50) 580-1252-8 50 14 9 6.5 7.53 8.38 fh34srj-16s-0.5sh(50) 580-1259-7 50 16 10 7.5 8.57 9.38 fh34srj-18s-0.5sh(50) 580-1248-0 50 18 11 8.5 9.57 10.38 fh34srj-20s-0.5sh(50) 580-1256-9 50 20 12 9.5 10.57 11.38 fh34srj-22s-0.5sh(50) 580-1254-3 50 22 13 10.5 11.57 12.38 fh34srj-24s-0.5sh(50) 580-1255-6 50 24 14 11.5 12.57 13.38 fh34srj-26s-0.5sh(50) 580-1247-8 50 26 15 12.5 13.57 14.38 fh34srj-30s-0.5sh(50) 580-1232-0 50 30 17 14.5 15.57 16.38 fh34srj-34s-0.5sh(50) 580-1261-9 50 34 19 16.5 17.53 18.38 fh34srj-40s-0.5sh(50) 580-1260-6 50 40 22 19.5 20.53 21.38 fh34srj-45s-0.5sh(50) 580-1265-0 50 45 24.5 22 23.03 23.88 fh34srj-50s-0.5sh(50) 580-1266-2 50 50 27 24.5 25.53 26.38 tape and reel packaging. order by number of reels.

note 1 : the coplanarity of each terminal lead within specified dimension is 0.1mm max. note 2 : packaged on tape and reel only. check packaging specification. note 3 : slight variations in color of the plastic compounds do not affect form, fit or function of the connector. note 4 : after reflow, the terminal plating may change color, however this does not represent a quality issue. fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 4 recommended pcb mounting pattern b x 0.30.05 0.065 nx x 0.1 contact no.1 connector image : underside 0.25 0.25 2.9 0.15 0.15 0.185 0.5 e0.1 0.80.05 0.80.05 3.30.05 f0.1 /? recommended fpc/ffc dimensions unit : mm part no. hrs no. no. of contacts befg fh34srj-4s-0.5sh(50) 580-1238-7 50 4 1.5 3.1 3.9 2.5 fh34srj-5s-0.5sh(50) 580-1264-7 50 5 2 3.6 4.4 3 fh34srj-6s-0.5sh(50) 580-1236-1 50 6 2.5 4.1 4.9 3.5 fh34srj-7s-0.5sh(50) 580-1200-0 50 7 3 4.6 5.4 4 fh34srj-8s-0.5sh(50) 580-1231-8 50 8 3.5 5.1 5.9 4.5 fh34srj-9s-0.5sh(50) 580-1262-1 50 9 4 5.6 6.4 5 fh34srj-10s-0.5sh(50) 580-1251-5 50 10 4.5 6.1 6.9 5.5 fh34srj-11s-0.5sh(50) 580-1258-4 50 11 5 6.6 7.4 6 fh34srj-12s-0.5sh(50) 580-1253-0 50 12 5.5 7.1 7.9 6.5 fh34srj-14s-0.5sh(50) 580-1252-8 50 14 6.5 8.1 8.9 7.5 fh34srj-16s-0.5sh(50) 580-1259-7 50 16 7.5 9.1 9.9 8.5 fh34srj-18s-0.5sh(50) 580-1248-0 50 18 8.5 10.1 10.9 9.5 fh34srj-20s-0.5sh(50) 580-1256-9 50 20 9.5 11.1 11.9 10.5 fh34srj-22s-0.5sh(50) 580-1254-3 50 22 10.5 12.1 12.9 11.5 fh34srj-24s-0.5sh(50) 580-1255-6 50 24 11.5 13.1 13.9 12.5 fh34srj-26s-0.5sh(50) 580-1247-8 50 26 12.5 14.1 14.9 13.5 fh34srj-30s-0.5sh(50) 580-1232-0 50 30 14.5 16.1 16.9 15.5 fh34srj-34s-0.5sh(50) 580-1261-9 50 34 16.5 18.1 18.9 17.5 fh34srj-40s-0.5sh(50) 580-1260-6 50 40 19.5 21.1 21.9 20.5 fh34srj-45s-0.5sh(50) 580-1265-0 50 45 22 23.6 24.4 23 fh34srj-50s-0.5sh(50) 580-1266-2 50 50 24.5 26.1 26.9 25.5 nx contact no.1(top contact) (uncovered area) b 0.50.07 g0.05 0.50.07 r0.20.1 0.5 0.30.03 0.30.03 0.03 z z contact no.1(bottom contact) 1.50.3 2.50.3 (stiffener) p nx pcb mounting pattern image 0.250.03 0.650.03 3.30.03 0.80.03 e0.03 f0.03 0.5 b y y 0.03 recommended stencil pattern (recommended stencil thickness : t=0.1mm) note 1 : dimension p shall be 0.5mm min. note 2 : the recommended fpc pattern above has been designed only for fh34srj series. when using the fpc for fh19sc series (lower contact), uncoverd area shall be 2.50.3mm and stiffener shall be 3.5mm min. /? recommended pcb mounting pattern and metal mask dimensions y fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 5 /? recommended fpc construction 1. using single-sided fpc fpc : flexible printed circuit fpc : flexible printed circuit material name material material thickness (m) 2. using double-sided fpc 1. this specification is a recommendation for the construction of the fh34srj series fpc and ffc (t=0.3 0.03). 2. for details about the construction, please contact the fpc/ffc manufacturers. * to prevent release of the fpc due to its bending, use of the double sided fpc with copper foil on the back side is not recommended. covering film layer cover adhesive polyimide 1 mil thick 25 25 material name material material thickness (m) 3. using ffc ffc : flexible flat cable * tolerance of 20m. material name material material thickness (m) ? contact fpc manufacturer for specific details. surface treatment 0.2m thick gold plated over 1 to 5m thick nickel underplating 3 copper foil base adhesive base film reinforcement material adhesive stiffener cu 1oz thermosetting adhesive polyimide 1 mil thick thermosetting adhesive polyimide 7 mil thick 35 25 25 35 175 total 298 polyester film adhesive thermoplastic polyester (12) (30) 35 30 12 30 188 295 gold plated annealed copper foil adhesive polyester adhesive stiffener polyester polyester polyester total (25) (25) covering layer film cover adhesive polyimide 1 mil thick surface treatment 0.2m thick gold plated over 1 to 5m thick nickel underplating 3 through-hole copper copper foil base adhesive base film base adhesive cu cu 1/2oz thermosetting adhesive polyimide 1 mil thick 15 18 18 25 18 copper foil cover adhesive covering film layer reinforcement material adhesive stiffener cu 1/2oz thermosetting adhesive polyimide 1 mil thick thermosetting adhesive polyimide 4 mil thick (18) 25 25 50 100 total 297 fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 6 400mm min(leader) 100mm min (empty) 1600mm min (trailer ~ empty) embossed carrier tape top cover tape direction of unreeling (l : inside) ?13 (m : outside) ?380 ?80 24mm max direction of unreeling 40.1 1.95 80.1 ?1.5 +0.1 0 1.750.1 j0.1 h0.3 2 0.3 32mm min 40.1 80.1 ?1.5 +0.1 0 1.7 +0.15 0 2 0.3 1.95 1.750.1 j0.1 k0.1 h0.3 direction of unreeling 1.5 +0.1 0 /? packaging specification ? reel dimensions ? embossed carrier tape dimensions (tape width 24mm max.) ? embossed carrier tape dimensions (tape width 32mm min.) unit : mm part no. hrs no. no. of contacts hjklm fh34srj-4s-0.5sh(50) 580-1238-7 50 4 16 7.5 ? 17.4 21.4 fh34srj-5s-0.5sh(50) 580-1264-7 50 5 ? fh34srj-6s-0.5sh(50) 580-1236-1 50 6 ? fh34srj-7s-0.5sh(50) 580-1200-0 50 7 ? fh34srj-8s-0.5sh(50) 580-1231-8 50 8 ? fh34srj-9s-0.5sh(50) 580-1262-1 50 9 ? fh34srj-10s-0.5sh(50) 580-1251-5 50 10 ? fh34srj-11s-0.5sh(50) 580-1258-4 50 11 ? fh34srj-12s-0.5sh(50) 580-1253-0 50 12 24 11.5 ? 25.4 29.4 fh34srj-14s-0.5sh(50) 580-1252-8 50 14 ? fh34srj-16s-0.5sh(50) 580-1259-7 50 16 ? fh34srj-18s-0.5sh(50) 580-1248-0 50 18 ? fh34srj-20s-0.5sh(50) 580-1256-9 50 20 ? fh34srj-22s-0.5sh(50) 580-1254-3 50 22 ? fh34srj-24s-0.5sh(50) 580-1255-6 50 24 ? fh34srj-26s-0.5sh(50) 580-1247-8 50 26 ? fh34srj-30s-0.5sh(50) 580-1232-0 50 30 32 14.2 28.4 33.4 37.4 fh34srj-34s-0.5sh(50) 580-1261-9 50 34 fh34srj-40s-0.5sh(50) 580-1260-6 50 40 44 20.2 40.4 45.4 49.4 fh34srj-45s-0.5sh(50) 580-1265-0 50 45 fh34srj-50s-0.5sh(50) 580-1266-2 50 50 fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 7 max 250? start temperature(?) time (seconds) 25? (60 sec.) (60 sec.) 90 to 120 sec. preheating soldering 0 50 100 150 150? 200? 230? 200 250 hrs test condition solder method : reflow, ir/hot air environment : room air solder composition : paste, 96.5%sn/3.0%ag/0.5%cu (senju metal industry, co., ltd.'s part number: m705-221cm5-42-10.5) test board : glass epoxy 18.3mm32.85mm0.8mm thick land dimensions : 0.3mm0.8mm metal mask : 0.250.650.1mm thick the temperature profiles shown are based on the above conditions. in individual applications the actual temperature may vary, depending on solder paste type, volume / thickness and board size / thickness. consult your solder paste and equipment manufacturer for specific recommendations. /? temperature profile fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 8 actuator open actuator close pcb pcb fpc fpc /? operation and precautions operation 1. as delivered 2. fpc/ffc insertion 3. fpc/ffc insertion (the top contact specification) delivered with the actuator open. there is no need to operate the actuator prior to inserting the fpc/ffc. | precautions ~ do not close the actuator without the fpc/fpc inserted. be sure that the fpc is parallel to the surface of the pcb, then completely insert into the connector. | caution ~ do not attempt to insert the fpc if actuator is closed. ~ if the actuator is closed and if the fpc is twisted during insertion, it can cause contact deformation and / or contact failure. proper insertion skewed insertion shallow insertion ^ insert the fpc/ffc with the conductive surfaces facing up. align the fpc/ffc straight with the connector and insert it firmly all the way. caution : handle connectors carefully, as they are very small and thin. please refer to this section for verification of the following points: ^ the actuator packaged in the open condition. the actuator packaged in the open condition. boundary of fpc pattern edge of housing opening boundary of fpc pattern edge of housing opening ^ exercise care when handling connectors. follow recommendations given below. fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 9 operation do not press down on the actuator or housing do not press down on the actuator or housing lift at the center lift at the center do not rotate the actuator by the ends do not rotate the actuator by the ends flip actuator up to open flip actuator up to open do not apply force to the actuator in the direction shown when it is fully open. opening to an angle greater than 90c will break or damage the connector. do not apply force to the actuator in the direction shown when it is fully open. opening to an angle greater than 90c will break or damage the connector. lift at the center lift at the center do not rotate the actuator by the ends do not rotate the actuator by the ends . locking . fpcffc remoal lock release ^ after fpc/ffc insertion, rotate the actuator down to a full stop, pushing it at the center. ^ carefully rotate the actuator up to 90? lifting it at the center. * this connector uses a back flip type structure. the insert direction of the fpc and the actuator are different from front flip type connectors. do not to try to open the actuator from the fpc side. /? operation and precautions rotate rotate fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 10 fpc fpc stiffener film pcb pcb stiffener film component part pcb operation 6. fpc routing ^ fpc should be routed in a manner that no strain or load is exerted onto the fpc. placing any strain on the fpc may result in unintentional disconnect or damage to the fpc, which can lead to issues such as contact failure. | caution ~ do not allow the fpc or stiffener to touch the casings, housings or any other items. ~ when routing the fpc, make sure that no strain or load is applied to the connector in a pulling, pushing or side-to-side motion. additionally, make sure that no excessive upward or downward force is applied to the connector. ~ when routing the fpc, make sure that there is a stress free path for the fpc and the stiffener is parallel to the pcb. observe correct bend radiuses. ~ do not place or mount any parts that will interfere with the fpc routing. /? operation and precautions e fpc routing . fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 11 /? operation and precautions precautions when mounting connectors on the pcb s handling before mounting on pcb y insertion of the fpc/ffc or operation of the actuator prior to mounting on the pcb is not recommended. s pc board warpage minimize the warpage as much as possible. the connecto r are straight within 0.1 mm max. make sure that the mounting area flatness can accept the connector terminals without caus ing any failure of the solder joints. s forces on the board s when braking the large pc board into individual boards exercise care not to damage the installed connectors. s when attaching the boards or other components with the screws make sure that any stresses will not cause board deflections affecting the mounting areas of the connector. s when hand soldering: ?do not perform hand soldering with the fpc inserted in the connector. * do not apply excessive heat or touch the soldering iron anywhere other than the connector leads. * do not use excessive amount of solder or flux compounds. operation of the actuator or contacts may be affected by excessive amounts of solder or flux compounds. connectors pcb fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 12 the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 05/2017. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? usa: hirose electric (u.s.a.), inc. san jose office 2841 junction ave, suite 200 san jose, ca. 95134 phone : +1-408-253-9640 fax : +1-408-253-9641 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. detroit office (automotive) 17197 n. laurel park drive, suite 253, livonia, mi 48152 phone : +1-734-542-9963 fax : +1-734-542-9964 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. boston office 300 brickstone square suite 201, andover, ma 01810 phone : +1-978-662-5255 usa: hirose electric (u.s.a.), inc. headquarters chicago office 2300 warrenville road, suite 150, downers grove, il 60515 phone : +1-630-282-6700 http://www.hirose.com/us/ china: hirose electric technologies (shenzhen) co., ltd. room 09-13, 19/f, office tower shun hing square, di wang commercial centre, 5002 shen nan dong road, shenzhen city, guangdong province, 518008 phone : +86-755-8207-0851 fax : +86-755-8207-0873 http://www.hirose.com/cn/ korea: hirose korea co.,ltd. 250, huimanggongwon-ro, siheung-si, gyeonggi-do, korea, 15083 phone : +82-31-496-7000 or 7124 fax : +82-31-496-7100 http://www.hirose.co.kr/ germany: hirose electric europe b.v. nuremberg office neumeyerstrasse 22-26, 90411 nurnberg phone : +49-911 32 68 89 63 fax : +49-911 32 68 89 69 http://www.hirose.com/eu/ germany: hirose electric europe b.v. hanover office bayernstr. 3, haus c 30855 langenhagen, germany phone : +49-511 97 82 61 30 fax : +49-511 97 82 61 35 http://www.hirose.com/eu/ germany: hirose electric europe b.v. german branch schoenbergstr. 20, 73760 ostfildern phone : +49-711-456002-1 fax : +49-711-456002-299 http://www.hirose.com/eu/ france: hirose electric europe b.v. paris office regus la garenne colombes,place de la belgique, 71 boulevard national la garenne colombes, 92250, france phone : +33 (0) 1 7082 3170 fax : +33 (1) 7082 3101 http://www.hirose.com/eu/ the netherlands: hirose electric europe b.v. hogehillweg #8 1101 cc amsterdam z-o phone : +31-20-6557460 fax : +31-20-6557469 http://www.hirose.com/eu/ united kingdom: hirose electric europe bv (uk branch) 4 newton court, kelvin drive, knowlhill, milton keynes, mk5 8nh phone : +44-1908 202050 fax : +44-1908 202058 http://www.hirose.com/eu/ china: hirose electric (shanghai) co., ltd. 18, enterprise center tower 2, 209# gong he road, jing?an district, shanghai, china 200070 phone : +86-21-6391-3355 fax : +86-21-6391-3335 http://www.hirose.com/cn/ china: hirose electric (shanghai) co.,ltd. beijing branch a1001, ocean international center, building 56# east 4th ring middle road, chaoyang district, beijing, 100025 phone : +86-10-5165-9332 fax : +86-10-5908-1381 http://www.hirose.com/cn/ taiwan: hirose electric taiwan co., ltd. 103 8f, no.87, zhengzhou rd., taipei phone : +886-2-2555-7377 fax : +886-2-2555-7350 http://www.hirose.com/tw/ hong kong: hirose electric hongkong trading co., ltd. room 1001, west wing, tsim sha tsui centre, 66 mody road, tsim sha tsui east, kowloon, hong kong phone : +852-2803-5338 fax : +852-2591-6560 http://www.hirose.com/hk/ india: hirose electric singapore pte. ltd. delhi liaison office office no.552, regus-green bo ulevard, level5, tower c, sec62, plot b-9a, block b, noida, 201301, uttar pradesh, india phone : +91-12-660-8018 fax : +91-120-4804949 http://www.hirose.com/sg/ singapore: hirose electric singapore pte. ltd. 10 anson road #26-16, international plaza 079903, singapore phone : +65-6324-6113 fax : + 65-6324-6123 http://www.hirose.com/sg/ india: hirose electric singapore pte. ltd. bangalore liaison office unit no-403, 4th floor, no-84, barton centre, mahatma gandhi (mg) road, bangalore 560 001, karnataka, india phone : +91-80-4120 1907 fax : +91-80-4120 9908 http://www.hirose.com/sg/ malaysia: penang representative office 1-21-01, suntech @ penang cybercity (1164), lintang mayang pasir 3,11950, bayan baru, penang, malaysia. phone : +604-619-2564 fax : +604-619-2574 http://www.hirose.com/sg/ thailand: bangkok office (representative office) unit 4703, 47th fl., 1 empire tower, south sathorn road, yannawa, sathorn, bangkok 10120 thailand phone : +66-2-686-1255 fax : +66-2-686-3433 http://www.hirose.com/sg/
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. 1 2017.5 ? 5pq#puupndpoubdujnqspwftuifeftjhoqfyjcjmjuz 5bqfstpobmmjoofsxbmmt product length : l=0.5(n-1)+2.5 *n : number of positions depth : 3.8mm height : 1.0mm ? fh34srj differential impedance yqtsjtfujnf ? ? top/bottom contact ? smooth fpc / ffc insertion 5(35%5; 5jnf ot
dpoofdups '1$ 4 4qfd features 1. low-profile with the 1.0mm above the board and width of 3.8mm the connectors are used in space saving applications. 2. increased fpc/ffc retention as compared with existing similar construction connectors : * in horizontal direction : approximately 2.6 times higher * in vertical direction : approximately 2 times higher 3. unique back-flip rotating actuator the rotating actuator opens from the back of the connector, assuring reliable electrical and mechanical connection. 4. easy fpc insertion and reliable electrical connection proven flip lock actuator allows easy insertion of fpc and provides a tactile sensation when fully closed, confirming complete electrical and mechanical connection. 5. delivered with the actuator open fpc/fpc can be immediately inserted without the need for the opening of the actuator. 6. accepts standard fpc thickness 0.3mm thick standard flexible printed circuit (fpc) can be used. this is the only ultra-low profile zif connector using standard fpc. 7. conductive traces on the pcb can run under the connector no exposed contacts on the bottom of the connector. 8.halogen-free * *as defined by iec61249-2-21 br-900ppm maximum, cl-900ppm maximum, cl + br combined-1,500ppm maximum 9. board placement with automatic equipment flat upper surface and tape and reel packaging facilitate vacuum pick-up and placement. standard reel packaging contains 5000 connectors. fig.1 fig.2 fig.3 fig.4 ? 3.8mm depth 0.5mm pitch, 1.0mm above the board top and top/bottom contact, back-flip actuator flexible printed circuit & flexible flat cable zif connectors fh34srj series in cases where the application will demand a high level of reliability, such as automotive, please contact a company representative for further information. fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 2 product specifications ratings current rating 0.5a (note 1) voltage rating 50vrms ac operating temperature range : -55 to +85? (note 2) operating humidity range : relative humidity 90% max. (no condensation) storage temperature range : -10 to +50? (note 3) storage humidity range : relative humidity 90% max. (no condensation) recommended fpc/ffc thickness : 0.3 ?0.03 mm, gold plated contact pads item specification conditions 1. insulation resistance 500m?min. 100v dc 2. withstanding voltage no flashover or insulation breakdown 250vrms ac / 1 minute 3. contact resistance 100m?max. * including fpc and ffc conductor resistance 1ma, ac / dc 20mv max (ac : 1khz) 4. durability contact resistance : 100m?max. no damage, cracks, or parts dislocation 20cycles 5. vibration no electrical discontinuity of 1? or longer contact resistance : 100m?max. no damage, cracks, or parts dislocation frequency : 10 to 55 hz, single amplitude of 0.75 mm, 10 cycles in each of the 3 axis 6. shock no electrical discontinuity of 1? or longer contact resistance : 100m?max. no damage, cracks, or parts dislocation acceleration of 981m/s 2 , 6 ms duration, sine half- wave, 3 cycles in each of the 3 axis 7. humidity (steady state) contact resistance : 100m?max. insulation resistance : 50m?min. no damage, cracks, or parts dislocation 96 hours at 40? and humidity of 90 to 95% 8. temperature cycle contact resistance : 100m?max. insulation resistance : 50m?min. no damage, cracks, or parts dislocation temperature : -55? / +15? to +35? / +85? / +15? to +35? time: 30 / 2 to 3 / 30 / 2 to 3 minutes 5 cycles 9. resistance to soldering heat no deformation of components affecting performance reflow : at the recommended temperature profile manual soldering: 350? ?0? for 5 seconds (note 3) note1 : when passing the current through all of the contacts, use 70% of the rated current. note2 : includes temperature rise caused by current flow. note3 : the term "storage" refers to products stored for a long period prior to mounting and use. the operating temperature and humidity range covers the non-conducting condition of installed connectors in storage, shipment or during transportation after board mounting. materials / finish part material finish remarks insulator lcp color : gray ul94v-0 pa color : black lcp(8pos.) contacts phosphor bronze gold plating with nickel barrier ??? metalfittings phosphor bronze pure tin reflow plating ??? product number structure refer to the chart below when determining the product specifications from the product number. please select from the product numbers listed in this catalog when placing orders. fh 34s rj ? 30s ? 0.5 sh ( 50 ) ^ _ ` a b c d ^ series name : fh b contact pitch : 0.5mm _ series no. : 34s c termination type sh : smt horizontal mounting type ` rj top and bottom contact, halogen-free (flame retardance ul94v-0). d specifications (50)? standard product 5,000 pcs/reel (99)? 500 pcs/reel a number of contacts : 4 to 50 fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 3 number of contacts contact no.1 polarization mark cav no. number of contacts indicator hrs mark lot no. connector dimensions unit : mm part no. hrs no. no. of contacts abcd fh34srj-4s-0.5sh(50) 580-1238-7 50 4 4 1.5 2.53 3.38 fh34srj-5s-0.5sh(50) 580-1264-7 50 5 4.5 2 3.03 3.88 fh34srj-6s-0.5sh(50) 580-1236-1 50 6 5 2.5 3.53 4.38 fh34srj-7s-0.5sh(50) 580-1200-0 50 7 5.5 3 4.03 4.88 fh34srj-8s-0.5sh(50) 580-1231-8 50 8 6 3.5 4.53 5.38 fh34srj-9s-0.5sh(50) 580-1262-1 50 9 6.5 4 5.03 5.88 fh34srj-10s-0.5sh(50) 580-1251-5 50 10 7 4.5 5.53 6.38 fh34srj-11s-0.5sh(50) 580-1258-4 50 11 7.5 5 6.03 6.88 fh34srj-12s-0.5sh(50) 580-1253-0 50 12 8 5.5 6.53 7.38 fh34srj-14s-0.5sh(50) 580-1252-8 50 14 9 6.5 7.53 8.38 fh34srj-16s-0.5sh(50) 580-1259-7 50 16 10 7.5 8.57 9.38 fh34srj-18s-0.5sh(50) 580-1248-0 50 18 11 8.5 9.57 10.38 fh34srj-20s-0.5sh(50) 580-1256-9 50 20 12 9.5 10.57 11.38 fh34srj-22s-0.5sh(50) 580-1254-3 50 22 13 10.5 11.57 12.38 fh34srj-24s-0.5sh(50) 580-1255-6 50 24 14 11.5 12.57 13.38 fh34srj-26s-0.5sh(50) 580-1247-8 50 26 15 12.5 13.57 14.38 fh34srj-30s-0.5sh(50) 580-1232-0 50 30 17 14.5 15.57 16.38 fh34srj-34s-0.5sh(50) 580-1261-9 50 34 19 16.5 17.53 18.38 fh34srj-40s-0.5sh(50) 580-1260-6 50 40 22 19.5 20.53 21.38 fh34srj-45s-0.5sh(50) 580-1265-0 50 45 24.5 22 23.03 23.88 fh34srj-50s-0.5sh(50) 580-1266-2 50 50 27 24.5 25.53 26.38 tape and reel packaging. order by number of reels.

note 1 : the coplanarity of each terminal lead within specified dimension is 0.1mm max. note 2 : packaged on tape and reel only. check packaging specification. note 3 : slight variations in color of the plastic compounds do not affect form, fit or function of the connector. note 4 : after reflow, the terminal plating may change color, however this does not represent a quality issue. fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 4 recommended pcb mounting pattern b x 0.30.05 0.065 nx x 0.1 contact no.1 connector image : underside 0.25 0.25 2.9 0.15 0.15 0.185 0.5 e0.1 0.80.05 0.80.05 3.30.05 f0.1 /? recommended fpc/ffc dimensions unit : mm part no. hrs no. no. of contacts befg fh34srj-4s-0.5sh(50) 580-1238-7 50 4 1.5 3.1 3.9 2.5 fh34srj-5s-0.5sh(50) 580-1264-7 50 5 2 3.6 4.4 3 fh34srj-6s-0.5sh(50) 580-1236-1 50 6 2.5 4.1 4.9 3.5 fh34srj-7s-0.5sh(50) 580-1200-0 50 7 3 4.6 5.4 4 fh34srj-8s-0.5sh(50) 580-1231-8 50 8 3.5 5.1 5.9 4.5 fh34srj-9s-0.5sh(50) 580-1262-1 50 9 4 5.6 6.4 5 fh34srj-10s-0.5sh(50) 580-1251-5 50 10 4.5 6.1 6.9 5.5 fh34srj-11s-0.5sh(50) 580-1258-4 50 11 5 6.6 7.4 6 fh34srj-12s-0.5sh(50) 580-1253-0 50 12 5.5 7.1 7.9 6.5 fh34srj-14s-0.5sh(50) 580-1252-8 50 14 6.5 8.1 8.9 7.5 fh34srj-16s-0.5sh(50) 580-1259-7 50 16 7.5 9.1 9.9 8.5 fh34srj-18s-0.5sh(50) 580-1248-0 50 18 8.5 10.1 10.9 9.5 fh34srj-20s-0.5sh(50) 580-1256-9 50 20 9.5 11.1 11.9 10.5 fh34srj-22s-0.5sh(50) 580-1254-3 50 22 10.5 12.1 12.9 11.5 fh34srj-24s-0.5sh(50) 580-1255-6 50 24 11.5 13.1 13.9 12.5 fh34srj-26s-0.5sh(50) 580-1247-8 50 26 12.5 14.1 14.9 13.5 fh34srj-30s-0.5sh(50) 580-1232-0 50 30 14.5 16.1 16.9 15.5 fh34srj-34s-0.5sh(50) 580-1261-9 50 34 16.5 18.1 18.9 17.5 fh34srj-40s-0.5sh(50) 580-1260-6 50 40 19.5 21.1 21.9 20.5 fh34srj-45s-0.5sh(50) 580-1265-0 50 45 22 23.6 24.4 23 fh34srj-50s-0.5sh(50) 580-1266-2 50 50 24.5 26.1 26.9 25.5 nx contact no.1(top contact) (uncovered area) b 0.50.07 g0.05 0.50.07 r0.20.1 0.5 0.30.03 0.30.03 0.03 z z contact no.1(bottom contact) 1.50.3 2.50.3 (stiffener) p nx pcb mounting pattern image 0.250.03 0.650.03 3.30.03 0.80.03 e0.03 f0.03 0.5 b y y 0.03 recommended stencil pattern (recommended stencil thickness : t=0.1mm) note 1 : dimension p shall be 0.5mm min. note 2 : the recommended fpc pattern above has been designed only for fh34srj series. when using the fpc for fh19sc series (lower contact), uncoverd area shall be 2.50.3mm and stiffener shall be 3.5mm min. /? recommended pcb mounting pattern and metal mask dimensions y fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 5 /? recommended fpc construction 1. using single-sided fpc fpc : flexible printed circuit fpc : flexible printed circuit material name material material thickness (m) 2. using double-sided fpc 1. this specification is a recommendation for the construction of the fh34srj series fpc and ffc (t=0.3 0.03). 2. for details about the construction, please contact the fpc/ffc manufacturers. * to prevent release of the fpc due to its bending, use of the double sided fpc with copper foil on the back side is not recommended. covering film layer cover adhesive polyimide 1 mil thick 25 25 material name material material thickness (m) 3. using ffc ffc : flexible flat cable * tolerance of 20m. material name material material thickness (m) ? contact fpc manufacturer for specific details. surface treatment 0.2m thick gold plated over 1 to 5m thick nickel underplating 3 copper foil base adhesive base film reinforcement material adhesive stiffener cu 1oz thermosetting adhesive polyimide 1 mil thick thermosetting adhesive polyimide 7 mil thick 35 25 25 35 175 total 298 polyester film adhesive thermoplastic polyester (12) (30) 35 30 12 30 188 295 gold plated annealed copper foil adhesive polyester adhesive stiffener polyester polyester polyester total (25) (25) covering layer film cover adhesive polyimide 1 mil thick surface treatment 0.2m thick gold plated over 1 to 5m thick nickel underplating 3 through-hole copper copper foil base adhesive base film base adhesive cu cu 1/2oz thermosetting adhesive polyimide 1 mil thick 15 18 18 25 18 copper foil cover adhesive covering film layer reinforcement material adhesive stiffener cu 1/2oz thermosetting adhesive polyimide 1 mil thick thermosetting adhesive polyimide 4 mil thick (18) 25 25 50 100 total 297 fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 6 400mm min(leader) 100mm min (empty) 1600mm min (trailer ~ empty) embossed carrier tape top cover tape direction of unreeling (l : inside) ?13 (m : outside) ?380 ?80 24mm max direction of unreeling 40.1 1.95 80.1 ?1.5 +0.1 0 1.750.1 j0.1 h0.3 2 0.3 32mm min 40.1 80.1 ?1.5 +0.1 0 1.7 +0.15 0 2 0.3 1.95 1.750.1 j0.1 k0.1 h0.3 direction of unreeling 1.5 +0.1 0 /? packaging specification ? reel dimensions ? embossed carrier tape dimensions (tape width 24mm max.) ? embossed carrier tape dimensions (tape width 32mm min.) unit : mm part no. hrs no. no. of contacts hjklm fh34srj-4s-0.5sh(50) 580-1238-7 50 4 16 7.5 ? 17.4 21.4 fh34srj-5s-0.5sh(50) 580-1264-7 50 5 ? fh34srj-6s-0.5sh(50) 580-1236-1 50 6 ? fh34srj-7s-0.5sh(50) 580-1200-0 50 7 ? fh34srj-8s-0.5sh(50) 580-1231-8 50 8 ? fh34srj-9s-0.5sh(50) 580-1262-1 50 9 ? fh34srj-10s-0.5sh(50) 580-1251-5 50 10 ? fh34srj-11s-0.5sh(50) 580-1258-4 50 11 ? fh34srj-12s-0.5sh(50) 580-1253-0 50 12 24 11.5 ? 25.4 29.4 fh34srj-14s-0.5sh(50) 580-1252-8 50 14 ? fh34srj-16s-0.5sh(50) 580-1259-7 50 16 ? fh34srj-18s-0.5sh(50) 580-1248-0 50 18 ? fh34srj-20s-0.5sh(50) 580-1256-9 50 20 ? fh34srj-22s-0.5sh(50) 580-1254-3 50 22 ? fh34srj-24s-0.5sh(50) 580-1255-6 50 24 ? fh34srj-26s-0.5sh(50) 580-1247-8 50 26 ? fh34srj-30s-0.5sh(50) 580-1232-0 50 30 32 14.2 28.4 33.4 37.4 fh34srj-34s-0.5sh(50) 580-1261-9 50 34 fh34srj-40s-0.5sh(50) 580-1260-6 50 40 44 20.2 40.4 45.4 49.4 fh34srj-45s-0.5sh(50) 580-1265-0 50 45 fh34srj-50s-0.5sh(50) 580-1266-2 50 50 fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 7 max 250? start temperature(?) time (seconds) 25? (60 sec.) (60 sec.) 90 to 120 sec. preheating soldering 0 50 100 150 150? 200? 230? 200 250 hrs test condition solder method : reflow, ir/hot air environment : room air solder composition : paste, 96.5%sn/3.0%ag/0.5%cu (senju metal industry, co., ltd.'s part number: m705-221cm5-42-10.5) test board : glass epoxy 18.3mm32.85mm0.8mm thick land dimensions : 0.3mm0.8mm metal mask : 0.250.650.1mm thick the temperature profiles shown are based on the above conditions. in individual applications the actual temperature may vary, depending on solder paste type, volume / thickness and board size / thickness. consult your solder paste and equipment manufacturer for specific recommendations. /? temperature profile fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 8 actuator open actuator close pcb pcb fpc fpc /? operation and precautions operation 1. as delivered 2. fpc/ffc insertion 3. fpc/ffc insertion (the top contact specification) delivered with the actuator open. there is no need to operate the actuator prior to inserting the fpc/ffc. | precautions ~ do not close the actuator without the fpc/fpc inserted. be sure that the fpc is parallel to the surface of the pcb, then completely insert into the connector. | caution ~ do not attempt to insert the fpc if actuator is closed. ~ if the actuator is closed and if the fpc is twisted during insertion, it can cause contact deformation and / or contact failure. proper insertion skewed insertion shallow insertion ^ insert the fpc/ffc with the conductive surfaces facing up. align the fpc/ffc straight with the connector and insert it firmly all the way. caution : handle connectors carefully, as they are very small and thin. please refer to this section for verification of the following points: ^ the actuator packaged in the open condition. the actuator packaged in the open condition. boundary of fpc pattern edge of housing opening boundary of fpc pattern edge of housing opening ^ exercise care when handling connectors. follow recommendations given below. fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 9 operation do not press down on the actuator or housing do not press down on the actuator or housing lift at the center lift at the center do not rotate the actuator by the ends do not rotate the actuator by the ends flip actuator up to open flip actuator up to open do not apply force to the actuator in the direction shown when it is fully open. opening to an angle greater than 90c will break or damage the connector. do not apply force to the actuator in the direction shown when it is fully open. opening to an angle greater than 90c will break or damage the connector. lift at the center lift at the center do not rotate the actuator by the ends do not rotate the actuator by the ends . locking . fpcffc remoal lock release ^ after fpc/ffc insertion, rotate the actuator down to a full stop, pushing it at the center. ^ carefully rotate the actuator up to 90? lifting it at the center. * this connector uses a back flip type structure. the insert direction of the fpc and the actuator are different from front flip type connectors. do not to try to open the actuator from the fpc side. /? operation and precautions rotate rotate fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 10 fpc fpc stiffener film pcb pcb stiffener film component part pcb operation 6. fpc routing ^ fpc should be routed in a manner that no strain or load is exerted onto the fpc. placing any strain on the fpc may result in unintentional disconnect or damage to the fpc, which can lead to issues such as contact failure. | caution ~ do not allow the fpc or stiffener to touch the casings, housings or any other items. ~ when routing the fpc, make sure that no strain or load is applied to the connector in a pulling, pushing or side-to-side motion. additionally, make sure that no excessive upward or downward force is applied to the connector. ~ when routing the fpc, make sure that there is a stress free path for the fpc and the stiffener is parallel to the pcb. observe correct bend radiuses. ~ do not place or mount any parts that will interfere with the fpc routing. /? operation and precautions e fpc routing . fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 11 /? operation and precautions precautions when mounting connectors on the pcb s handling before mounting on pcb y insertion of the fpc/ffc or operation of the actuator prior to mounting on the pcb is not recommended. s pc board warpage minimize the warpage as much as possible. the connecto r are straight within 0.1 mm max. make sure that the mounting area flatness can accept the connector terminals without caus ing any failure of the solder joints. s forces on the board s when braking the large pc board into individual boards exercise care not to damage the installed connectors. s when attaching the boards or other components with the screws make sure that any stresses will not cause board deflections affecting the mounting areas of the connector. s when hand soldering: ?do not perform hand soldering with the fpc inserted in the connector. * do not apply excessive heat or touch the soldering iron anywhere other than the connector leads. * do not use excessive amount of solder or flux compounds. operation of the actuator or contacts may be affected by excessive amounts of solder or flux compounds. connectors pcb fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 12 the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 05/2017. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? usa: hirose electric (u.s.a.), inc. san jose office 2841 junction ave, suite 200 san jose, ca. 95134 phone : +1-408-253-9640 fax : +1-408-253-9641 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. detroit office (automotive) 17197 n. laurel park drive, suite 253, livonia, mi 48152 phone : +1-734-542-9963 fax : +1-734-542-9964 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. boston office 300 brickstone square suite 201, andover, ma 01810 phone : +1-978-662-5255 usa: hirose electric (u.s.a.), inc. headquarters chicago office 2300 warrenville road, suite 150, downers grove, il 60515 phone : +1-630-282-6700 http://www.hirose.com/us/ china: hirose electric technologies (shenzhen) co., ltd. room 09-13, 19/f, office tower shun hing square, di wang commercial centre, 5002 shen nan dong road, shenzhen city, guangdong province, 518008 phone : +86-755-8207-0851 fax : +86-755-8207-0873 http://www.hirose.com/cn/ korea: hirose korea co.,ltd. 250, huimanggongwon-ro, siheung-si, gyeonggi-do, korea, 15083 phone : +82-31-496-7000 or 7124 fax : +82-31-496-7100 http://www.hirose.co.kr/ germany: hirose electric europe b.v. nuremberg office neumeyerstrasse 22-26, 90411 nurnberg phone : +49-911 32 68 89 63 fax : +49-911 32 68 89 69 http://www.hirose.com/eu/ germany: hirose electric europe b.v. hanover office bayernstr. 3, haus c 30855 langenhagen, germany phone : +49-511 97 82 61 30 fax : +49-511 97 82 61 35 http://www.hirose.com/eu/ germany: hirose electric europe b.v. german branch schoenbergstr. 20, 73760 ostfildern phone : +49-711-456002-1 fax : +49-711-456002-299 http://www.hirose.com/eu/ france: hirose electric europe b.v. paris office regus la garenne colombes,place de la belgique, 71 boulevard national la garenne colombes, 92250, france phone : +33 (0) 1 7082 3170 fax : +33 (1) 7082 3101 http://www.hirose.com/eu/ the netherlands: hirose electric europe b.v. hogehillweg #8 1101 cc amsterdam z-o phone : +31-20-6557460 fax : +31-20-6557469 http://www.hirose.com/eu/ united kingdom: hirose electric europe bv (uk branch) 4 newton court, kelvin drive, knowlhill, milton keynes, mk5 8nh phone : +44-1908 202050 fax : +44-1908 202058 http://www.hirose.com/eu/ china: hirose electric (shanghai) co., ltd. 18, enterprise center tower 2, 209# gong he road, jing?an district, shanghai, china 200070 phone : +86-21-6391-3355 fax : +86-21-6391-3335 http://www.hirose.com/cn/ china: hirose electric (shanghai) co.,ltd. beijing branch a1001, ocean international center, building 56# east 4th ring middle road, chaoyang district, beijing, 100025 phone : +86-10-5165-9332 fax : +86-10-5908-1381 http://www.hirose.com/cn/ taiwan: hirose electric taiwan co., ltd. 103 8f, no.87, zhengzhou rd., taipei phone : +886-2-2555-7377 fax : +886-2-2555-7350 http://www.hirose.com/tw/ hong kong: hirose electric hongkong trading co., ltd. room 1001, west wing, tsim sha tsui centre, 66 mody road, tsim sha tsui east, kowloon, hong kong phone : +852-2803-5338 fax : +852-2591-6560 http://www.hirose.com/hk/ india: hirose electric singapore pte. ltd. delhi liaison office office no.552, regus-green bo ulevard, level5, tower c, sec62, plot b-9a, block b, noida, 201301, uttar pradesh, india phone : +91-12-660-8018 fax : +91-120-4804949 http://www.hirose.com/sg/ singapore: hirose electric singapore pte. ltd. 10 anson road #26-16, international plaza 079903, singapore phone : +65-6324-6113 fax : + 65-6324-6123 http://www.hirose.com/sg/ india: hirose electric singapore pte. ltd. bangalore liaison office unit no-403, 4th floor, no-84, barton centre, mahatma gandhi (mg) road, bangalore 560 001, karnataka, india phone : +91-80-4120 1907 fax : +91-80-4120 9908 http://www.hirose.com/sg/ malaysia: penang representative office 1-21-01, suntech @ penang cybercity (1164), lintang mayang pasir 3,11950, bayan baru, penang, malaysia. phone : +604-619-2564 fax : +604-619-2574 http://www.hirose.com/sg/ thailand: bangkok office (representative office) unit 4703, 47th fl., 1 empire tower, south sathorn road, yannawa, sathorn, bangkok 10120 thailand phone : +66-2-686-1255 fax : +66-2-686-3433 http://www.hirose.com/sg/
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. 1 2017.5 ? 5pq#puupndpoubdujnqspwftuifeftjhoqfyjcjmjuz 5bqfstpobmmjoofsxbmmt product length : l=0.5(n-1)+2.5 *n : number of positions depth : 3.8mm height : 1.0mm ? fh34srj differential impedance yqtsjtfujnf ? ? top/bottom contact ? smooth fpc / ffc insertion 5(35%5; 5jnf ot
dpoofdups '1$ 4 4qfd features 1. low-profile with the 1.0mm above the board and width of 3.8mm the connectors are used in space saving applications. 2. increased fpc/ffc retention as compared with existing similar construction connectors : * in horizontal direction : approximately 2.6 times higher * in vertical direction : approximately 2 times higher 3. unique back-flip rotating actuator the rotating actuator opens from the back of the connector, assuring reliable electrical and mechanical connection. 4. easy fpc insertion and reliable electrical connection proven flip lock actuator allows easy insertion of fpc and provides a tactile sensation when fully closed, confirming complete electrical and mechanical connection. 5. delivered with the actuator open fpc/fpc can be immediately inserted without the need for the opening of the actuator. 6. accepts standard fpc thickness 0.3mm thick standard flexible printed circuit (fpc) can be used. this is the only ultra-low profile zif connector using standard fpc. 7. conductive traces on the pcb can run under the connector no exposed contacts on the bottom of the connector. 8.halogen-free * *as defined by iec61249-2-21 br-900ppm maximum, cl-900ppm maximum, cl + br combined-1,500ppm maximum 9. board placement with automatic equipment flat upper surface and tape and reel packaging facilitate vacuum pick-up and placement. standard reel packaging contains 5000 connectors. fig.1 fig.2 fig.3 fig.4 ? 3.8mm depth 0.5mm pitch, 1.0mm above the board top and top/bottom contact, back-flip actuator flexible printed circuit & flexible flat cable zif connectors fh34srj series in cases where the application will demand a high level of reliability, such as automotive, please contact a company representative for further information. fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 2 product specifications ratings current rating 0.5a (note 1) voltage rating 50vrms ac operating temperature range : -55 to +85? (note 2) operating humidity range : relative humidity 90% max. (no condensation) storage temperature range : -10 to +50? (note 3) storage humidity range : relative humidity 90% max. (no condensation) recommended fpc/ffc thickness : 0.3 ?0.03 mm, gold plated contact pads item specification conditions 1. insulation resistance 500m?min. 100v dc 2. withstanding voltage no flashover or insulation breakdown 250vrms ac / 1 minute 3. contact resistance 100m?max. * including fpc and ffc conductor resistance 1ma, ac / dc 20mv max (ac : 1khz) 4. durability contact resistance : 100m?max. no damage, cracks, or parts dislocation 20cycles 5. vibration no electrical discontinuity of 1? or longer contact resistance : 100m?max. no damage, cracks, or parts dislocation frequency : 10 to 55 hz, single amplitude of 0.75 mm, 10 cycles in each of the 3 axis 6. shock no electrical discontinuity of 1? or longer contact resistance : 100m?max. no damage, cracks, or parts dislocation acceleration of 981m/s 2 , 6 ms duration, sine half- wave, 3 cycles in each of the 3 axis 7. humidity (steady state) contact resistance : 100m?max. insulation resistance : 50m?min. no damage, cracks, or parts dislocation 96 hours at 40? and humidity of 90 to 95% 8. temperature cycle contact resistance : 100m?max. insulation resistance : 50m?min. no damage, cracks, or parts dislocation temperature : -55? / +15? to +35? / +85? / +15? to +35? time: 30 / 2 to 3 / 30 / 2 to 3 minutes 5 cycles 9. resistance to soldering heat no deformation of components affecting performance reflow : at the recommended temperature profile manual soldering: 350? ?0? for 5 seconds (note 3) note1 : when passing the current through all of the contacts, use 70% of the rated current. note2 : includes temperature rise caused by current flow. note3 : the term "storage" refers to products stored for a long period prior to mounting and use. the operating temperature and humidity range covers the non-conducting condition of installed connectors in storage, shipment or during transportation after board mounting. materials / finish part material finish remarks insulator lcp color : gray ul94v-0 pa color : black lcp(8pos.) contacts phosphor bronze gold plating with nickel barrier ??? metalfittings phosphor bronze pure tin reflow plating ??? product number structure refer to the chart below when determining the product specifications from the product number. please select from the product numbers listed in this catalog when placing orders. fh 34s rj ? 30s ? 0.5 sh ( 50 ) ^ _ ` a b c d ^ series name : fh b contact pitch : 0.5mm _ series no. : 34s c termination type sh : smt horizontal mounting type ` rj top and bottom contact, halogen-free (flame retardance ul94v-0). d specifications (50)? standard product 5,000 pcs/reel (99)? 500 pcs/reel a number of contacts : 4 to 50 fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 3 number of contacts contact no.1 polarization mark cav no. number of contacts indicator hrs mark lot no. connector dimensions unit : mm part no. hrs no. no. of contacts abcd fh34srj-4s-0.5sh(50) 580-1238-7 50 4 4 1.5 2.53 3.38 fh34srj-5s-0.5sh(50) 580-1264-7 50 5 4.5 2 3.03 3.88 fh34srj-6s-0.5sh(50) 580-1236-1 50 6 5 2.5 3.53 4.38 fh34srj-7s-0.5sh(50) 580-1200-0 50 7 5.5 3 4.03 4.88 fh34srj-8s-0.5sh(50) 580-1231-8 50 8 6 3.5 4.53 5.38 fh34srj-9s-0.5sh(50) 580-1262-1 50 9 6.5 4 5.03 5.88 fh34srj-10s-0.5sh(50) 580-1251-5 50 10 7 4.5 5.53 6.38 fh34srj-11s-0.5sh(50) 580-1258-4 50 11 7.5 5 6.03 6.88 fh34srj-12s-0.5sh(50) 580-1253-0 50 12 8 5.5 6.53 7.38 fh34srj-14s-0.5sh(50) 580-1252-8 50 14 9 6.5 7.53 8.38 fh34srj-16s-0.5sh(50) 580-1259-7 50 16 10 7.5 8.57 9.38 fh34srj-18s-0.5sh(50) 580-1248-0 50 18 11 8.5 9.57 10.38 fh34srj-20s-0.5sh(50) 580-1256-9 50 20 12 9.5 10.57 11.38 fh34srj-22s-0.5sh(50) 580-1254-3 50 22 13 10.5 11.57 12.38 fh34srj-24s-0.5sh(50) 580-1255-6 50 24 14 11.5 12.57 13.38 fh34srj-26s-0.5sh(50) 580-1247-8 50 26 15 12.5 13.57 14.38 fh34srj-30s-0.5sh(50) 580-1232-0 50 30 17 14.5 15.57 16.38 fh34srj-34s-0.5sh(50) 580-1261-9 50 34 19 16.5 17.53 18.38 fh34srj-40s-0.5sh(50) 580-1260-6 50 40 22 19.5 20.53 21.38 fh34srj-45s-0.5sh(50) 580-1265-0 50 45 24.5 22 23.03 23.88 fh34srj-50s-0.5sh(50) 580-1266-2 50 50 27 24.5 25.53 26.38 tape and reel packaging. order by number of reels.

note 1 : the coplanarity of each terminal lead within specified dimension is 0.1mm max. note 2 : packaged on tape and reel only. check packaging specification. note 3 : slight variations in color of the plastic compounds do not affect form, fit or function of the connector. note 4 : after reflow, the terminal plating may change color, however this does not represent a quality issue. fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 4 recommended pcb mounting pattern b x 0.30.05 0.065 nx x 0.1 contact no.1 connector image : underside 0.25 0.25 2.9 0.15 0.15 0.185 0.5 e0.1 0.80.05 0.80.05 3.30.05 f0.1 /? recommended fpc/ffc dimensions unit : mm part no. hrs no. no. of contacts befg fh34srj-4s-0.5sh(50) 580-1238-7 50 4 1.5 3.1 3.9 2.5 fh34srj-5s-0.5sh(50) 580-1264-7 50 5 2 3.6 4.4 3 fh34srj-6s-0.5sh(50) 580-1236-1 50 6 2.5 4.1 4.9 3.5 fh34srj-7s-0.5sh(50) 580-1200-0 50 7 3 4.6 5.4 4 fh34srj-8s-0.5sh(50) 580-1231-8 50 8 3.5 5.1 5.9 4.5 fh34srj-9s-0.5sh(50) 580-1262-1 50 9 4 5.6 6.4 5 fh34srj-10s-0.5sh(50) 580-1251-5 50 10 4.5 6.1 6.9 5.5 fh34srj-11s-0.5sh(50) 580-1258-4 50 11 5 6.6 7.4 6 fh34srj-12s-0.5sh(50) 580-1253-0 50 12 5.5 7.1 7.9 6.5 fh34srj-14s-0.5sh(50) 580-1252-8 50 14 6.5 8.1 8.9 7.5 fh34srj-16s-0.5sh(50) 580-1259-7 50 16 7.5 9.1 9.9 8.5 fh34srj-18s-0.5sh(50) 580-1248-0 50 18 8.5 10.1 10.9 9.5 fh34srj-20s-0.5sh(50) 580-1256-9 50 20 9.5 11.1 11.9 10.5 fh34srj-22s-0.5sh(50) 580-1254-3 50 22 10.5 12.1 12.9 11.5 fh34srj-24s-0.5sh(50) 580-1255-6 50 24 11.5 13.1 13.9 12.5 fh34srj-26s-0.5sh(50) 580-1247-8 50 26 12.5 14.1 14.9 13.5 fh34srj-30s-0.5sh(50) 580-1232-0 50 30 14.5 16.1 16.9 15.5 fh34srj-34s-0.5sh(50) 580-1261-9 50 34 16.5 18.1 18.9 17.5 fh34srj-40s-0.5sh(50) 580-1260-6 50 40 19.5 21.1 21.9 20.5 fh34srj-45s-0.5sh(50) 580-1265-0 50 45 22 23.6 24.4 23 fh34srj-50s-0.5sh(50) 580-1266-2 50 50 24.5 26.1 26.9 25.5 nx contact no.1(top contact) (uncovered area) b 0.50.07 g0.05 0.50.07 r0.20.1 0.5 0.30.03 0.30.03 0.03 z z contact no.1(bottom contact) 1.50.3 2.50.3 (stiffener) p nx pcb mounting pattern image 0.250.03 0.650.03 3.30.03 0.80.03 e0.03 f0.03 0.5 b y y 0.03 recommended stencil pattern (recommended stencil thickness : t=0.1mm) note 1 : dimension p shall be 0.5mm min. note 2 : the recommended fpc pattern above has been designed only for fh34srj series. when using the fpc for fh19sc series (lower contact), uncoverd area shall be 2.50.3mm and stiffener shall be 3.5mm min. /? recommended pcb mounting pattern and metal mask dimensions y fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 5 /? recommended fpc construction 1. using single-sided fpc fpc : flexible printed circuit fpc : flexible printed circuit material name material material thickness (m) 2. using double-sided fpc 1. this specification is a recommendation for the construction of the fh34srj series fpc and ffc (t=0.3 0.03). 2. for details about the construction, please contact the fpc/ffc manufacturers. * to prevent release of the fpc due to its bending, use of the double sided fpc with copper foil on the back side is not recommended. covering film layer cover adhesive polyimide 1 mil thick 25 25 material name material material thickness (m) 3. using ffc ffc : flexible flat cable * tolerance of 20m. material name material material thickness (m) ? contact fpc manufacturer for specific details. surface treatment 0.2m thick gold plated over 1 to 5m thick nickel underplating 3 copper foil base adhesive base film reinforcement material adhesive stiffener cu 1oz thermosetting adhesive polyimide 1 mil thick thermosetting adhesive polyimide 7 mil thick 35 25 25 35 175 total 298 polyester film adhesive thermoplastic polyester (12) (30) 35 30 12 30 188 295 gold plated annealed copper foil adhesive polyester adhesive stiffener polyester polyester polyester total (25) (25) covering layer film cover adhesive polyimide 1 mil thick surface treatment 0.2m thick gold plated over 1 to 5m thick nickel underplating 3 through-hole copper copper foil base adhesive base film base adhesive cu cu 1/2oz thermosetting adhesive polyimide 1 mil thick 15 18 18 25 18 copper foil cover adhesive covering film layer reinforcement material adhesive stiffener cu 1/2oz thermosetting adhesive polyimide 1 mil thick thermosetting adhesive polyimide 4 mil thick (18) 25 25 50 100 total 297 fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 6 400mm min(leader) 100mm min (empty) 1600mm min (trailer ~ empty) embossed carrier tape top cover tape direction of unreeling (l : inside) ?13 (m : outside) ?380 ?80 24mm max direction of unreeling 40.1 1.95 80.1 ?1.5 +0.1 0 1.750.1 j0.1 h0.3 2 0.3 32mm min 40.1 80.1 ?1.5 +0.1 0 1.7 +0.15 0 2 0.3 1.95 1.750.1 j0.1 k0.1 h0.3 direction of unreeling 1.5 +0.1 0 /? packaging specification ? reel dimensions ? embossed carrier tape dimensions (tape width 24mm max.) ? embossed carrier tape dimensions (tape width 32mm min.) unit : mm part no. hrs no. no. of contacts hjklm fh34srj-4s-0.5sh(50) 580-1238-7 50 4 16 7.5 ? 17.4 21.4 fh34srj-5s-0.5sh(50) 580-1264-7 50 5 ? fh34srj-6s-0.5sh(50) 580-1236-1 50 6 ? fh34srj-7s-0.5sh(50) 580-1200-0 50 7 ? fh34srj-8s-0.5sh(50) 580-1231-8 50 8 ? fh34srj-9s-0.5sh(50) 580-1262-1 50 9 ? fh34srj-10s-0.5sh(50) 580-1251-5 50 10 ? fh34srj-11s-0.5sh(50) 580-1258-4 50 11 ? fh34srj-12s-0.5sh(50) 580-1253-0 50 12 24 11.5 ? 25.4 29.4 fh34srj-14s-0.5sh(50) 580-1252-8 50 14 ? fh34srj-16s-0.5sh(50) 580-1259-7 50 16 ? fh34srj-18s-0.5sh(50) 580-1248-0 50 18 ? fh34srj-20s-0.5sh(50) 580-1256-9 50 20 ? fh34srj-22s-0.5sh(50) 580-1254-3 50 22 ? fh34srj-24s-0.5sh(50) 580-1255-6 50 24 ? fh34srj-26s-0.5sh(50) 580-1247-8 50 26 ? fh34srj-30s-0.5sh(50) 580-1232-0 50 30 32 14.2 28.4 33.4 37.4 fh34srj-34s-0.5sh(50) 580-1261-9 50 34 fh34srj-40s-0.5sh(50) 580-1260-6 50 40 44 20.2 40.4 45.4 49.4 fh34srj-45s-0.5sh(50) 580-1265-0 50 45 fh34srj-50s-0.5sh(50) 580-1266-2 50 50 fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 7 max 250? start temperature(?) time (seconds) 25? (60 sec.) (60 sec.) 90 to 120 sec. preheating soldering 0 50 100 150 150? 200? 230? 200 250 hrs test condition solder method : reflow, ir/hot air environment : room air solder composition : paste, 96.5%sn/3.0%ag/0.5%cu (senju metal industry, co., ltd.'s part number: m705-221cm5-42-10.5) test board : glass epoxy 18.3mm32.85mm0.8mm thick land dimensions : 0.3mm0.8mm metal mask : 0.250.650.1mm thick the temperature profiles shown are based on the above conditions. in individual applications the actual temperature may vary, depending on solder paste type, volume / thickness and board size / thickness. consult your solder paste and equipment manufacturer for specific recommendations. /? temperature profile fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 8 actuator open actuator close pcb pcb fpc fpc /? operation and precautions operation 1. as delivered 2. fpc/ffc insertion 3. fpc/ffc insertion (the top contact specification) delivered with the actuator open. there is no need to operate the actuator prior to inserting the fpc/ffc. | precautions ~ do not close the actuator without the fpc/fpc inserted. be sure that the fpc is parallel to the surface of the pcb, then completely insert into the connector. | caution ~ do not attempt to insert the fpc if actuator is closed. ~ if the actuator is closed and if the fpc is twisted during insertion, it can cause contact deformation and / or contact failure. proper insertion skewed insertion shallow insertion ^ insert the fpc/ffc with the conductive surfaces facing up. align the fpc/ffc straight with the connector and insert it firmly all the way. caution : handle connectors carefully, as they are very small and thin. please refer to this section for verification of the following points: ^ the actuator packaged in the open condition. the actuator packaged in the open condition. boundary of fpc pattern edge of housing opening boundary of fpc pattern edge of housing opening ^ exercise care when handling connectors. follow recommendations given below. fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 9 operation do not press down on the actuator or housing do not press down on the actuator or housing lift at the center lift at the center do not rotate the actuator by the ends do not rotate the actuator by the ends flip actuator up to open flip actuator up to open do not apply force to the actuator in the direction shown when it is fully open. opening to an angle greater than 90c will break or damage the connector. do not apply force to the actuator in the direction shown when it is fully open. opening to an angle greater than 90c will break or damage the connector. lift at the center lift at the center do not rotate the actuator by the ends do not rotate the actuator by the ends . locking . fpcffc remoal lock release ^ after fpc/ffc insertion, rotate the actuator down to a full stop, pushing it at the center. ^ carefully rotate the actuator up to 90? lifting it at the center. * this connector uses a back flip type structure. the insert direction of the fpc and the actuator are different from front flip type connectors. do not to try to open the actuator from the fpc side. /? operation and precautions rotate rotate fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 10 fpc fpc stiffener film pcb pcb stiffener film component part pcb operation 6. fpc routing ^ fpc should be routed in a manner that no strain or load is exerted onto the fpc. placing any strain on the fpc may result in unintentional disconnect or damage to the fpc, which can lead to issues such as contact failure. | caution ~ do not allow the fpc or stiffener to touch the casings, housings or any other items. ~ when routing the fpc, make sure that no strain or load is applied to the connector in a pulling, pushing or side-to-side motion. additionally, make sure that no excessive upward or downward force is applied to the connector. ~ when routing the fpc, make sure that there is a stress free path for the fpc and the stiffener is parallel to the pcb. observe correct bend radiuses. ~ do not place or mount any parts that will interfere with the fpc routing. /? operation and precautions e fpc routing . fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 11 /? operation and precautions precautions when mounting connectors on the pcb s handling before mounting on pcb y insertion of the fpc/ffc or operation of the actuator prior to mounting on the pcb is not recommended. s pc board warpage minimize the warpage as much as possible. the connecto r are straight within 0.1 mm max. make sure that the mounting area flatness can accept the connector terminals without caus ing any failure of the solder joints. s forces on the board s when braking the large pc board into individual boards exercise care not to damage the installed connectors. s when attaching the boards or other components with the screws make sure that any stresses will not cause board deflections affecting the mounting areas of the connector. s when hand soldering: ?do not perform hand soldering with the fpc inserted in the connector. * do not apply excessive heat or touch the soldering iron anywhere other than the connector leads. * do not use excessive amount of solder or flux compounds. operation of the actuator or contacts may be affected by excessive amounts of solder or flux compounds. connectors pcb fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 12 the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 05/2017. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? usa: hirose electric (u.s.a.), inc. san jose office 2841 junction ave, suite 200 san jose, ca. 95134 phone : +1-408-253-9640 fax : +1-408-253-9641 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. detroit office (automotive) 17197 n. laurel park drive, suite 253, livonia, mi 48152 phone : +1-734-542-9963 fax : +1-734-542-9964 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. boston office 300 brickstone square suite 201, andover, ma 01810 phone : +1-978-662-5255 usa: hirose electric (u.s.a.), inc. headquarters chicago office 2300 warrenville road, suite 150, downers grove, il 60515 phone : +1-630-282-6700 http://www.hirose.com/us/ china: hirose electric technologies (shenzhen) co., ltd. room 09-13, 19/f, office tower shun hing square, di wang commercial centre, 5002 shen nan dong road, shenzhen city, guangdong province, 518008 phone : +86-755-8207-0851 fax : +86-755-8207-0873 http://www.hirose.com/cn/ korea: hirose korea co.,ltd. 250, huimanggongwon-ro, siheung-si, gyeonggi-do, korea, 15083 phone : +82-31-496-7000 or 7124 fax : +82-31-496-7100 http://www.hirose.co.kr/ germany: hirose electric europe b.v. nuremberg office neumeyerstrasse 22-26, 90411 nurnberg phone : +49-911 32 68 89 63 fax : +49-911 32 68 89 69 http://www.hirose.com/eu/ germany: hirose electric europe b.v. hanover office bayernstr. 3, haus c 30855 langenhagen, germany phone : +49-511 97 82 61 30 fax : +49-511 97 82 61 35 http://www.hirose.com/eu/ germany: hirose electric europe b.v. german branch schoenbergstr. 20, 73760 ostfildern phone : +49-711-456002-1 fax : +49-711-456002-299 http://www.hirose.com/eu/ france: hirose electric europe b.v. paris office regus la garenne colombes,place de la belgique, 71 boulevard national la garenne colombes, 92250, france phone : +33 (0) 1 7082 3170 fax : +33 (1) 7082 3101 http://www.hirose.com/eu/ the netherlands: hirose electric europe b.v. hogehillweg #8 1101 cc amsterdam z-o phone : +31-20-6557460 fax : +31-20-6557469 http://www.hirose.com/eu/ united kingdom: hirose electric europe bv (uk branch) 4 newton court, kelvin drive, knowlhill, milton keynes, mk5 8nh phone : +44-1908 202050 fax : +44-1908 202058 http://www.hirose.com/eu/ china: hirose electric (shanghai) co., ltd. 18, enterprise center tower 2, 209# gong he road, jing?an district, shanghai, china 200070 phone : +86-21-6391-3355 fax : +86-21-6391-3335 http://www.hirose.com/cn/ china: hirose electric (shanghai) co.,ltd. beijing branch a1001, ocean international center, building 56# east 4th ring middle road, chaoyang district, beijing, 100025 phone : +86-10-5165-9332 fax : +86-10-5908-1381 http://www.hirose.com/cn/ taiwan: hirose electric taiwan co., ltd. 103 8f, no.87, zhengzhou rd., taipei phone : +886-2-2555-7377 fax : +886-2-2555-7350 http://www.hirose.com/tw/ hong kong: hirose electric hongkong trading co., ltd. room 1001, west wing, tsim sha tsui centre, 66 mody road, tsim sha tsui east, kowloon, hong kong phone : +852-2803-5338 fax : +852-2591-6560 http://www.hirose.com/hk/ india: hirose electric singapore pte. ltd. delhi liaison office office no.552, regus-green bo ulevard, level5, tower c, sec62, plot b-9a, block b, noida, 201301, uttar pradesh, india phone : +91-12-660-8018 fax : +91-120-4804949 http://www.hirose.com/sg/ singapore: hirose electric singapore pte. ltd. 10 anson road #26-16, international plaza 079903, singapore phone : +65-6324-6113 fax : + 65-6324-6123 http://www.hirose.com/sg/ india: hirose electric singapore pte. ltd. bangalore liaison office unit no-403, 4th floor, no-84, barton centre, mahatma gandhi (mg) road, bangalore 560 001, karnataka, india phone : +91-80-4120 1907 fax : +91-80-4120 9908 http://www.hirose.com/sg/ malaysia: penang representative office 1-21-01, suntech @ penang cybercity (1164), lintang mayang pasir 3,11950, bayan baru, penang, malaysia. phone : +604-619-2564 fax : +604-619-2574 http://www.hirose.com/sg/ thailand: bangkok office (representative office) unit 4703, 47th fl., 1 empire tower, south sathorn road, yannawa, sathorn, bangkok 10120 thailand phone : +66-2-686-1255 fax : +66-2-686-3433 http://www.hirose.com/sg/
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. powered by tcpdf (www.tcpdf.org) 1 2017.5 ? 5pq#puupndpoubdujnqspwftuifeftjhoqfyjcjmjuz 5bqfstpobmmjoofsxbmmt product length : l=0.5(n-1)+2.5 *n : number of positions depth : 3.8mm height : 1.0mm ? fh34srj differential impedance yqtsjtfujnf ? ? top/bottom contact ? smooth fpc / ffc insertion 5(35%5; 5jnf ot
dpoofdups '1$ 4 4qfd features 1. low-profile with the 1.0mm above the board and width of 3.8mm the connectors are used in space saving applications. 2. increased fpc/ffc retention as compared with existing similar construction connectors : * in horizontal direction : approximately 2.6 times higher * in vertical direction : approximately 2 times higher 3. unique back-flip rotating actuator the rotating actuator opens from the back of the connector, assuring reliable electrical and mechanical connection. 4. easy fpc insertion and reliable electrical connection proven flip lock actuator allows easy insertion of fpc and provides a tactile sensation when fully closed, confirming complete electrical and mechanical connection. 5. delivered with the actuator open fpc/fpc can be immediately inserted without the need for the opening of the actuator. 6. accepts standard fpc thickness 0.3mm thick standard flexible printed circuit (fpc) can be used. this is the only ultra-low profile zif connector using standard fpc. 7. conductive traces on the pcb can run under the connector no exposed contacts on the bottom of the connector. 8.halogen-free * *as defined by iec61249-2-21 br-900ppm maximum, cl-900ppm maximum, cl + br combined-1,500ppm maximum 9. board placement with automatic equipment flat upper surface and tape and reel packaging facilitate vacuum pick-up and placement. standard reel packaging contains 5000 connectors. fig.1 fig.2 fig.3 fig.4 ? 3.8mm depth 0.5mm pitch, 1.0mm above the board top and top/bottom contact, back-flip actuator flexible printed circuit & flexible flat cable zif connectors fh34srj series in cases where the application will demand a high level of reliability, such as automotive, please contact a company representative for further information. fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 2 product specifications ratings current rating 0.5a (note 1) voltage rating 50vrms ac operating temperature range : -55 to +85? (note 2) operating humidity range : relative humidity 90% max. (no condensation) storage temperature range : -10 to +50? (note 3) storage humidity range : relative humidity 90% max. (no condensation) recommended fpc/ffc thickness : 0.3 ?0.03 mm, gold plated contact pads item specification conditions 1. insulation resistance 500m?min. 100v dc 2. withstanding voltage no flashover or insulation breakdown 250vrms ac / 1 minute 3. contact resistance 100m?max. * including fpc and ffc conductor resistance 1ma, ac / dc 20mv max (ac : 1khz) 4. durability contact resistance : 100m?max. no damage, cracks, or parts dislocation 20cycles 5. vibration no electrical discontinuity of 1? or longer contact resistance : 100m?max. no damage, cracks, or parts dislocation frequency : 10 to 55 hz, single amplitude of 0.75 mm, 10 cycles in each of the 3 axis 6. shock no electrical discontinuity of 1? or longer contact resistance : 100m?max. no damage, cracks, or parts dislocation acceleration of 981m/s 2 , 6 ms duration, sine half- wave, 3 cycles in each of the 3 axis 7. humidity (steady state) contact resistance : 100m?max. insulation resistance : 50m?min. no damage, cracks, or parts dislocation 96 hours at 40? and humidity of 90 to 95% 8. temperature cycle contact resistance : 100m?max. insulation resistance : 50m?min. no damage, cracks, or parts dislocation temperature : -55? / +15? to +35? / +85? / +15? to +35? time: 30 / 2 to 3 / 30 / 2 to 3 minutes 5 cycles 9. resistance to soldering heat no deformation of components affecting performance reflow : at the recommended temperature profile manual soldering: 350? ?0? for 5 seconds (note 3) note1 : when passing the current through all of the contacts, use 70% of the rated current. note2 : includes temperature rise caused by current flow. note3 : the term "storage" refers to products stored for a long period prior to mounting and use. the operating temperature and humidity range covers the non-conducting condition of installed connectors in storage, shipment or during transportation after board mounting. materials / finish part material finish remarks insulator lcp color : gray ul94v-0 pa color : black lcp(8pos.) contacts phosphor bronze gold plating with nickel barrier ??? metalfittings phosphor bronze pure tin reflow plating ??? product number structure refer to the chart below when determining the product specifications from the product number. please select from the product numbers listed in this catalog when placing orders. fh 34s rj ? 30s ? 0.5 sh ( 50 ) ^ _ ` a b c d ^ series name : fh b contact pitch : 0.5mm _ series no. : 34s c termination type sh : smt horizontal mounting type ` rj top and bottom contact, halogen-free (flame retardance ul94v-0). d specifications (50)? standard product 5,000 pcs/reel (99)? 500 pcs/reel a number of contacts : 4 to 50 fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 3 number of contacts contact no.1 polarization mark cav no. number of contacts indicator hrs mark lot no. connector dimensions unit : mm part no. hrs no. no. of contacts abcd fh34srj-4s-0.5sh(50) 580-1238-7 50 4 4 1.5 2.53 3.38 fh34srj-5s-0.5sh(50) 580-1264-7 50 5 4.5 2 3.03 3.88 fh34srj-6s-0.5sh(50) 580-1236-1 50 6 5 2.5 3.53 4.38 fh34srj-7s-0.5sh(50) 580-1200-0 50 7 5.5 3 4.03 4.88 fh34srj-8s-0.5sh(50) 580-1231-8 50 8 6 3.5 4.53 5.38 fh34srj-9s-0.5sh(50) 580-1262-1 50 9 6.5 4 5.03 5.88 fh34srj-10s-0.5sh(50) 580-1251-5 50 10 7 4.5 5.53 6.38 fh34srj-11s-0.5sh(50) 580-1258-4 50 11 7.5 5 6.03 6.88 fh34srj-12s-0.5sh(50) 580-1253-0 50 12 8 5.5 6.53 7.38 fh34srj-14s-0.5sh(50) 580-1252-8 50 14 9 6.5 7.53 8.38 fh34srj-16s-0.5sh(50) 580-1259-7 50 16 10 7.5 8.57 9.38 fh34srj-18s-0.5sh(50) 580-1248-0 50 18 11 8.5 9.57 10.38 fh34srj-20s-0.5sh(50) 580-1256-9 50 20 12 9.5 10.57 11.38 fh34srj-22s-0.5sh(50) 580-1254-3 50 22 13 10.5 11.57 12.38 fh34srj-24s-0.5sh(50) 580-1255-6 50 24 14 11.5 12.57 13.38 fh34srj-26s-0.5sh(50) 580-1247-8 50 26 15 12.5 13.57 14.38 fh34srj-30s-0.5sh(50) 580-1232-0 50 30 17 14.5 15.57 16.38 fh34srj-34s-0.5sh(50) 580-1261-9 50 34 19 16.5 17.53 18.38 fh34srj-40s-0.5sh(50) 580-1260-6 50 40 22 19.5 20.53 21.38 fh34srj-45s-0.5sh(50) 580-1265-0 50 45 24.5 22 23.03 23.88 fh34srj-50s-0.5sh(50) 580-1266-2 50 50 27 24.5 25.53 26.38 tape and reel packaging. order by number of reels.

note 1 : the coplanarity of each terminal lead within specified dimension is 0.1mm max. note 2 : packaged on tape and reel only. check packaging specification. note 3 : slight variations in color of the plastic compounds do not affect form, fit or function of the connector. note 4 : after reflow, the terminal plating may change color, however this does not represent a quality issue. fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 4 recommended pcb mounting pattern b x 0.30.05 0.065 nx x 0.1 contact no.1 connector image : underside 0.25 0.25 2.9 0.15 0.15 0.185 0.5 e0.1 0.80.05 0.80.05 3.30.05 f0.1 /? recommended fpc/ffc dimensions unit : mm part no. hrs no. no. of contacts befg fh34srj-4s-0.5sh(50) 580-1238-7 50 4 1.5 3.1 3.9 2.5 fh34srj-5s-0.5sh(50) 580-1264-7 50 5 2 3.6 4.4 3 fh34srj-6s-0.5sh(50) 580-1236-1 50 6 2.5 4.1 4.9 3.5 fh34srj-7s-0.5sh(50) 580-1200-0 50 7 3 4.6 5.4 4 fh34srj-8s-0.5sh(50) 580-1231-8 50 8 3.5 5.1 5.9 4.5 fh34srj-9s-0.5sh(50) 580-1262-1 50 9 4 5.6 6.4 5 fh34srj-10s-0.5sh(50) 580-1251-5 50 10 4.5 6.1 6.9 5.5 fh34srj-11s-0.5sh(50) 580-1258-4 50 11 5 6.6 7.4 6 fh34srj-12s-0.5sh(50) 580-1253-0 50 12 5.5 7.1 7.9 6.5 fh34srj-14s-0.5sh(50) 580-1252-8 50 14 6.5 8.1 8.9 7.5 fh34srj-16s-0.5sh(50) 580-1259-7 50 16 7.5 9.1 9.9 8.5 fh34srj-18s-0.5sh(50) 580-1248-0 50 18 8.5 10.1 10.9 9.5 fh34srj-20s-0.5sh(50) 580-1256-9 50 20 9.5 11.1 11.9 10.5 fh34srj-22s-0.5sh(50) 580-1254-3 50 22 10.5 12.1 12.9 11.5 fh34srj-24s-0.5sh(50) 580-1255-6 50 24 11.5 13.1 13.9 12.5 fh34srj-26s-0.5sh(50) 580-1247-8 50 26 12.5 14.1 14.9 13.5 fh34srj-30s-0.5sh(50) 580-1232-0 50 30 14.5 16.1 16.9 15.5 fh34srj-34s-0.5sh(50) 580-1261-9 50 34 16.5 18.1 18.9 17.5 fh34srj-40s-0.5sh(50) 580-1260-6 50 40 19.5 21.1 21.9 20.5 fh34srj-45s-0.5sh(50) 580-1265-0 50 45 22 23.6 24.4 23 fh34srj-50s-0.5sh(50) 580-1266-2 50 50 24.5 26.1 26.9 25.5 nx contact no.1(top contact) (uncovered area) b 0.50.07 g0.05 0.50.07 r0.20.1 0.5 0.30.03 0.30.03 0.03 z z contact no.1(bottom contact) 1.50.3 2.50.3 (stiffener) p nx pcb mounting pattern image 0.250.03 0.650.03 3.30.03 0.80.03 e0.03 f0.03 0.5 b y y 0.03 recommended stencil pattern (recommended stencil thickness : t=0.1mm) note 1 : dimension p shall be 0.5mm min. note 2 : the recommended fpc pattern above has been designed only for fh34srj series. when using the fpc for fh19sc series (lower contact), uncoverd area shall be 2.50.3mm and stiffener shall be 3.5mm min. /? recommended pcb mounting pattern and metal mask dimensions y fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 5 /? recommended fpc construction 1. using single-sided fpc fpc : flexible printed circuit fpc : flexible printed circuit material name material material thickness (m) 2. using double-sided fpc 1. this specification is a recommendation for the construction of the fh34srj series fpc and ffc (t=0.3 0.03). 2. for details about the construction, please contact the fpc/ffc manufacturers. * to prevent release of the fpc due to its bending, use of the double sided fpc with copper foil on the back side is not recommended. covering film layer cover adhesive polyimide 1 mil thick 25 25 material name material material thickness (m) 3. using ffc ffc : flexible flat cable * tolerance of 20m. material name material material thickness (m) ? contact fpc manufacturer for specific details. surface treatment 0.2m thick gold plated over 1 to 5m thick nickel underplating 3 copper foil base adhesive base film reinforcement material adhesive stiffener cu 1oz thermosetting adhesive polyimide 1 mil thick thermosetting adhesive polyimide 7 mil thick 35 25 25 35 175 total 298 polyester film adhesive thermoplastic polyester (12) (30) 35 30 12 30 188 295 gold plated annealed copper foil adhesive polyester adhesive stiffener polyester polyester polyester total (25) (25) covering layer film cover adhesive polyimide 1 mil thick surface treatment 0.2m thick gold plated over 1 to 5m thick nickel underplating 3 through-hole copper copper foil base adhesive base film base adhesive cu cu 1/2oz thermosetting adhesive polyimide 1 mil thick 15 18 18 25 18 copper foil cover adhesive covering film layer reinforcement material adhesive stiffener cu 1/2oz thermosetting adhesive polyimide 1 mil thick thermosetting adhesive polyimide 4 mil thick (18) 25 25 50 100 total 297 fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 6 400mm min(leader) 100mm min (empty) 1600mm min (trailer ~ empty) embossed carrier tape top cover tape direction of unreeling (l : inside) ?13 (m : outside) ?380 ?80 24mm max direction of unreeling 40.1 1.95 80.1 ?1.5 +0.1 0 1.750.1 j0.1 h0.3 2 0.3 32mm min 40.1 80.1 ?1.5 +0.1 0 1.7 +0.15 0 2 0.3 1.95 1.750.1 j0.1 k0.1 h0.3 direction of unreeling 1.5 +0.1 0 /? packaging specification ? reel dimensions ? embossed carrier tape dimensions (tape width 24mm max.) ? embossed carrier tape dimensions (tape width 32mm min.) unit : mm part no. hrs no. no. of contacts hjklm fh34srj-4s-0.5sh(50) 580-1238-7 50 4 16 7.5 ? 17.4 21.4 fh34srj-5s-0.5sh(50) 580-1264-7 50 5 ? fh34srj-6s-0.5sh(50) 580-1236-1 50 6 ? fh34srj-7s-0.5sh(50) 580-1200-0 50 7 ? fh34srj-8s-0.5sh(50) 580-1231-8 50 8 ? fh34srj-9s-0.5sh(50) 580-1262-1 50 9 ? fh34srj-10s-0.5sh(50) 580-1251-5 50 10 ? fh34srj-11s-0.5sh(50) 580-1258-4 50 11 ? fh34srj-12s-0.5sh(50) 580-1253-0 50 12 24 11.5 ? 25.4 29.4 fh34srj-14s-0.5sh(50) 580-1252-8 50 14 ? fh34srj-16s-0.5sh(50) 580-1259-7 50 16 ? fh34srj-18s-0.5sh(50) 580-1248-0 50 18 ? fh34srj-20s-0.5sh(50) 580-1256-9 50 20 ? fh34srj-22s-0.5sh(50) 580-1254-3 50 22 ? fh34srj-24s-0.5sh(50) 580-1255-6 50 24 ? fh34srj-26s-0.5sh(50) 580-1247-8 50 26 ? fh34srj-30s-0.5sh(50) 580-1232-0 50 30 32 14.2 28.4 33.4 37.4 fh34srj-34s-0.5sh(50) 580-1261-9 50 34 fh34srj-40s-0.5sh(50) 580-1260-6 50 40 44 20.2 40.4 45.4 49.4 fh34srj-45s-0.5sh(50) 580-1265-0 50 45 fh34srj-50s-0.5sh(50) 580-1266-2 50 50 fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 7 max 250? start temperature(?) time (seconds) 25? (60 sec.) (60 sec.) 90 to 120 sec. preheating soldering 0 50 100 150 150? 200? 230? 200 250 hrs test condition solder method : reflow, ir/hot air environment : room air solder composition : paste, 96.5%sn/3.0%ag/0.5%cu (senju metal industry, co., ltd.'s part number: m705-221cm5-42-10.5) test board : glass epoxy 18.3mm32.85mm0.8mm thick land dimensions : 0.3mm0.8mm metal mask : 0.250.650.1mm thick the temperature profiles shown are based on the above conditions. in individual applications the actual temperature may vary, depending on solder paste type, volume / thickness and board size / thickness. consult your solder paste and equipment manufacturer for specific recommendations. /? temperature profile fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 8 actuator open actuator close pcb pcb fpc fpc /? operation and precautions operation 1. as delivered 2. fpc/ffc insertion 3. fpc/ffc insertion (the top contact specification) delivered with the actuator open. there is no need to operate the actuator prior to inserting the fpc/ffc. | precautions ~ do not close the actuator without the fpc/fpc inserted. be sure that the fpc is parallel to the surface of the pcb, then completely insert into the connector. | caution ~ do not attempt to insert the fpc if actuator is closed. ~ if the actuator is closed and if the fpc is twisted during insertion, it can cause contact deformation and / or contact failure. proper insertion skewed insertion shallow insertion ^ insert the fpc/ffc with the conductive surfaces facing up. align the fpc/ffc straight with the connector and insert it firmly all the way. caution : handle connectors carefully, as they are very small and thin. please refer to this section for verification of the following points: ^ the actuator packaged in the open condition. the actuator packaged in the open condition. boundary of fpc pattern edge of housing opening boundary of fpc pattern edge of housing opening ^ exercise care when handling connectors. follow recommendations given below. fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 9 operation do not press down on the actuator or housing do not press down on the actuator or housing lift at the center lift at the center do not rotate the actuator by the ends do not rotate the actuator by the ends flip actuator up to open flip actuator up to open do not apply force to the actuator in the direction shown when it is fully open. opening to an angle greater than 90c will break or damage the connector. do not apply force to the actuator in the direction shown when it is fully open. opening to an angle greater than 90c will break or damage the connector. lift at the center lift at the center do not rotate the actuator by the ends do not rotate the actuator by the ends . locking . fpcffc remoal lock release ^ after fpc/ffc insertion, rotate the actuator down to a full stop, pushing it at the center. ^ carefully rotate the actuator up to 90? lifting it at the center. * this connector uses a back flip type structure. the insert direction of the fpc and the actuator are different from front flip type connectors. do not to try to open the actuator from the fpc side. /? operation and precautions rotate rotate fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 10 fpc fpc stiffener film pcb pcb stiffener film component part pcb operation 6. fpc routing ^ fpc should be routed in a manner that no strain or load is exerted onto the fpc. placing any strain on the fpc may result in unintentional disconnect or damage to the fpc, which can lead to issues such as contact failure. | caution ~ do not allow the fpc or stiffener to touch the casings, housings or any other items. ~ when routing the fpc, make sure that no strain or load is applied to the connector in a pulling, pushing or side-to-side motion. additionally, make sure that no excessive upward or downward force is applied to the connector. ~ when routing the fpc, make sure that there is a stress free path for the fpc and the stiffener is parallel to the pcb. observe correct bend radiuses. ~ do not place or mount any parts that will interfere with the fpc routing. /? operation and precautions e fpc routing . fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 11 /? operation and precautions precautions when mounting connectors on the pcb s handling before mounting on pcb y insertion of the fpc/ffc or operation of the actuator prior to mounting on the pcb is not recommended. s pc board warpage minimize the warpage as much as possible. the connecto r are straight within 0.1 mm max. make sure that the mounting area flatness can accept the connector terminals without caus ing any failure of the solder joints. s forces on the board s when braking the large pc board into individual boards exercise care not to damage the installed connectors. s when attaching the boards or other components with the screws make sure that any stresses will not cause board deflections affecting the mounting areas of the connector. s when hand soldering: ?do not perform hand soldering with the fpc inserted in the connector. * do not apply excessive heat or touch the soldering iron anywhere other than the connector leads. * do not use excessive amount of solder or flux compounds. operation of the actuator or contacts may be affected by excessive amounts of solder or flux compounds. connectors pcb fh34srj series 0.5mm pitch, 1.0mm above the board top and top bottom contact, back-flip actuator flexible printed circuit & flexible flat cabl e zif connectors 12 the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 05/2017. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? usa: hirose electric (u.s.a.), inc. san jose office 2841 junction ave, suite 200 san jose, ca. 95134 phone : +1-408-253-9640 fax : +1-408-253-9641 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. detroit office (automotive) 17197 n. laurel park drive, suite 253, livonia, mi 48152 phone : +1-734-542-9963 fax : +1-734-542-9964 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. boston office 300 brickstone square suite 201, andover, ma 01810 phone : +1-978-662-5255 usa: hirose electric (u.s.a.), inc. headquarters chicago office 2300 warrenville road, suite 150, downers grove, il 60515 phone : +1-630-282-6700 http://www.hirose.com/us/ china: hirose electric technologies (shenzhen) co., ltd. room 09-13, 19/f, office tower shun hing square, di wang commercial centre, 5002 shen nan dong road, shenzhen city, guangdong province, 518008 phone : +86-755-8207-0851 fax : +86-755-8207-0873 http://www.hirose.com/cn/ korea: hirose korea co.,ltd. 250, huimanggongwon-ro, siheung-si, gyeonggi-do, korea, 15083 phone : +82-31-496-7000 or 7124 fax : +82-31-496-7100 http://www.hirose.co.kr/ germany: hirose electric europe b.v. nuremberg office neumeyerstrasse 22-26, 90411 nurnberg phone : +49-911 32 68 89 63 fax : +49-911 32 68 89 69 http://www.hirose.com/eu/ germany: hirose electric europe b.v. hanover office bayernstr. 3, haus c 30855 langenhagen, germany phone : +49-511 97 82 61 30 fax : +49-511 97 82 61 35 http://www.hirose.com/eu/ germany: hirose electric europe b.v. german branch schoenbergstr. 20, 73760 ostfildern phone : +49-711-456002-1 fax : +49-711-456002-299 http://www.hirose.com/eu/ france: hirose electric europe b.v. paris office regus la garenne colombes,place de la belgique, 71 boulevard national la garenne colombes, 92250, france phone : +33 (0) 1 7082 3170 fax : +33 (1) 7082 3101 http://www.hirose.com/eu/ the netherlands: hirose electric europe b.v. hogehillweg #8 1101 cc amsterdam z-o phone : +31-20-6557460 fax : +31-20-6557469 http://www.hirose.com/eu/ united kingdom: hirose electric europe bv (uk branch) 4 newton court, kelvin drive, knowlhill, milton keynes, mk5 8nh phone : +44-1908 202050 fax : +44-1908 202058 http://www.hirose.com/eu/ china: hirose electric (shanghai) co., ltd. 18, enterprise center tower 2, 209# gong he road, jing?an district, shanghai, china 200070 phone : +86-21-6391-3355 fax : +86-21-6391-3335 http://www.hirose.com/cn/ china: hirose electric (shanghai) co.,ltd. beijing branch a1001, ocean international center, building 56# east 4th ring middle road, chaoyang district, beijing, 100025 phone : +86-10-5165-9332 fax : +86-10-5908-1381 http://www.hirose.com/cn/ taiwan: hirose electric taiwan co., ltd. 103 8f, no.87, zhengzhou rd., taipei phone : +886-2-2555-7377 fax : +886-2-2555-7350 http://www.hirose.com/tw/ hong kong: hirose electric hongkong trading co., ltd. room 1001, west wing, tsim sha tsui centre, 66 mody road, tsim sha tsui east, kowloon, hong kong phone : +852-2803-5338 fax : +852-2591-6560 http://www.hirose.com/hk/ india: hirose electric singapore pte. ltd. delhi liaison office office no.552, regus-green bo ulevard, level5, tower c, sec62, plot b-9a, block b, noida, 201301, uttar pradesh, india phone : +91-12-660-8018 fax : +91-120-4804949 http://www.hirose.com/sg/ singapore: hirose electric singapore pte. ltd. 10 anson road #26-16, international plaza 079903, singapore phone : +65-6324-6113 fax : + 65-6324-6123 http://www.hirose.com/sg/ india: hirose electric singapore pte. ltd. bangalore liaison office unit no-403, 4th floor, no-84, barton centre, mahatma gandhi (mg) road, bangalore 560 001, karnataka, india phone : +91-80-4120 1907 fax : +91-80-4120 9908 http://www.hirose.com/sg/ malaysia: penang representative office 1-21-01, suntech @ penang cybercity (1164), lintang mayang pasir 3,11950, bayan baru, penang, malaysia. phone : +604-619-2564 fax : +604-619-2574 http://www.hirose.com/sg/ thailand: bangkok office (representative office) unit 4703, 47th fl., 1 empire tower, south sathorn road, yannawa, sathorn, bangkok 10120 thailand phone : +66-2-686-1255 fax : +66-2-686-3433 http://www.hirose.com/sg/

▲Up To Search▲

Price & Availability of FH34SRJ-45S-05SH

	To Download FH34SRJ-45S-05SH Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .